Pistol parts

The DAA Carbon 1911 Grips are 0.250 inch thick panels which create a surface that provides the flawless grip so critical for recoil control. The carbon offers a striking hi-tech appearance, and unparalleled durability. 
The tactical design includes a wide, deep, thumb cutaway which allows you unrestricted access to any mag-catch installed on your 1911. 

The CNC machined Carbon material is light weight extremely touch and is totally resistant to oils and solvents. 

These carbon grip panels offer not only improved performance when shooting your 1911, but also an attractive dark-colored carbon “techy” appearance. 

Each set include 4 stainless steel torx screws, with a custom head design, a torx key and are packed in a display-friendly blister-pack.

FEATURES

• Caliber .40 S&W
• Capacity 15 High Cap Extended

1. Increased capacity to 15-rounds with "Plus-2" Adapter
2. Only 5/8" longer than flush-fit magazines
3. Redesigned tube to improve functionality, heat-treated for strength
4. Anti-Friction Coating allows for easy loading and superior anti-corrosion properties
5. Interlinked internal components

*This magazine will not work in Taurus PT-111 G2 pistols

MEC-GAR Sig Sauer P226 magazine with AFC and 20rdn capacity with +2 basepad. 

FEATURES

• Caliber .45
• Capacity 11 Extended

Brass open magwell for SAS II models (Ultimate Racer).

Brass standard magwell dor SAS II models.

Aluminium open magwell for SAS II models (Ultimate Racer).

Aluminium STANDARD magwell for SAS II models.

Standard grip screw set for 2011.

- R-edition Lightweight hammer 12835

-R-edition Disconector 12517

-R-edition Sear 12417

all parts are Fully Machined SS

Torx Scews for grip 1911. Multiple finish options guarante a cool custom look.

The 11-Coil (125-140mm mags) DAA 2011 magazine springs are made from hi-quality spring wire, and carefully formed and manufactured to maximize reliability, capacity and longevity.

Kit consisting of

Floating trigger pin, Barrel bushing SP-01, Ultra lite set, Race hammer kit, Sear spacer, Trigger return spring, Hammer pin, Shadow 2 only disconnector. 

Straight single action aluminum trigger with pre-and over-travel adjustment.  All Cajun Gun Works supplied triggers include a 1.5mm allen wrench for your convenience.  This trigger is now a Cajun Gun Works product proudly “Made in the USA”!

TECH TIP:  This is a “conversion” trigger and completely disables the double action feature.  When installing this trigger you will need our TR-PIN as a replacement for the throw away CZ OEM trigger pin, and our SP starter punch for removing the CZ OEM trigger pin.  Remove the disconnector when installing this trigger.  This trigger cannot be used in any CZ decocker.

barrel bushing for the “standard barrel” 9mm manual safety and decocker pistols.  Fits: 75B in 9mm (will not fit the 75B .40, see our 7510X), P-01, PCR, 75B Compact, 85C and 85B.  Made from 4140 and heat treated to RC45.  Reduces barrel muzzle play to -0- at lock-up.  This is a direct replacement for the OEM bushing.  Fits .504” OD CZ’s.  USPSA Production Approved.

NOTE:  Some minor fitting may be required typically at the #46 retaining pin groove.

IDPA Production Legal upgrade kit for the manual safety CZ 75 models.  Fits all “classic” lock work manual safety 75 and 40B, including SP-01.  Everything you need excluding tools.  Our starter punch, part number SP is highly recommended.  Absolutely No Substitutions.

IDPA production legal, full upgrade kit. Includes everything for a 100% compliant competition ready drop-in package for all manual safety 75 series, 75B, 75B Compact, 40B, and SP-01, etc. NOTE: Recommended “Competition” and “Race” gun use only.Produces a 3# or less SA pull weight, not recommended for self-defense use. For all other applications, see our 75100 and 75110 upgrade kits. Absolutely No Substitutions.

Shadow 2 Reach Reduction Kit with ultra-short reset now USPSA Production approved.  Cajun Gun Works’ famous RRK that permanently re-positions the trigger rearward with the hammer fully lowered an amazing 5 mm’s and reduces single action pre-travel dramatically.  Includes our “old style” stainless steel 85C trigger “Made in the USA”  with pre and over-travel screws so you can custom tune to your CZ.

