Gear

Rangecart Pro - the ultimate IPSC range cart.

If you have ever attended a match on a really large, spread-out range, you will appreciate how handy and helpful a cart can be. We shooters do tend to lug around a lot of gear and ammo to a big match.

Our new RangeCart Pro is designed from the ground up with the practical shooter in mind. It is designed to be the perfect support product for our RangePack Pro backpack, but can be used equally successfully with almost any range bag.

Made of rugged, top quality aluminum tubes and steel joints and hinges, this range cart can securely carry over 50 kg of gear. And with its wide inflatable all-terrain tires, it can carry that weight anywhere you need to go!

Quick release assembly pins allow you to fold the cart down in seconds, making it possible to pack into any moderately sized suitcase or even the smallest car trunk. You need never leave it behind.

The cart incorporates a clever umbrella holding system, designed to secure a folded or an open umbrella and hold it firmly in place.

The D1000 fabric backing is as functional as it is attractive. On the front top end, positioned high for easy access while standing, is a fold-out ammo shelf, on which you can place 100 rounds of ammo and load your magazines comfortably. A great feature for those ranges without tables! Beside this fold-out tray are a couple of extra magazine pockets, for added convenience.

Built into the back below the rubberized handle is a generous-sized, heat insulated “lunch box” compartment, the perfect place for your fruit, sandwiches and snacks you want with you out on the range. Below that are two large water bottle holders, easily storing 1 L bottles.

Weight: 3.5 kg Wheel Base: 42 cm Handle Height: 113 cm

Note: Umbrella and Backpack not included.

CED/DAA 8- Pack Deluxe Zippered Magazine Storage Case

The DAA Deluxe Magazine Pack provides safe and protective housing for 8 of your valuable competition magazines. We spend hundreds of Euros on our magazines, and this pouch finally provides a carrying and storing means worthy of their value.

The pouch is large enough to accommodate up to 170 mm long magazines, and its elastic straps adjust to hold any double-stack magazine securely, from the smaller CZ style mags to the larger 2011 magazines used by so many in our sport. Single stack shooters will find that they can insert 2 magazines into each loop, providing place for up to 16 single stack mags.

The DAA Deluxe Magazine Pack is constructed from sturdy, double-layered 600D polyester, with inner foam lining and a striking red interior. A top quality heavy-duty zipper ensures years of reliable service. The convenient steel D-loop provides an attachment point, should you wish to hang the pouch on a larger bag.

DAA Replacement Foam Inserts (2pcs) of precut replacement foam pads for most earmuffs. Tested to be a perfect fit in Sordins and Peltor models, these should work equally well in pretty much any ear protection earmuffs.

Replace those old dirty, smelly foam pieces with a new fresh set at minimum cost. These foam inserts are pocketed on the back side to allow space for speaker units as used in electronic sets. The dense foam offers excellent sound damping and the black colored surface treatment increases durability of the foam pads.

A new and practical option for charging your CED7000 shot timer. This custom made USB charge cable enables you to charge your CED7000 from any USB power outlet, from you computer, in your car, or any compatible USB mains power adaptor.

Note: Pictures shows CED7000 timer, which is NOT included with the charge cable.

The Alpha-X holster by Double-Alpha has taken the shooting world by storm, fast becoming the choice of top shooters worldwide. And while the reviews and feedback have been overwhelmingly positive, we have had a few requests for a Thigh Pad option to be made available for this holster.

* This is a blank Alpha-X holster aseembly only. If you require it with an insert, go the to full holster product page.

Cut wind interference on 3M™ Peltor™ Cup Microphones with this pair of foam windsocks.  - Also helps extend the life of your microphone. Works with a wide variety of 3M™ Peltor™ Communications Headset products.

Laser cut plastic logo inlays for the Alpha-X holster body and hanger. These inlays have 3M tape on their back for easy installation on the holster assembly.

Due to popular demand we are now pleased to offer you the DAA Super-Strong magnets, sold separately, for mounting on the DAA Alpha-X / Race Master pouches, or any other type of base you care to use them on.

These Zinc plated magnets are incredibly strong, offering approx. 87kg of pull strength. With these magnets, you can slap on that magazine quickly and confidently and know that it will not fall off as you move. The magnets measure almost 50mm in diameter, and are 12mm thick (with their casing).

