Pistola

The Next Generation of High Performance Competition Ready Magazines for BUL SAS Styles.

Made from Heat Treated 410 Stainless for Ultimate Durability.

No spacer required for 9mm/.38 magazines.

MBX Complete Tubes were designed to be competition ready with exclusive
features to meet the highest demands for today's shooters.

- All 126mm 9mm/.38 magazines hold 20-21 rounds.

- All 126mm .40/10mm magazines hold 18-19 rounds.

- All 141.25mm 9mm/.38 magazines hold 23-24 rounds.

- All 141.25mm .40/10mm magazines hold 20-21 rounds.

- All 171.25mm 9mm/.38 magazines hold 29-30 rounds.

*Our tubes are designed exclusively to work with MBX Basepads, Springs,
and Followers. These tubes are not designed to work with other manufacturers components.

The tube is designed to work with the MBX Extreme Follower. This is a wider follower with new features that will allow for maximum reliability and capacity.

Witness holes on rear of tube to indicate round count for all tubes.

Kit consisting of

Floating trigger pin, Barrel bushing SP-01, Ultra lite set, Race hammer kit, Sear spacer, Trigger return spring, Hammer pin, Shadow 2 only disconnector. 

New Shadow 2 ultra-short reset disconnector.   After extensive testing, we have engineered a new disco just for the Shadow 2.  This part will drop into most S-2’s and require no fitting, however, due to the timing variations from pistol to pistol, some very slight fitting may be needed on some S-2’s.

CHARGING HANDLE GLOCK

Colored Aluminium grips for CZ 75 Models in long version with checkering that is extremely grippy. 

The checkering is CNC cut in the surface and has straight angles and is circular ( 360° directional grip) , therefore has more grip than any other on the market.

Matching the color is difficult on the picture due to no uniformity in devices so please look for the color on the group picture for closest resemblance of the original color.

Short grips are for guns that have a Magazine funnel fitted.

Completely cut from Aluminium on CNC machines.

Color is anodized.

Glock Factory Connector

Install the 4 pound connector! A standard Glock has 5,5 pound triggerpull !!

This part replaces the factory connector and provides a lighter trigger pull. This will increase the accuracy of most shooters by reducing the amount of muzzle movement when pulling the trigger. 

Your trigger pull will be 4 lbs when you keep the 6 lbs factory firing pin spring, but if you Change that one out for a competition firing pin spring of 4 lbs you will get the 3,5 lbs trigger.

Less experienced shooters should ask a gunsmith to install this item.

Recoil spring for all 1911 and 2011 pistols , color coded for strength.

For Shadow 2 and Tactical sport need to be fitted 

This ''Follower Kit'' includes: A "Grams Format" follower (CL) & (13coil) spring. For use in CZ "large frame" (Tactical Sport/Checkmate), 9x19 or 40&w magazines, that measure up to 171mm long (with a base pad attached).

We always have requests for an aggressive grip for the tactical members and weekend match goers. Something with a little bite. This is what we came up with, a big old nasty 5 dpi (diamond per inch) grip, made in G10. The Diamond Backs are by far the most aggressive grips we produce. We wouldn't recommend them for all day carry, but some do and swear by them.

CZ 75 TS Main Spring Plug

These grips are a result of the success the VZ FRAG Pattern had in some of our 1911 grips. It only made sense to try it on the CZ 75, and it turned out really nice. They offer a nice medium texture that provides you with plenty of grip. The border on the edge of the grip gives you a nice smooth finish and really accents that VZ FRAG pattern well.

Hammer pin retaining peg CZ 75/85

MAGAZINE BOTTOM 19R CZ SHADOW 2

Cannot be used with the funnel.

MAGWELL for Shadow 2 

Speeding up your magazine insertion is one of the things to beat the competition. Also the grip with the Magwell feels beter. About the grips , they indeed need to be the short ones.

Here you find the short grips.

CGW’s new P-10-C short reset trigger.   Drops in and produces a reduction in pre-travel.  Deep inside the trigger we have installed a 3 mm x 6 mm pre-travel screw for those that want to custom tune their trigger for the ultimate in trigger control.  The trigger is curved to position the trigger finger in the center of the trigger, resulting in a more consistent trigger pull.  This curve also helps keep the trigger finger away from the bottom tip of the trigger.  Made from billet aluminum.

This trigger is longer than the stock P-10-C plastic trigger, and has been extended as close to the bottom of the trigger guard as reliably possible.  This longer trigger, combined with the curve, virtually eliminates  trigger “sting” or “bite”.  The center pivot is flush with the trigger face during use, resulting in a comfortable “all day” trigger.

Safety detent plunger spring

0420-0480-01ND

Safety Set (right+left) Shadow2. See picture for reference #14#29.

CZ Shadow 2 Safety Wide Right side, only Wing.

CZ Full Length New Design Guide Rod for:
• CZ 75 SP-01 Shadow
• CZ 75 Tactical Sports
• CZ 75 SP-01 Phantom
• CZ 75 SP-01 Shadow Line
• CZ 75 SP-01 Shadow Orange
• CZ 75 SP-01

Legal in IPSC Production Division. 

STEEL RECOIL SPRING GUIDE ROD CZ75 SP-01 AND CZ75 TS

The DAA Carbon 1911 Grips are 0.250 inch thick panels which create a surface that provides the flawless grip so critical for recoil control. The carbon offers a striking hi-tech appearance, and unparalleled durability. 
The tactical design includes a wide, deep, thumb cutaway which allows you unrestricted access to any mag-catch installed on your 1911. 

The CNC machined Carbon material is light weight extremely touch and is totally resistant to oils and solvents. 

These carbon grip panels offer not only improved performance when shooting your 1911, but also an attractive dark-colored carbon “techy” appearance. 

Each set include 4 stainless steel torx screws, with a custom head design, a torx key and are packed in a display-friendly blister-pack.

The DAA 1911/2011 Ambidextrous Safeties with Shields are precision-made stainless-steel Safeties made with state-of-art Metal Injection Molding (MIM) technology. They are designed for use on any 2011 or 1911 pistol, with some minor fitting required. It is always recommended to have a competent Gun Smith fit safeties!