€ $
Tax settings
select country
Select brand
 
Brand
Reset

ADVANCED SEARCH

Color
Price
Size
Reset

SPECIAL OFFER

Subcategories

Browse by category

New
Firearms
Firearm parts
Gear
Reloading & ammunition
Maintenance
Optics & Sights
Demo / Used items
Sale
Upper parts
Bolt small parts and recoil systems
Lower parts
Handguards, rails and mounts
Muzzle devices
Stocks and grips
Triggers and trigger parts
Gas blocks and tubes
Magazines and parts

AR15 and other rifle parts

Newest Items First
24 Per Page
HIPERFIRE HIPERTOUCH ELITE AR15 Trigger
€221.27  
HIPERFIRE HIPERTOUCH ELITE AR15 trigger.
In stock
+ −
KYNTEC KynSHOT RB5004 ''Shorty'' AR10 Cal .308 Hydraulic Buffer
€139.30  
The KynSHOT RB5004 “Shorty” Recoil Buffer is designed for AR-10 carbines with a collapsible stock and an AR-15 length (7.0") buffer tube which is common on many AR-10 applications. The RB5004 reduces felt recoil 20-30%, while largely eliminating muzzle flip. The improvement in weapon accuracy – specifically second and third shot accuracy – is even more noticeable as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier's rearward motion and to prevent bolt bounce as a new cartridge is chambered.
In stock
+ −
KYNTEC KynSHOT RB5000L AR15 300AAC Hydraulic Buffer
€139.30  
The KynSHOT RB5000L Hydraulic Recoil Buffer is optimized for use with light loads, including subsonic ammunition and .300 BLK. The RB5000L has seen heavy use with civilian competition shooters, law enforcement personnel, and the United Sates Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered. This model is made lighter and requires less force to cycle than the standard AR-15 KynSHOT Buffer. This is intended for soft cycling or under gassed guns that will not lock back on the last round with the standard carbine hydraulic buffer or heavier buffers. .300 BLK guns running exclusively supersonic ammo may be fine with a standard hydraulic buffer if the bolt cycles firmly and has proper ejection placement.
In stock
+ −
KYNTEC KynSHOT RB5000HP AR15 Hydraulic Buffer (also for 9mm CMMG Conversion)
€139.30  
The KynSHOT RB5000HP Recoil Buffer is designed for over gassed AR-15 carbines or "Thumpers" like the .50 Beowulf or .458 SOCOM. The RB5000HP is also designed for CMMG's 9mm radial delayed blowback system.  Please contact us to verify your application. Made using 17-4 stainless steel, the RB5000HP KynSHOT Recoil Buffer AR-15 is a proven system that has seen heavy use with civilian competition shooters, law enforcement personnel and the United States Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered. The RB5000HP KynSHOT Recoil Buffer reduces felt recoil by 20-30%, while largely eliminating muzzle flip.The improvement in weapon accuracy – specifically second and third shot accuracy- is large as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights.
Out of stock
HIPERFIRE X2S Mod3 Two-Stage AR Trigger
€237.66  
HIPERFIRE® is simply unmatched in performance and reliability. We have broken all of the standards in single-stage AR triggers with our HIPERTOUCH® family, and now we have done the same in our new X2S™ family of two-stage triggers. Whether you shoot competitively, train to defend yourself and...
In stock
+ −
HIPERFIRE X2S Mod1 Two-Stage AR Trigger
€221.27  
HIPERFIRE® is simply unmatched in performance and reliability. We have broken all of the standards in single-stage AR triggers with our HIPERTOUCH® family, and now we have done the same in our new X2S™ family of two-stage triggers. Whether you shoot competitively, train to defend yourself and your family, or you simply want to enjoy shooting out on the range, ensuring your rifle functions properly every time, without fail, is important. Our new two-stage triggers feature the same technology that HIPERFIRE has become known for. Radical Sear Mechanics™, Cam-Over Toggle Engine™, Soft Start Lock-Up™, Tactile Weightless Break™, user adjustable pull weights, mil-grade components, and precision manufacturing processes come together to make one of the most robust two-stage triggers available today. The MOD-1 design has a longer first stage than MOD-2 or MOD-3 for a more defined first stage prep, but shares the same curved bow and Maganese Phosphate coating as the MOD-2 design.
In stock
+ −
T-Arms AR15 Ambi Mag Release
€69.67  
In stock
+ −
T-Arms AR15 QD Back Plate Set
€36.89  
This set includes an AR15 backplate with a QD mount and a Castle nut for mounting your buffer tube.
In stock
+ −
T-Arms AR15 Mil-spec Upper Receiver
€184.43  
Mil-spec AR15 upper receiver with integrated bress deflector. Forward asist and ejection port cover are allready installed.
In stock
+ −
OUTERWILDE SS AR15/AR10 Gas Tube Black Nitride
€14.71  
Outerwild’s gas tubes are precisely machined from seamless stainless steel tubing and fit all standard AR-type gas systems.
In stock
+ −
Magpul AR-15/10 Heat-Treated Castle Nut
€9.80  

The Heat-Treated Castle Nut screws onto the AR15/M4 lower receiver extension (buffer tube) and keeps the receiver extension and lower receiver end plate secured in place.  The large notches allow for positive engagement with a castle nut wrench for proper installation and torque.  The smaller notches provide a location for the end user to stake the castle nut to prevent accidental loosening.

Finished in a Mil-spec manganese phosphate.

