Pistola

Product Details

Similar in concept to the Magpul Ranger Plate™ for AR15/M16 magazines, the SpeedPlate allows for rapid magazine extraction and positive handling. Protects the base of magazine from impact.

The SpeedPlate replaces the floorplate on all factory Fully Metal Lined (FML) GLOCK 9mm and .40S&W double-stack pistol magazines.*

*NOTE: SpeedPlate is NOT compatible with the Magpul® GL9 series of PMAGs®.

Made in U.S.A.

The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing.

Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.

Made in U.S.A.

Features

• Fits Full Size Frame 1911s and copies with standard grip screw bushings
• Reinforced polymer construction
• Unique diamond-shaped cross-section to prevent twisting in the hand
• Aggressive magazine release cut-out
• Compatible with ambidextrous safeties
• Positive, anti-slip texture

Armanov Magazine Base Pad for CZ 75, Shadow2, SP01 MaxxxGrip style is a revolution for magazine pads.

Armanov Magazine Base Pad for CZ 75, Shadow2, SP01 MaxxxGrip +2Rnd has extremly high gripping force so handling is much more secure and precise. Bottom of magazine pad is covered with special anti-slip material and sides are serrated for maximum grip. This is very important in dynamic sport shooting where you have to change your magazine fast and precise.

Base pad also adds two rounds to increase the magazine  capacity from 17 to 19. Legal for IPSC production division. Compatible with all CZ 75 17rnd capacity magazines. CZ Shaodow2 for CZ and Mec-Gar Magazines.

spring not included

FEATURES

Aluminum "Plus-2" adapter to fit on Mec-Gar magazines with a metal floorplate.

1. 7075 aircraft grade hard anodized Aluminum
2. Notch in front offers guide in handling during magazine change!
3. Available in Blue, Red or Grey
4. Does not leave gap between frame and floorplate

Contains:

• 1 - Aluminum "Plus-2" adapter
• 1 - Locking plate - Metal

 If used to replace a polymer floorplate this item will leave a gap between the frame and floorplate!  Use item F42223-ST for a better fit.

 Fits on the following Mec-Gar magazines:

• MGBRHP13 B/N - Browning HP 9mm 13rd - Adds 1 rounds
• MGBRHP15 B/N - Browning HP 9mm 15rd - Adds 2 rounds
• MGBR4010 B/N - Browning .40 10rd - Adds 1 rounds
• MGCZ7516B - CZ 75B 9mm 16rd - Adds 2 rounds
• MGCZ7514B - CZ 75 Compact 9mm 14rd - Adds 2 rounds
• MGRP8515 B/N - Ruger P85/89/93/94/95 9mm 15rd - Adds 3 rounds
• MGRP8517 B/N - Ruger P85/89/93/94/95 9mm 17rd - Adds 2 rounds
• MGSW5917 B/N - S&W 5900 Series 9mm 17rd - Adds 2 rounds

follower not included

FEATURES

Replacement floorplate set to increase the capacity on Mec-Gar Optimum Series flush fitting magazines

1. Polymer "Plus-2" magazine extender
2. Phosphate steel locking plate, heat-treated

Fits on the following Mec-Gar magazines:

• MGPB9210 B/N - Beretta 92FS 9mm 10rd (dimpled) - Does not add capacity
• MGPB9215 B/N/P - Beretta 92FS 9mm 15rd - Adds 2 rounds
• MGPB9218AFC - Beretta 92FS 9mm 18rd - Adds 2 rounds
• MGPB9229AFC - Beretta 92FS 9mm 20rd - Does not add capacity
• MGPB9610 B/N - Beretta 96FS .40 10rd (dimpled) - Does not add capacity
• MGPB9613AFC - Beretta 96FS .40 13rd - Adds 2 rounds
• MGPB9615AFC - Beretta 96FS .40 15rd - Does not add capacity
• MGCZ7510B - CZ 75B 9mm 10rd (dimpled) - Does not add capacity
• MGCZ7517AFC - CZ 75B 9mm 17rd - Adds 2 rounds
• MGCZ7519AFC - CZ 75B 9mm 19rd - Does not add capacity
• MGCZ4010B - CZ 75B .40 10rd (dimpled) - Does not add capacity
• MGCZ4012AFC - CZ 75B .40 12rd - Adds 2 round
• MGCZ4014AFC - CZ 75B .40 14rd - Does not add capacity
• MGP22618AFC - Sig P226 9mm 18rd - Adds 2 rounds
• MGP22620AFC - Sig P226 9mm 20rd - Does not add capacity
• MGP2264013AFC - Sig P226 .40 13rd - Adds 2 rounds
• MGP2264015AFC - Sig P226 .40 15rd - Does not add capacity
• MGPT9210 B/N - Taurus PT92/99 9mm 10rd (dimpled) - Does not add capacity
• MGPT9215 B/N - Taurus PT92/99 9mm 15rd - Adds 2 rounds
• MGPT9218AFC - Tarurus PT92/99 9mm 18rd - Adds 2 rounds
• MGPT4010 B/N - Taurus PT100/101 .40 10rd (dimpled) - Does not add capacity
• MGPT4013AFC - Taurus PT100/101 .40 13rd - Adds 2 rounds
• MGPT4015AFC - Taurus PT100/101 .40 15rd - Does not add capacity
• MGWIT9SF10B - Witness Small Frame 9mm 10rd (dimpled) - Does not add capacity
• MGWIT9SFAFC - Witness Small Frame 9mm 17rd - Adds 2 rounds
• MGWIT40SF10B - Witness Small Frame .40 10rd (dimpled) - Does not add capacity
• MGWIT40SFAFC - Witness Small Frame .40 12rd - Adds 2 rounds

