Pistol parts

Short grip is designed to be used with magwell.

The Zev Technologies© Competition Spring Kit contains a heavy trigger spring (heavier is better, as it assists with trigger pull), A reduced power firing pin spring, and a reduced power firing pin safety spring.

Engineered to provide users with a consistent, positive reset and a reduction in trigger pull weight without sacrificing the reliability or safety of your pistol. Whether used in conjunction with a ZEV trigger or with your stock Glock trigger, the PRO connector will provide a noticeable increase in performance and is ready to drop-in and use straight from ZEV, no fitting or polishing required.

ZEV Trigger Bar: the ONLY professional GLOCK replacement trigger bar that reduces travel, and provides professional, crisp trigger pull while keeping all factory Glock safeties intact

ZEV Trigger Bar: the ONLY professional GLOCK replacement trigger bar that reduces travel, and provides professional, crisp trigger pull while keeping all factory Glock safeties intact.

At the core of our PRO trigger is ZEV's new proprietary trigger bar and professional connector. These products deliver the crispest, cleanest trigger pull available. Finally, our new trigger pad features a revolutionary riveted assembly process that makes it the longest lasting and most reliable replacement trigger on the market

At the core of our PRO trigger is ZEV's new proprietary trigger bar and professional connector. These products deliver the crispest, cleanest trigger pull available. Finally, our new trigger pad features a revolutionary riveted assembly process that makes it the longest lasting and most reliable replacement trigger on the market.

ZEV Trigger Bar: the ONLY professional GLOCK replacement trigger bar that reduces travel, and provides professional, crisp trigger pull while keeping all factory Glock safeties intact.

When looking to upgrade the performance of a 1911 pistol, a common improvement sought by shooters is a high-quality trigger job, with a crisp, clean break. Until now, a high-quality trigger job has never been in the realm of a “drop-in” upgrade. Nighthawk Custom has changed that with the introduction of our Drop-In Trigger System (DTS) for 1911 pistols. An all-in-one unit, the DTS replaces your existing hammer, hammer strut, sear, disconnector, and sear spring. Your existing sear pin and hammer pin will be retained for use with the DTS, but no other parts are necessary for installation

Stainless Steel Bullesteros oversized mag release button for 2011.

Oversizded magazine catch button makes it easier to hit the button while in motion.

RC-tech Progressive recoil Spring for CZ and TANFOGLIO pistols. Made form quality steel wire. Designed to manipulate recoil and to fine tune your pistol to your ammunition and load further improving perfrmance.

____________________

NOTE:

• Sold in sets of 2 springs

CZ 75 TS magazine catch.

FEATURES:

3 position of mag. catch enlargement.

Armanov Magazine Limiter is a simple and cheap solution for IPSC shooters. Never get your count wrong again. Works with all Mec-Gar double stack magazines with +2 rounds magazine base pads.

Tanfoglio Xtreme Firing Pin Spring is especially designed for Xtreme Firing Pin to improve ignition of your primers.

Tanfoglio Xtreme Firing Pin Spring IS especially designed for Xtreme Firing Pin to improve ignition of your primers.

Freshly designed from the ground up, top of the line Armanov Contoured SpidErgo Grips for full-size 1911 competition pistols made out of finest, most durable, aircraft grade aluminium. Special precision-machined texture, designed to keep your hand tight in place, it will make sure you get the most out of your competition performance. These SpidErgo grips are what you need to prevent any unwanted movement or sliding of your hand. 

RC-tech Alu base pads for Metalform/CobraMag magazines. Adds some weight, style and durability to your magazine for easy, quick and consistent reloading. We also recommend the RC-tech brass plates, which eases assembly/dissasembly and adds a bit of extra weight

BUL Spring and Follower Upgrade kits for SAS II 2011 magazines.

WORKS ONLY WITH ORIGINAL BUL MAGAZINES

Hex stainless steel bolt for grip 1911.

Bul 2011 modular trigger. Trigger shoe A is included in the package.

Extractor with 2 springs and plate

Armanov RACE Magazine Base pad for CZ gives you the best grip and durability. Designed with advanced sports and professional competition shooters. They are legal for IPSC production division and standard division (fits IPSC box) and IDPA. Precise cuts and grooves are machined across 3 sides to ensure you the fastest and the most precise reloads with one hand. The grip is really hard and will stay in place with a tight fit. Base pads also add one round to increase the magazine capacity from 17 to 18 and works perfectly with the standard stock magazine springs.

These baseplates WILL work with original CZ magwells 

Set includes:

1pcs Striker spring Grey 24N

1pcs Striker spring Red 28N

1pcs Striker spring Blue 31N

1pcs Trigger spring

1pcs Firing pin Safety spring

CGW 10X barrel bushing for the .550” diameter heavy barrel SP-01’s – Shadow 2, SP-01 manual safety and SP-01 Tactical in 9mm and .40 S&W.  Also fits 75B in .40.  Made from 4140 carbon steel and heat treated to RC 57-59, vastly superior to the loose fitting, soft, non-heat treated OEM bushing.  Only works with the standard 4.7” barrel, will not work with any extended or threaded barrels.  Reduces barrel muzzle play to -0- at lock-up.  This is a direct replacement for the OEM bushing.  Many shooters have verified a significant improvement in accuracy.

Note:  Very minor fitting may be required, can be installed in minutes with common tools.  Will not work with any threaded or extended barrel.

Freshly made base pad for Glock features a tight grip and deep side grooves which make sure your handling is swift and precise. It adds the extra needed surface area for one-handed manipulation. Magazine base pad fits into the original Glock magazine notches.

Grips fit the Shadow 2.