Select your country
Please select your country
Cart is empty
No items found matching the search criteria
Add some “Electric Viking Deco Spirit” to your weapon with these Ragnarok or Walkure Grips from the Andrew Bawidamann Designer series. Original in design and easy to carry, these Grips are as Aesthetically pleasing as they are Functional.
• TEXTURE: Medium • USE: Carry, Tactical, Range, Competition • MATERIAL: G10, Carbon Fiber
These ship in sets of four in either stainless steel or blued steel for standard and slim line 1911 grips.
The Tactical Diamonds are the response to those who like the texture of a traditional Double Diamond grip but don't like the big diamond pattern around the screw holes. Keep in mind these are very grippy due to the fact that we can cut the diamond pattern a lot sharper in the G10.
• TEXTURE: Very Grippy • USE: Tactical, Tournament Shooter • MATERIAL: G10
The evolution continues! The third offering in the Operator line of grips that we here at VZ started back 12 years ago. The Operator line is not only the best selling textured grip, but the most copied. Form follows function and beauty. With our new stippled texture offering it only made sense to wring out as much function by pairing it with the slants of the Operator series. Combining the two textures just like its predecessors in the series, it becomes a much more functional grip in the sense of allowing it to be used in more applications. From the concealed carry firearm to the tactical and tournament shooter it exceeds in all applications. Not least to mention its beauty that compliments any firearm.
These are the same basic design as the original Operators™, we just replaced the large aggressive checkering next to the front strap with an aggressive golfball pattern. We have also added a thumb recess for the magazine release. This is a very functional grip for the tournament shooter or those in the tactical high speed environment.
• TEXTURE: Very Aggressive • USE: Tactical, IPSC, IDPA, etc... • MATERIALS: G10, Micarta, Carbon Fiber
- For Standard 2011 and Open guns
Freshly designed from the ground up, top of the line Armanov Contoured SpidErgo Grips for full-size 1911 competition pistols made out of finest, most durable, aircraft grade aluminium. Special precision-machined texture, designed to keep your hand tight in place, it will make sure you get the most out of your competition performance. These SpidErgo grips are what you need to prevent any unwanted movement or sliding of your hand.
Freshly designed Armanov SpidErgo Tanfoglio SF Grips are top of the line contoured SpidErgo Grips for your Tanfoglio competition pistol made out of finest, most durable, aircraft grade aluminium. Special precision-machined texture, designed to keep your hand tight in place, it will make sure you get the most out of your competition performance.
These BUL 1911 grips are made from carbon and offer an excellent grip with a wow esthetic factor.
Bushing screws attach directly to the metal frame. Grip plates than center on the bushing screws and attach with grip screws.
Torx Scews for grip 1911.
G10 Grips provides a better grip during rapid shooting and in wet conditions. Comes pre-cut to allow ambi safety. Quick and easy installation for all Government \ Commander size 1911's.
G10 Grips provides a better grip during rapid shooting and in wet conditions. Comes pre-cut to allow ambi safety. Quick and easy installation for all Government / Commander size 1911's.
G10 Grips provides a better grip during rapid shooting and in wet conditions. Comes pre-cut to allow ambi safety. Quick and easy installation for all Ultra / Officer size 1911's.
Hex stainless steel bolt for grip 1911.
Hex Scews for grip 1911.
Torx Scews for grip 1911. Multiple finish options guarante a cool custom look.
This new magwell has cutouts that allow the user to easily strip out a magazine in case of a malfunction and a slimmer profile than the SL magwell that still provides increased surface area for faster reloads without adding significant weight or size to the grip profile while carrying or concealing the gun.
Flat 20LPI. Made from polymer.
Standard grip screw set for 2011.
Aluminium open magwell for SAS II models (Ultimate Racer).
Brass open magwell for SAS II models (Ultimate Racer).
New generation of BUL SAS II grip, with stippled like texture.
Designed for BUL SAS II pistols with STEEL GRIP. (REAR LOWER EDGE IS NOT BEVELED). Can also fit SAS II pistols with polimer grips.
Aluminium STANDARD magwell for SAS II models.
Brass standard magwell dor SAS II models.
This magwell is intended for open division shooters wanting to add weight to their gun with no modifications, this is a "plug and play" part.
For open division - will not fit the IPSC standard division box.
EXTREMELY HEAVY: 597g
Hex Scews for grip 1911
Bushing screws used to secure Bul steel grips at the finger guard to 2011 frame.
Bul stainless steel main grip screws for 2011.
Red checkered diamond wood grips for Bul Ultra 1911 models. These grips offer a solid grip, and cool old school looks.
We always have requests for an aggressive grip for the tactical members and weekend match goers. Something with a little bite. This is what we came up with, a big old nasty 5 dpi (diamond per inch) grip, made in G10. The Diamond Backs are by far the most aggressive grips we produce. We wouldn't recommend them for all day carry, but some do and swear by them.
These grips are a result of the success the VZ FRAG Pattern had in some of our 1911 grips. It only made sense to try it on the CZ 75, and it turned out really nice. They offer a nice medium texture that provides you with plenty of grip. The border on the edge of the grip gives you a nice smooth finish and really accents that VZ FRAG pattern well.
Funnel speeds up your magazine change. Also the grip with the magwell feels better.
When using magwell, short style grips are needed.
Grips fit the Shadow 2.
CZ Full Size RUBBER Grips for CZ 75 85.
Fits all full size models.