Fitting to an Alpha-X / Race Master Pouch:
In the front of the pouch there is a 4.2mm hole, which can be used to attach the magnet to the pouch body. You will need to tap (thread) this hole using an M5 Tap. Do it carefully and slowly as the thread needs to be precise, as there is only a 2.5mm side wall to work with. once done, simply screw the magnet directly onto the front of your leading pouch. We suggest using a little LockTite on it, to keep the screw from opening.

Do not worry if the tip of the screw protrudes slightly into the pouch body - the magazine does not reach down far enough to hit it.

The CED Carbon Fiber EVA Pistol Case combines all the great features desired in an EVA a case.  A hard, protective and cool looking shell. Zippered and lockable with a TSA approved combination lock making it ideal for air travel. A handle for easy carry, and dense eggshell foam for complete protection of your valuable pistol.  Will fit one open class or two production pistols. 

How to set your private combination:

1. Make sure the lock is unlocked – default code is 0,0,0
2. Use a toothpick or pen to press down on the small button located on the top of the lock to the right of the locking tabs. A small click sound can be heard.
3. Rotate the dials to your chosen code. A clicking sound will accompany the rotation of the dials
4. Slide the unlocking lever left to set your combination and exit the setting mode. Your new code is now set.
5. You must have the correct code entered in order to use the above mentioned resetting button. Don’t forget your code!

Available in Black Carbon Fiber finish only. 

Dimensions: 32cm x 21cm x 8.5cm (12.8” x 8.4” x 3.4”)

Dry-firing is one of the most effective methods to improve you shooting skills. It is cheap – no ammo is required. It is convenient – you can do it in the comfort of your home (don’t let the neighbors see you…). And it is an excellent way to build subconscious skills without the distractions creates by target feedback – good or bad hits. But in order to make your dry-fire practice as productive as possible, it needs to be as realistic as possible. You need to use YOUR gear, your holster and gun, and you need to make sure that you do GOOD practice only. Which means pulling the trigger only when the sight picture is correct!

- IPSC: This DAA Dry-Fire Target Set consists of 20(!) precisely scaled down IPSC Classic targets. When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at distances of 15, 20 and 30 meters.

- USPSA: This DAA Dry-Fire Target Set consists of 17(!) precisely scaled down USPSA Metric targets. When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at distances of 15, 20 and 30 meters.

Many shooters have to wear their hearing protectors for a long time. The range of hearing protectors help ensure you’ll have no problems staying focused. The low, two-point fasteners allow an even distribution of pressure over the whole cushion area, to help ensure the ear muff stays in place even during sudden head movements or positioning the weapon. This feature also helps ensure a snug fit without compromising comfort and protection for high quality sound reproduction.

Many PCC shooters use extended Glock Magazines, often with long base pads added for even more capacity.

To ensure the best possible retention in our Racer and Race Master mag pouches, we are pleased to offer this dedicated extended Glock Side spacer.

Simply assemble this spacer instead of your short one, and allow the bottom of your long mag to extend out the bottom of the pouch body, for a more balanced more secure retention.

The long spacer offers three hole positions in which to place the stopper, giving you the ability to experiment and decide for yourself what the best depth for your magazine is.

NOTE:  this spacer is not compatible with the Alpha-X line of pouches. Magazine and Magazine Pouch not inlucded!

The DAA Deluxe Magnetic Pouch utilizes two powerful 32mm magnets to hold the magazine securely in place while providing a smoother release than that achieved from the larger standard Magnetic Pouch. The support side walls allow us to use smaller magnets which in turn make the pouches more useable as an all-round pouch for every day use, and not just as a designated pick-up Pouch.

For those shooters who like the simplicity and minimalist look of an open magnetic pouch - this is the perfect choice! The slim body make it possible to position pouches closer together while still leaving enough room to reach down and grab the magazine correctly. The lack of external or front pouch walls allow the pouches to be spaced that much closer together. Perfect for Standard or Production where one must wear the pouches behind the hip bone.

The pouch is attached to our new model belt hanger, which locks securely on any 1.5" belt, clamping down to hold tightly even on thinner belts. The pouch can be swivelled around the centre screw (lower magnet's middle) to angle the pouch as designed. The off-centre mounting point on the hanger offers the option of two heights to choose from. The pouch body is machined from solid Delrin and so is tough and durable. Available in Black only.

