Trigger sistem

CGW’s new CZ P-10 C short reset trigger. Drops in and produces a reduction in pre-travel.  The over-travel stop is built into the trigger body.

Shadow 2 Reach Reduction Kit with ultra-short reset now USPSA Production approved.  Cajun Gun Works’ famous RRK that permanently re-positions the trigger rearward with the hammer fully lowered an amazing 5 mm’s and reduces single action pre-travel dramatically.  Includes our “old style” stainless steel 85C trigger “Made in the USA”  with pre and over-travel screws so you can custom tune to your CZ.

This not only relocates the trigger, but it also doubles as an ultra-short reset for single action.  

Includes 2 different hammer pins (1 x HPIN and 1 x 75009) so you can be assured a secure attachment to either the factory hammer or Cajun Gun Works hammer.  Lifetime warranty to the original purchaser

Take your Shadow 2 or Shadow 1 from great to OMG!  This will transform your S-2, delivering an ice crisp SA of 3 lbs. or less.   DA typically runs 6 lbs. or less using our famous HS-12000 (11.5#) hammer spring.   The disconnector will require minor fitting so you get the reset to a PERFECT 1 mm, which is not difficult to do with CGW tech support.  Turns the CZ lock work into a precision Swiss watch!  USPSA Production legal too!

Bul 1911 modular trigger.

Trigger shoe B is included in the package.

NOTE

Other trigger shoes sold separately: https://cesar-shop.com/firearm...

Cajun Gun Work’s exclusive floating trigger pin.  Can easily be installed and removed an unlimited number of times in minutes!  Now made from heat treated S-7 tool steel and hardened to RC-50.  This pin is so durable, CGW guarantees it with a Lifetime warranty!   Includes installation slave pin.  Fits all metal framed 75 CZ’s, Shadow, SP-01, P-01, PCR, 97, RAMI, etc.  Does not fit Tactical Sport.

- R-edition Lightweight hammer 12835

-R-edition Disconector 12517

-R-edition Sear 12417

all parts are Fully Machined SS

Hammer -  Single Action  and  Double Action

HAMMER SA DA for models CZ 75, CZ 75 Compact, CZ 85, CZ 97, CZ SP-01 

The installation must be done by an experienced gunsmith.

New Shadow 2 ultra-short reset disconnector.   After extensive testing, we have engineered a new disco just for the Shadow 2.  This part will drop into most S-2’s and require no fitting, however, due to the timing variations from pistol to pistol, some very slight fitting may be needed on some S-2’s.

Kit consisting of

Floating trigger pin, Barrel bushing SP-01, Ultra lite set, Race hammer kit, Sear spacer, Trigger return spring, Hammer pin, Shadow 2 only disconnector. 

This trigger variant is slightly less rounded than the CZ 75, SP-01, SH2 trigger and is well suited for large hands. Fitting may be required on some CZ pistol models.

IDPA production legal, full upgrade kit. Includes everything for a 100% compliant competition ready drop-in package for all manual safety 75 series, 75B, 75B Compact, 40B, and SP-01, etc. NOTE: Recommended “Competition” and “Race” gun use only.Produces a 3# or less SA pull weight, not recommended for self-defense use. For all other applications, see our 75100 and 75110 upgrade kits. Absolutely No Substitutions.

Hammer for 1911 and 2011 models

Bul 2011 modular trigger. Trigger shoe A is included in the package.

Trigger for the 2011 pistol models

Modular trigger shoe 1911 and 2011 Bul modular trigger.

IDPA Production Legal upgrade kit for the manual safety CZ 75 models.  Fits all “classic” lock work manual safety 75 and 40B, including SP-01.  Everything you need excluding tools.  Our starter punch, part number SP is highly recommended.  Absolutely No Substitutions.

When looking to upgrade the performance of a 1911 pistol, a common improvement sought by shooters is a high-quality trigger job, with a crisp, clean break. Until now, a high-quality trigger job has never been in the realm of a “drop-in” upgrade. Nighthawk Custom has changed that with the introduction of our Drop-In Trigger System (DTS) for 1911 pistols. An all-in-one unit, the DTS replaces your existing hammer, hammer strut, sear, disconnector, and sear spring. Your existing sear pin and hammer pin will be retained for use with the DTS, but no other parts are necessary for installation

Straight single action aluminum trigger with pre-and over-travel adjustment.  All Cajun Gun Works supplied triggers include a 1.5mm allen wrench for your convenience.  This trigger is now a Cajun Gun Works product proudly “Made in the USA”!

TECH TIP:  This is a “conversion” trigger and completely disables the double action feature.  When installing this trigger you will need our TR-PIN as a replacement for the throw away CZ OEM trigger pin, and our SP starter punch for removing the CZ OEM trigger pin.  Remove the disconnector when installing this trigger.  This trigger cannot be used in any CZ decocker.

At the core of our PRO trigger is ZEV's new proprietary trigger bar and professional connector. These products deliver the crispest, cleanest trigger pull available. Finally, our new trigger pad features a revolutionary riveted assembly process that makes it the longest lasting and most reliable replacement trigger on the market.

Designed as a replacement part for BUL AXE pistols. Also can be used to lighten trigger pull in Glock Gen3 & Gen4 models. With this trigger  set you pul weight is reducet to around 3,5lbs

CZ P-09 Pistol Trigger pin, with recess.

Engineered to provide users with a consistent, positive reset and a reduction in trigger pull weight without sacrificing the reliability or safety of your pistol. Whether used in conjunction with a ZEV trigger or with your stock Glock trigger, the PRO connector will provide a noticeable increase in performance and is ready to drop-in and use straight from ZEV, no fitting or polishing required.

CGW’s Pro-Package for Shadow and 85C. Everything you need to transform your CZ to a smooth 6lb DA (Double Action) and crisp 3lb or less SA (Single Action).

Set of replacement pins for BUL AXE pistols. Fits Compact and FullSize models.

http://www.egwguns.com/1911-parts/hammer-strut-titanium/

The Zev Technologies© Competition Spring Kit contains a heavy trigger spring (heavier is better, as it assists with trigger pull), A reduced power firing pin spring, and a reduced power firing pin safety spring.

Bul 3.0lb connector for AXE models and Glock gen3.

The shape of the ultimate trigger was developed with help of biomechanical engineers and physician for the best possible ergonomics, performance and perfect functioning of your trigger with the CZ platform. The radius of the curve in the trigger is half way between the factory trigger and our flat trigger giving the best of both.

Eemann Tech Competition Disconnector for Tanfoglio Stock II, Tanfoglio Stock III.