FEATURES Caliber .45

Capacity 6 Standard

Carbon Steel Tube, heat-treated for strength

Higher tensile music wire spring

Steel follower

Welded butt-plate

FEATURES Caliber 9 mm

Capacity 8 Standard

Carbon Steel Tube, heat-treated for strength

Higher tensile music wire spring

Steel follower

Welded butt-plate

The DAA 1911/2011 Ambidextrous Safeties with Shields are precision-made stainless-steel Safeties made with state-of-art Metal Injection Molding (MIM) technology. They are designed for use on any 2011 or 1911 pistol, with some minor fitting required. It is always recommended to have a competent Gun Smith fit safeties!

Take your Shadow 2 or Shadow 1 from great to OMG!  This will transform your S-2, delivering an ice crisp SA of 3 lbs. or less.   DA typically runs 6 lbs. or less using our famous HS-12000 (11.5#) hammer spring.   The disconnector will require minor fitting so you get the reset to a PERFECT 1 mm, which is not difficult to do with CGW tech support.  Turns the CZ lock work into a precision Swiss watch!  USPSA Production legal too!

1911

Now you can reload a 1911 Single Stack faster than you ever thought possible. The DP Ice Magwell dominates Action Shooting, and if you shoot a single stack, now you can find out why. The "Replaceable Ice Insert" is fast and forgiving. The super slick insert slides and glides the magazine right in, reducing missed reloads. Time is everything in Action Shooting and a blown reload can cost you a match, so why not have an advantage? The "Ice Advantage". Dawson Precision "KEY LOCKS" the 1911 ICE Magwell to our special checkered Mainspring Housing, both CNC machined to precision tolerances. Grip is solid and improved because of ergonomic design. Easy to install with tools and instructions included. Fits USPSA and IDPA boxes. Get them before the competition does. Available in Silver or Tactical Black. The profile is not too bulky and great for LE, carry or any shooter looking for a "SLICK as ICE" 1911 Single Stack reload. Fits USPSA and IDPA boxes. Legal for USPSA Single Stack Division!  Aluminum Mainspring Housing w/Magwell and Insert Weigh 1.5 oz. Wanna try the No-Gap Ice Magwell? It's as easy as changing the insert! The only difference between the Standard and No-Gap 1911 Ice magwell is the insert!

The Benefit to No Gap - In the past, 1911 magazines were stopped by a tang in front that rested against a relief in the front of the frame. Hey, it's worked for 100 years, but that required magwells to be open in front, to allow the mag to seat fully.
This made the front of the magwell not very forgiving during a speed reload. So we redesigned the whole system. This new insert fills the front gap with a super slick polymer that is "very" forgiving. Now you can have 360 degrees to funnel your 1911 mag into perfect position for consistent, blazing-fast reloads.  All great things come at a price so we had to design a 1911 mag and basepads that exceeded the limits of all conventional design. We took it to a whole 'nother level!

The new mags are DP reliable, of course, and have CNC machined aircraft aluminum base pads, not plastic. We built them to withstand a nuclear blast (although we haven't tested that yet).

MBX "Mini" PCC Competition 4" Extension Basepad with MBX Custom Spring

Adds Maximum capacity up to 47

For Factory Glock 9mm and ETS Magazines only.

Includes: - MBX 4" Mini Extension Basepad - MBX 24 Coil Custom Spring

Factory Glock extended slide stop lever with a larger surface area that allows the shooter to maintain a better grip when releasing the slide at increased speeds.

Does not work on gen 5 models.

Glock Extractor 9mm

 Brand Glock  Model: Gen.3 

Code PMPG3