Available for Right-Hand users only.

Some shooters prefer to have a muzzle support on their competition holster. This is an indisputable fact.

While most users will find that the Race Master holster functions perfectly without the additional muzzle support, there are some added advantages to using this extension: The muzzle support prevents the gun from being dislodged upwards, which could happen if bumped on the shooters thigh, or against a prop, during a walkthrough. If the holster was left unlocked, the gun can be dislodged. The muzzle support prevents this from happening.

The Wide 2" Belt Hanger for Alpha-X Pouches, is a complete fully-assembled belt hanger for the Alpha-X pouches – enabling the user to attach these pouches to a wider belt. The wide bracket and included spacers will accommodate up to a 2” wide belt, and the two ¼” spacers make it easy to use on a 1.75” belt or a 1.5” belt as well.

The hanger is complete, including the steel bracket on the back with the two removeable spacers, and the ball joint for attachment to the Alpha-X pouch body.

Pouch body and pouch-spacers are not included.

Making the best even better!

The replacement Silicon Gel Kits, include 2 Silicon ear Pads and 2 new insulation cushions. It is important to replace the cushions from time to time, to ensure good hygiene and best sound performance. This upgrade kit gives you extra cushions, in addition to the main item - the new silicon Gel Pads.

You need to try these to best appreciate them. The silicon in the pads is in a gel state, not liquid, so even if punctured it will not leak. The Silicon molds itself around the contour of your head, offering even more comfort and better sound protection that the normal sponge based ear pads.


The Silicon Gel pads really shine when you use the ear protection with shooting glasses, as we usually do. They mold themselves around the arms of the glasses, improving sound protection and preventing pressure of the glasses against your head.

The Sordin Silicon Gel Ear pads can be used with all the Sordin models offered here - the Supreme Pro, Pro-X and Pro+3. The original pads are easily replaced, and can be kept as spares for future use. No modification is needed to the ear defenders when using this silicon gel upgrade kit.

Lets you hear what you need to hear. Protects you from what you don't. 

Enter the ZemZone where loud damaging noise is suppressed yet you can hear the conversation of others around you. You will improve your concentration, be more productive and feel better at the end of the day. The ZemZone. It's the safe sound world for your ears.  A quiet revolution at work, at play, at home Improved Performance 

• High noise reduction across all frequencies
• No distortion of sound
• Blocks harmful noise but allows speech and other useful sounds to be heard

Greater Comfort

• Lightweight (less than 2 ounces)
• Adjustable head band
• Comfortable for extended use

Increased Safety

• High speech intelligibility
• Hear shouts or warning signals
• No need to remove hearing protection to have a conversation

Convenient

• Folds for easy storage in shirt pocket      or
• Drop around the neck while not in use

DAA IPSC Scoring Overlay Gauge is made of sturdy 0.75mm thick hard transparent plastic, these overlay gauges are a “must have item” in every range bag! 
They are the size of standard credit cards and so fit easily into any wallet or pocket. 
Include precisely drawn caliber circles and a handy 50mm side ruler for measuring gear’s distance from the body.

As most serious IPSC and USPSA pistol shooters know, preventing slip in your grip is of utmost important for high-speed accurate shooting. A grip-enhancement lotion is one of the best ways to achieve that anti-slip, without the need to apply excessive force to the grip. Especially in wet conditions or in extreme heat, sweating palms can really hurt your performance. But with a few drops of the new GRIPZ by DAA, applied just before you shoot, your palms remain dry and your grip secure.

GRIPZ by DAA is a grip enhancer designed by shooters for Shooters. Supplied in a plastic bottle with a practical “Snap-cap” type closure, that ensures a good seal and quick, easy, one-handed access when needed. GRIPZ by Double Alpha does not dry as white in color as other competing products, and will not rub off as easily onto your clothing and pistol grip. It will be cleaner to use than other leading grip-enhancers popular in our sport.

GRIPZ is silica based grip-lotion, diluted with alcohol and stabilizers for the ultimate performance and longevity. Each bottle holds 75ml (some 20% more than competing products).

