Handguards, rails and mounts

The Competition handguard is 100% made CNC machined in Italy. It was designed specifically for sports activities; for this purpose it has been heavily lightened, front side rails are removed which optimizes its grip and allow the regulation ADC gas block from the outside.

The Elite handguard is 100% made in Italy, CNC machined, it was designed primarily to maximize the particular design that features the ADC carbines, allowing compatibility with other AR platforms.

Competition handguard

The Competition handguard is 100% made in Italy, CNC machined, it was designed specifically for sports activities; for this purpose it has been heavily lightened by making millings which optimize its grip and allow the regulation of our gas block ADJ. from the outside.

Round, free-float profile, it has double barrel nut, both inside and outside.

The holes positioned throughout its length allow mounting from outside the picatinny sections every 22.5 °.

Material: 6082 aluminum, hard black anodizing

Available lengths: 15,5”

Weight (without barrel nut): 208 gr

Width: 50 mm

Inside Diameter: 35mm

The M5 Plus handguard is 100% made in Italy, CNC machined, it was designed primarily to maximize the particular design that features the ADC carbines, allowing compatibility with other AR platforms. It is characterized by a free-float design an octagonal profile with full size picatinny. It uses the M-LOK system for attaching further accessories.

The M5 Plus handguard is 100% made in Italy, CNC machined, it was designed primarily to maximize the particular design that features the ADC carbines, allowing compatibility with other AR platforms. It is characterized by a free-float design an octagonal profile with full size picatinny. It uses the M-LOK system for attaching further accessories.

Picatinny rail for ADC handguards.

BT15: 3.35" 1913 Rail

The BT15 - 3.35" 1913 Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces. A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE IS INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Available in black only.

BT12-QK: Standard Height Accu-Shot® Precision Rail Monopod

The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. Available in black only.

Elevation Range: 3.75 – 4.65”

Folded Length: 3.85" approximate

Weight: 7.4 ounces

The SMR MK4 and MK8 were one of the first RIS sistems feature M-LOK technology. Available in multiple lenghts, with fore rails (MK4) or completly modular (MK8). Thez also feature Geissele's proprietary 2.25" long barrel nut. This increases the surface contact where the rail interfaces with the receiver and creates a platform that can be trusted to be straight and true the entire length of the free float rail. This increases accuracy and zero repeatability during disassembly and reassembly when performing maintenance.

Nordic Components, Purpose-Designed for Mounting Accessories at the 11 O’clock or 1 O’clock Positions On the NCT3 Handguard, This Rail Has Additional Height to Allow Clearance From the Integral Top Rail, Designed For Use with All M-LOK Compatible Handguards, M-LOK Aluminum Rail Sections Allow the Attachment of Various 1913 Picatinny-Spec Rail-Mounted Accessories. Machined From Milspec-Anodized Aluminum, M-LOK Rail Sections Feature Beveled Ends to Reduce Snagging and Eliminate Sharp Corners

The Magpul M-LOK Bipod Mount allows for the attachment of most Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market.  By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability.

Designed for use with all M-LOK compatible hand guards and forends, our 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

Magpul M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. 

The M-LOK T-Nut Replacement Set is a replacement hardware pack designed for use with all M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses.

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). This pack of six M-LOK covers is non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL and SGA forends, and may not be compatible with free-float hand guards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock in.

Nordic Component M-Lok accessories were designed for use with all M-LOK compatible handguards. M-LOK aluminum rail/QD sections allow the attachment of various mounted accessories. All hardware necessary for attachment directly to M-LOK slots is included