Select brand

Daniel Defense DDM4v7 SLW 14.5" Cal. .223/5.56mm

2,376.23

Purchase under special conditions

This product can be sold only under special conditions. To read more, follow the link purchase of firearms.

NOTE: purchase of firearms has to be made separately from other products.

Short description:
The DDM4 V7 SLW AR15 style rifle is one of the lightest, fastest-handling rifles available in the DDM4 line-up, tipping the scales at under 6 lbs. Built around a Cold Hammer Forged, 14.5 inch Lightweight profile barrel, the V7 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16 inch minimum barrel length.
02-128-15049-047
In stock
+

The DDM4 V7 SLW AR15 style rifle is one of the lightest, fastest-handling rifles available in the DDM4 line-up, tipping the scales at under 6 lbs. Built around a Cold Hammer Forged, 14.5 inch Lightweight profile barrel, the V7 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16 inch minimum barrel length.

The mid-length gas system provides smooth and reliable cycling under any conditions and reduces both perceived recoil and wear on moving parts. A free-floating MFR 13.5 M-LOK handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 SLW has plenty of room for the sights, optics, and accessories the operator may require. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip.

____________________

MATERIALS & CONSTRUCTION

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of  7075-T6 Aluminum
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5"" Lightweight Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
  • GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
  • MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • SIGHTS: Sold Separately
  • HANDGUARD: Daniel Defense MFR 13.5"", CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized
  • CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
  • RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum
  • BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • Made in the USA!

____________________

FEATURES:

  • Mounting System: M-LOK
  • Caliber: 5.56mm NATO
  • Muzzle Thread: 1 ⁄ 2 × 28 TPI (Threads Per Inch)
  • Gas System: Mid-length
  • Barrel Length: 14.5
  • Barrel Profile: Lightweight
  • Product Weight: 5.9
  • Length: 31 1/2” – 34 ¾”
  • Magazine: DD Magazine
  • Case: Daniel Defense Full-Latch Impact Plastic Case
  • Manufacturer: Daniel Defense

You may also buy real firearms here on our website, but you need to meet few requirements.

First of all, you have to have a firearms license. We need your buying permit of desired firearm. This means you have to go to your Administration Office (like you always go when you want to buy a new firearm) and apply for a buying permit. Since you will not buy a firearm in your country but in other country, you have to ask for a EU Buying Permit. We are going to need a scan of this EU Buying Permit (with your ID or firearms license) and later also the original (you have to send it by regular post). Aditionaly we need you to fill and sign the Authorization Letter which you can find here. Please send a scan of filled Authorization letter, so we check it. Once we confirm your EU Buying Permit and Authorization Letter we are going to ask you to send the originals by post to our address.

Once we get them, we will apply for Slovenian Buying Permit in your name. Fee for permit is 80,00 EUR and 40.00 EUR for ammo buying permit.

When we get Slovenian Buying Permit, we will send you the firearm.

 To sum things up, we need:

  1. scan of your Firearms License or ID
  2. scan of your EU Buying Permit and later the original
  3. scan of Authorization Letter and later the original

 If law in your country does not require you to apply for Buying Permit, we need you to fill just the Authorization Letter and send it to us with your ID.

Please read the instructions below in your language, about the purchase process.

HR, SR: Stranci

Proces nabave oružja (streliva, baruta i kapisla) u Republici Sloveniji izvodi se na slijedeči način:

  • Prvo morate da stupite u kontakt sa prodavačem i provjerite da li je oružje na zalihi,
  • Na rezervaciju vam se daje određeno oružje, sa kojega vam treba serijski broj i model oružja,
  • Stupate u kontakt sa vašim MUP RH, gdje na osnovu nabavne dozvole, tražite uvoznu dozvolu, "PRETHODNA SUGLASNOST ZA UNOS ORUŽJA ILI STRELIVA U RH" (Obrazac 2a):  na tom obrazcu moraju biti navedeni podaci o oružju
  • Dogovorite se sa prodavačem  - kada bi došli u Sloveniju, da vam se najavi termin na našoj "UPRAVNI ENOTI", tamo se izdaju potrebni papiri za kupnju oružja na osnovi hrvatske nabavne dozvole i prethodne suglasnosti. Taj postupak traje oko 2 sata i plača se taksa u eurima, navodi se granični prijelaz.
  • Poslije pridobljene dozvole za nabavu oružja u Sloveniji, dolazite u trgovinu, gdje vršite kupovinu vašega oružja
  • Scan your gun license and passport / personal ID card
  • Contact us with the products and quantities you want to get
  • We will contact you and provide all the informations you will need
  • With this you can acquire a license for the import of weapons, ammunition, gunpowder or primers from a competent department
  • Scannen Sie Ihre Waffenschein und Reisepass / Personalausweis
  • Kontaktieren Sie uns wegen Produkten und Mengen Sie erhalten möchten
  • Wir kontaktieren Sie zurück mit allen Informationen die Sie benötigen
  • Mit dieser infrmationen erwerben Sie eine Lizenz für die Einfuhr von Waffen, Munition, Schießpulver oder Zündhütchen von Ihrer zuständigen Stelle

Postupak nabave streliva, baruta i kapisli je isti: potrebni su vam isti dokumenti,  koje posjedujete za kupnju u Hrvatskoj i na osnovu tih idete na Upravnu jedinicu kod nas, gdje vam naprave nabavne dozvole za Sloveniju. Te dozvole traju 6 mjeseci i ograničene su na neku količinu,  koju nije potrebno iskoristiti sve odjednom, tako da možete kupovati postepeno:  u roku od 6 mjeseci. Oružje i strijelivo se može slati poštom, kapisle i barut je zabranjeno.

EN: Foreigners

If you interested in the purchase of weapons, ammunition, gunpowder or primers please follow the next instructions:

  • Scan your gun license and passport / personal ID card
  • Contact us with the products and quantities you want to get
  • We will contact you and provide all the informations you will need
  • With this you can acquire a license for the import of weapons, ammunition, gunpowder or primers from a competent department

Based on your documents we will acquire an export license for the products you wish to get.

The permit is issued to us with a duration of 6 months, in this time you have all the time to get what you want.

DE: Ausländer

Wenn Sie sich für den Kauf von Waffen, Munition, Schiesspulver oder Zündhütchen interesieren bitte folgen Sie die nachste instruktionen

  • Scannen Sie Ihre Waffenschein und Reisepass / Personalausweis
  • Kontaktieren Sie uns wegen Produkten und Mengen Sie erhalten möchten
  • Wir kontaktieren Sie zurück mit allen Informationen die Sie benötigen
  • Mit dieser infrmationen erwerben Sie eine Lizenz für die Einfuhr von Waffen, Munition, Schießpulver oder Zündhütchen von Ihrer zuständigen Stelle

Auf der Basis Ihrer Unterlagen werden wir eine Exportlizenz für die Produkte, die Sie erhalten möchten, erwerben.

Die Genehmigung für Export hat einer Laufzeit von 6 Monaten, die es Ihnen ermöglicht, sukzessive kaufen unsere Produkte im Geschäft durchzuführen, bis Sie angegebene Menge in Lizenz voll nutzen.