This not only relocates the trigger, but it also doubles as an ultra-short reset for single action.  

Includes 2 different hammer pins (1 x HPIN and 1 x 75009) so you can be assured a secure attachment to either the factory hammer or Cajun Gun Works hammer.  Lifetime warranty to the original purchaser

New Shadow 2 ultra-short reset disconnector.   After extensive testing, we have engineered a new disco just for the Shadow 2.  This part will drop into most S-2’s and require no fitting, however, due to the timing variations from pistol to pistol, some very slight fitting may be needed on some S-2’s.

This ''Follower Kit'' includes: A "Grams Format" follower (CL) & (13coil) spring. For use in CZ "large frame" (Tactical Sport/Checkmate), 9x19 or 40&w magazines, that measure up to 171mm long (with a base pad attached).

Product Details

Similar in concept to the Magpul Ranger Plate™ for AR15/M16 magazines, the SpeedPlate allows for rapid magazine extraction and positive handling. Protects the base of magazine from impact.

The SpeedPlate replaces the floorplate on all factory Fully Metal Lined (FML) GLOCK 9mm and .40S&W double-stack pistol magazines.*

*NOTE: SpeedPlate is NOT compatible with the Magpul® GL9 series of PMAGs®.

Made in U.S.A.

The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing.

Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.

Made in U.S.A.

Features

• Fits Full Size Frame 1911s and copies with standard grip screw bushings
• Reinforced polymer construction
• Unique diamond-shaped cross-section to prevent twisting in the hand
• Aggressive magazine release cut-out
• Compatible with ambidextrous safeties
• Positive, anti-slip texture

spring not included

FEATURES

Aluminum "Plus-2" adapter to fit on Mec-Gar magazines with a metal floorplate.

1. 7075 aircraft grade hard anodized Aluminum
2. Notch in front offers guide in handling during magazine change!
3. Available in Blue, Red or Grey
4. Does not leave gap between frame and floorplate

Contains:

• 1 - Aluminum "Plus-2" adapter
• 1 - Locking plate - Metal

 If used to replace a polymer floorplate this item will leave a gap between the frame and floorplate!  Use item F42223-ST for a better fit.

 Fits on the following Mec-Gar magazines:

• MGBRHP13 B/N - Browning HP 9mm 13rd - Adds 1 rounds
• MGBRHP15 B/N - Browning HP 9mm 15rd - Adds 2 rounds
• MGBR4010 B/N - Browning .40 10rd - Adds 1 rounds
• MGCZ7516B - CZ 75B 9mm 16rd - Adds 2 rounds
• MGCZ7514B - CZ 75 Compact 9mm 14rd - Adds 2 rounds
• MGRP8515 B/N - Ruger P85/89/93/94/95 9mm 15rd - Adds 3 rounds
• MGRP8517 B/N - Ruger P85/89/93/94/95 9mm 17rd - Adds 2 rounds
• MGSW5917 B/N - S&W 5900 Series 9mm 17rd - Adds 2 rounds

FEATURES

Replacement floorplate set to increase the capacity on Mec-Gar Optimum Series flush fitting magazines

1. Polymer "Plus-2" magazine extender
2. Phosphate steel locking plate, heat-treated. When ordered the complete base pad with locking plate.

Caliber .45, Caliber 9 mm

The DAA 1911/2011 Ambidextrous Safeties with Shields are precision-made stainless-steel Safeties made with state-of-art Metal Injection Molding (MIM) technology. They are designed for use on any 2011 or 1911 pistol, with some minor fitting required. It is always recommended to have a competent Gun Smith fit safeties!

Take your Shadow 2 or Shadow 1 from great to OMG!  This will transform your S-2, delivering an ice crisp SA of 3 lbs. or less.   DA typically runs 6 lbs. or less using our famous HS-12000 (11.5#) hammer spring.   The disconnector will require minor fitting so you get the reset to a PERFECT 1 mm, which is not difficult to do with CGW tech support.  Turns the CZ lock work into a precision Swiss watch!  USPSA Production legal too!