In stock
+ −
Magpul AR15/M4 Carbine Buffer H - H3
€69.63  
This Mil-Spec construction AR15 / M4 H3 Carbine Buffer is for use in AR15 / M4 carbine-type receiver extensions. It is constructed out of aluminum and contains three tungsten weights.
In stock
+ −
Magpul Enhanced Receiver Extension SR25/M110 - 10 Position
€98.32  

The Magpul Enhanced Receiver Extension is a 10-position, Mil-Spec sized, SR25 / M110 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.

Due to its longer length, this receiver extension is compatible with most DPMS® Gen 1 pattern 7.62x51 firearms with standard length AR15 / M4 carbine buffer components as well as aftermarket A5 buffers and springs for use on 5.56x45 AR15 / M4 platforms.*

Constructed of impact extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options.

Out of stock
Magpul Enhanced Receiver Extension AR15/M4 - 7 Position
€81.93  

The Magpul Enhanced Receiver Extension is a 7-position, Mil-Spec sized, AR15 / M4 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.

Constructed of impact-extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options while retaining a standard length for the tube.

In stock
+ −
Magpul AFG - Angled Fore Grip
€39.30  
Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.
In stock
+ −
ODIN XMR 3 Extended Magazine Release
€24.55  
Inspired by the ODIN Works O2 Lite, the XMR3 is the latest mag release available from ODIN Works. Machined from billet 6061 aluminum and designed to work with KNS pins and the BAD lever. The XMR3 has the largest profile yet, making it easily accessible by all shapes and sizes of hands and fingers. Works with both AR15 and some AR10 lower receivers. For Aero M5 Lowers purchase the AR10 Add on button.
In stock
+ −
ODIN AR15 O2 LITE Handguard 9.5'' | 12.5'' | 15.5''
€196.68  
The O2 Lite is the latest and lightest of all the ODIN Works Forends. Precision machined from 6005-T651, the O2 Lite is a full 20% lighter than its predecessors. All ODIN Works Forends are free floating for accuracy and hard anodized for durability.
In stock
+ −
ODIN AR15 Zulu 2.0 Adjustable Stock Kit
€163.89  
The ZULU 2.0 stock combined with the ODIN Works padded intermediate buffer tube creates a complete stock suitable for rifle or carbine builds. Machined from 6061 aluminum with ergonomics and function in mind, the ZULU2.0 stock gives you an ambidextrous and adjustable solution for your rifle. With the reversible QD adapter included, this stock allows you to set it to your needs.
Out of stock
SPRINCO AR Buffer Spring RED
€22.91  
Extra Power Buffer Spring. This was our first AR buffer spring solution that we were tasked to design back in 2006 for a Force Modernization Team to specifically address spring-related M4 carbine reliability function issues for operating challenges in the Eastern Asia Theatre. The design loads of the Red spring are approximately 25% greater than the White spring for one of the considered Load Constants in the spring design. Refer to provided tuning procedure reference documents prior to calling for recommendations for use. The Red spring is commonly used in 9mm, 6.8 SPC, 6.5 Grendel, .450 BM, .450 SOCOM, .500 Beowulf, and Colt LE6920’s specimen carbines, but certain specimen guns can deviate from the norm depending upon port values and the power factor of your chosen ammunition loads. Color Coded RED.
Out of stock
SPRINCO AR Buffer Spring BLUE
€22.91  
Enhanced Power Buffer Spring. The design loads of the Blue spring are approximately 15% greater than the White spring for one of the considered Load Constants in the spring design. Refer to provided tuning procedure reference documents prior to calling for recommendations. While contemporary internet forum lore leans towards the use of the Blue spring with an H2 or ST-T2 buffer for 14.5 - 16” ML carbines, nothing is set in stone due to the vast range of gas port values in the wild that have come into play since we first entered the arena. Color Coded BLUE.
Out of stock
SPRINCO AR Buffer Spring YELLOW
€22.91  
Reduced Power Buffer Spring. We collaborated with two prominent commercial ammunition manufacturers and two prominent gunsmiths to arrive at the design for the Yellow spring. It’s approximately 20% lighter than the White spring, and was the consensus choice out of 4 different evaluation samples provided to all parties. They all added in their final evaluations that if a particular gun needed a lighter spring, that the gas port should be enlarged for overall reliability. The Yellow spring is also appropriate for with low power SRTA training or SIMS Rounds for training operations. Color coded YELLOW.
Out of stock
SPRINCO AR Buffer Spring ORANGE
€22.91  
Extra Extra Power Buffer Spring. The Orange spring is much stouter than the Red spring. The Orange buffer spring was originally engineered for the demands presented by.308 / 6.5 CM / .260 Rem, etc., heavy BCG carbine DPMS Pattern applications using standard 7" Depth M4 extension tubes and short 2.5" buffers (Including aftermarket "heavy buffers") in robustly gassed 16” - 18” ML gas carbine platforms, but has been proven to be a requirement for tuning over gassed carbines of any equivalent heavy calibers in AR-10 pattern tubes with 3.25" buffers or lesser calibers (5.56, etc.). Color Coded ORANGE.
In stock
+ −
S&W M&P15-22 Ejector
€27.01  
Smith & Wesson M&P15-22 Ejector. This ejector is manufactured for the Smith & Wesson M&P15-22 blowback-operated rifles chambered in .22 LR. This ejector is made from durable black steel and is responsible for ejecting spent casings from the firearm. This part is perfect as a spare on the workbench or as an immediate replacement for a lost or damaged piece.
In stock
+ −
S&W M&P15-22 Firing Pin Spring
€12.30  
Smith & Wesson M&P15-22 Firing Pin Spring. This firing pin spring is manufactured for the Smith & Wesson M&P15-22 blowback-operated rifles chambered in .22 LR. This spring is responsible for returning the firing pin to position after the rifle has been fired. This steel...
In stock
+ −
1 2 3 4 5 6 7 8
2 - 12