The DAA Carbon 1911 Grips are 0.250 inch thick panels which create a surface that provides the flawless grip so critical for recoil control. The carbon offers a striking hi-tech appearance, and unparalleled durability. The tactical design includes a wide, deep, thumb cutaway which allows you unrestricted access to any mag-catch installed on your 1911. The CNC machined Carbon material is light weight extremely touch and is totally resistant to oils and solvents. These carbon grip panels offer not only improved performance when shooting your 1911, but also an attractive dark-colored carbon “techy” appearance. Each set include 4 stainless steel torx screws, with a custom head design, a torx key and are packed in a display-friendly blister-pack.
Go ahead and pop in a new insert. It takes seconds and you will have it looking and functioning like a new magwell again.
A fast reload is essential to be competitive. The STI/SVI Ice® Magwell is the fastest, easiest, most consistent magwell for IPSC competition.
Will Not Fit STI Gen 2 Grips!
Made from Brass that increases the weight of the pistol and improves the balance when shooting. The grips are attached with the factory screws and a spare set is provided. To avoid the grip panels becoming loose we recommend the use of Blue loctite or mild strength thread locker. Self-adhesive grip tape is provided for attachment to each grip panel with a spare set provided. There are also rectangular shaped grip tape for use on the front and backstop of your pistol if allowed by your division rules.
The flared GLOCK Modular Magwell offers the ability for faster reloads especially in high-stress situations where fractions of a second matter.
Grips for CZ Shadow 2 pistol.
The Infinity Firearms® Magazine well available for traditional single stack 1911 pattern guns demonstrates that it is possible to build a better mousetrap. This magazine well attaches to the firearm by means of a specially machined mainspring housing. The lower front portion of the mainspring housing is machined to allow a projection from the magazine well to interlock around the mainspring housing retaining pin.
Kummer CZ Alu DotMatrix 3D Grips are 3D designed and CNC machined, providing an aggressive texture that gives the shooter a confident grip no matter the situation. Whether upgrading your existing pistol or designing the optimal competition pistol, these grips offer the sure grip that every shooter needs.
Kummer CZ Alu DotMatrix ERGO Grips are 3D designed and CNC machined, they have a golf ball pattern that provides enough texture to give the shooter confidence that they can grip the gun no matter the situation. Whether you are upgrading your existing pistol or designing the optimal competition pistol, these grips offer the sure grip that every shooter needs.
Similar to original thickness, Kummer Corundum Grips offer enhanced grip due to grip tape inserts. They also improve aesthetics of your firearm.
Colored Aluminium grips for CZ 75 Models in long version with checkering that is extremely grippy.
The checkering is CNC cut in the surface and has straight angles and is circular ( 360° directional grip) , therefore has more grip than any other on the market.
Matching the color is difficult on the picture due to no uniformity in devices so please look for the color on the group picture for closest resemblance of the original color.
Short grips are for guns that have a Magazine funnel fitted.
Completely cut from Aluminium on CNC machines.
Color is anodized.
Colored Aluminium grips for CZ Shadow 2 and SP-01 models in long version and short for magwell use with checkering that is extremely grippy.
Long grips are for guns that do NOT have a Magazine funnel fitted
Product Details
Created as an evolution of the original MOE 1911 Grip Panels, the 1911 Grip Panels with TSP texture offers the user a more aggressive texture allowing for better control of the weapon in all environments.Constructed of heavy-duty reinforced polymer, the grips have a unique diamond-shaped cross section to prevent twisting in the hand, an aggressive magazine release cut-out, aggressive TSP texture (Trapezoidal Surface Projections) for positive control, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.
Made in U.S.A.
Features
The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing.
Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.
The newest compact addition for a pistol carbine conversion kit The Micro RONI® is the newest compact addition for a pistol carbine conversion kit. The lightweight and sturdy platform for various Glocks and pistols are made of aluminum with a polymer body. The Micro RONI® features a folding stock for a sturdier position. - No pistol disassembly required – Just place pistol into the kit and lock - Equipped with a long top Picatinny rail, allowing a combination of sight, magnifier, and/or night vision - Provides two extra side Picatinny rails on both right and left for mounting additional accessories - Ambidextrous, easy and fast handling - Ambidextrous trigger-guard safety - Features a right-folding stock for easy concealment and carry - Right and left serrated thumb-rests for better control on recoil and muzzle-rise* (Not Included) - Front extra magazine carrier for fast reload - Front integral tactical light (Not Included) - Front and rear flip-up sight (Not Incldued) - Fits only Glock gen’ 3+4 (with bottom picatinny rail), including compensated models (17, 22, 31 OR 19, 23, 32)* Made Of: Poly+Alum For Glock Weight (ounce(s)):1587g, 56oz MEASURMENTS Width Max: 63,5mm, 2.5in Height Max: 190,5mm, 5.7in Length Max: 348mm, 13.7in Not compatible with Glock 17 Generation 1 & 2 and Glock 19!
Pistol Grips StayHEX23 for KMR Spectra with an innovative design of weights, elegant hexagonal pattern for firm grip and ergonomic shape that fits to the hand perfectly.
PICTURES SHOW KMR URBRA
Tanfoglio GU-011 Aluminium grips for small frame 630.
Tanfoglio unica (unique in italian) is a parts and accessories line that offers the opportunity to customize tanfoglio pistols with originality and creativity. Unica products have high quality standards, durability and a daring colouring: they allow to increase shooting performance and to enrich the pistol with plays of colors.
Choose your color, choose your style, make your tanfoglio unique!
Designed for any 8-round magazine with standard or extended base pad and/or 10-round magazines, the Techwell System enhances shooter’s grip and aids in fast, positive magazine changes for an edge in competition or combat.