Dillon's NEW Concealed Carry Tote accommodates all the tools you need to survive the urban jungle. This low-profile carry case looks like an ordinary briefcase or laptop case, but it's designed for your handgun as well as your PC! It's made of rugged nylon fabric, with heavy-duty zippers on all compartments. The main compartment is 15" x 11.5" x 3" deep, with pouches in back and front. The hidden gun pocket is held closed with hook & loop fasteners for quick access, has a 14.5" opening and is 10.5" deep.  The front pockets are 6.5" x 8" x 1.5" and feature inner pockets for flat items. There is also a zippered compartment on the back of the case sized to accommodate a ballistic armor plate. 

The LULA loader & unloader is a military quality personal magazine loader and unloader. It facilitates both loading of loose rounds into a magazine and unloading them out of the magazine. It does so quickly, safely and comfortably. Usable for tens-of-thousands rounds.  

Advantages: Both Loads AND Unloads FAST! 35sec to load 30 rd, 5sec unloading 30 rd. Safe on fingers and magazine,  absolutely no sore thumb! Pocket size, just drop on in your range bag! Durable, made of the best quality glass-reinforced polymer Weights approx. 38grams (1.3ounce) Constructed of only two parts ISO9002 manufacturing Chemicals resistant

Other advantages: A huge time saver when several magazines need to be cleaned (unloaded and reloaded). Needs no dexterity or training to use, suites right and left handed users Needs no maintenance at all. Useable also in zero light environment. Useable with gloves in freezing weather. Loading 1. "Click" the LULA loader over the open end of the magazine; 2. Have the LULA loader and magazine face upwards; and 3. Move the lever to-and-fro as you feed rounds into the magazine.

Unloading 1. "Click" the LULA loader over the open end of the magazine; 2. Have the LULA loader and magazine face downwards; and 3. Move the lever to-and-fro as the rounds expel out of the magazine.

That's it !

This new exciting product from Maglula is the most compact and versatile AR15 loader ever introduced. The StripLula will fit all plastic and metal AR15 magazines, clip onto the top lips and allow you to quickly and effortlessly load your mags.

It can be used to load ammo packed in stripper clips (12 seconds to load 30 rounds) or it can be used to load individual rounds(40 seconds to load 30 rounds).

It can even be used as a simply unloader, allowing the unloading of a 30 round magazine in 15 seconds flat.

If you shoot an AR15 – you’ve to have one of these!

The BabyUpLULA loader is a military quality personal pistol magazine loader for 0.22 to .380 caliber rounds. It is a radical new design, which allows for easy and smooth loading of practically ALL single and double stack pistol magazines in these small calibers (for larger calibers use the UPLULA).

While loading you can support the base of the magazine on your body/thigh or on a table when available.

Features:
- Loads all .22-.380 caliber magazines- No inserts, spacers or adjustments at all! One size fits all.
- Easy and quick loading; Rounds just drop in with no fingers pushing or forcing the rounds.
- Up to one round per sec. loading rate, with some practice.
- Fits in your hand and pocket, weighs only 50 grams.
- Highly durable - constructed of the best reinforced polymer.
- No more strain or pain when loading those mags!
- Load hundreds of rounds, easily.

Does not load the following:
Converted .22 mags. .22L
Kimber .22 .22LR
S&W 22A/22S .22LR
Beretta U22 NEOS .22LR
Walther P22 .22LR
Browning .380 BDA .380
Beretta 84 .380 .380
Beretta 81 .32 .32
Tuaras PT380 .380
Colt ACE .22LR
GSG 1911 .22LR
Ruger SR22 .22LR

The Range BenchLoader™ loaders is a heavy-duty industrial 5.56 / .223 cal magazine loaders made to load a magazine in a single hand stroke. It is intended for daily loading of hundreds of magazines at shooting ranges and armories. It totally eliminates fingers pain and injury, shorten loading time, and keep the magazines lips intact.

Loads all AR15 / M4 compatible 5.56 / .223 magazines, like:
- M16 / AR15 / M4 USGI (NATO STANAG 4179)
- Magpul PMAG
- SCAR 16
- H&K metal 416 / SA80
- SureFire 60 & 100 rd
- Beretta AR 70-90
- Lancer *
- and all others

The 22UpLULA™ loader & unloader is made for loading .22LR wide body mags. 1/2”, like .22LR 1911 mags and other .22LR converted mags. It has the body width of our UpLULA™and has a narrower metal beak designed for .22LR rounds.

(It will not load .380 to .45 cal. mags. !)

Master lock secures the machine cover in place, preventing "unauthorized fingers" from playing with your machine

A set of two loaders for loading .22LR cal. single-stack narrow mags with a projecting side-button, such as:

• Ruger MK I, II, III, 22/45
• Browning BuckMark
• Beretta U22 NEOS
• COLT Woodsman/Cadet
• High-Standard .22
• S&W 22A/22S (only X10-LULA™ will load well)

A set of two loaders for loading .22LR cal. single-stack wider mags with a projecting side-button, such as:

• Walther P22 / G22 / PPQ
• Ruger SR22
• *COLT 1911 .22
• S&W M&P .22 compact
• *S&W M&P .22 10rd & 12rd
• Walther PPK/S .22 (only the T12-LULA™)

Tension adjustment & slick insert material ensures, fastest mag changes, angle & height adjustment. This Pouch is fully Ambidextrous giving Left & Right handed shooters the same benefits. Supplied with Inserts.

The DAA Single Stack Magnetic Pouch is our latest magnetic pouch design, offering an ultra-compact and ultra-efficient magazine holding system for single stack shooters.

It positions the magazine only in the 90 deg “away from the body position” and is an excellent option for shooters who choose to carry their magazines this way, as many single stack shooters do.

The DAA Single Stack Magnetic Pouch utilizes two small yet powerful magnets that hold the magazine firmly in place while allowing it to rest inside its supporting track. The track guides the magazine in and out of the pouch and prevents it from accidentally being dislodged. The release achieved from this magnetic pouch is the smoothest of any of our magnetic pouches, partly due to the smaller contact area with the single stack magazines.

The belt hanger is the same as that used in the Racer pouches - the same minimalist steel plate design which eliminates separation between your inner and outer belt. The pouch can be adjusted for tilt in very small steps, allowing you to find your preferred angle. Once the correct angle is set and the center screw tightened, the serrations in the connector piece lock up, preventing any possibility of the pouch rotating until the center screw is loosened several turns.

Most AR-15 mag pouches have their roots in tactical or military applications. Not this one! DAA set out to create a totally new competition orientated pouch for the AR-15, and we are very proud of the result, the DAA AR-15 Racer Pouch!

>span class="s1">Supplied as standard with our Alpha Rail System, the pouch can be adjusted for tilt or exchanged for a pistol pouch or shotshell holder.

Adjusting for various shell lengths can be done on the fly, without removing your rig, and without any tools. Simply turn the large tension wheel and the upper support slides up and down the rail to match your shell length.

Colored laser-cut insert plates decorate the upper and lower supports and are available in several colors.

Building on the success of the Magnetic Single Stack Pouch, we are pleased to offer the same configuration in two new models, a 2011 wide body and a CZ/TAN double-stack magazine size.

(Note that the wider CZ TS mags should select the 2011 model!)

Two 20 mm-round magnets hold the magazine firmly inside the  pouch track, allowing for secure retention and yet enabling a smooth and effective magazine release. The base on the pouch is the same as used in the Racer line, providing for two height positions and a step rotation adjustment. The thin steel plate at the back of the belt-hanger minimizes separation between the inner and outer belt. Perfect for these pouches, which are often mounted close together on the outer shooting belt. This pouch configuration is ideal when wanting to mount pouches close together and allow easy access to multiple magazines without having to reach too far back.

Available in Black only.

The unique retention system that all DAA pouches utilize has made the Racer Pouch a very popular choice for competition shooters worldwide. However, to make it suitable for IDPA use, some changes and new features were required.

The IDPA Racer Pouch utilizes the same tested and proven Racer Pouch body on an entirely new hanger that allows the slide-onto-belt functionality required for IDPA competitors. The hanger is designed to position the pouch closer to the body, making it suitable for IDPA, but also with an eye to the carry and self-defense markets.

The thumb-adjustable wheel is removed to meet the IDPA rules. Tension adjustment is still possible by means of a pressure screw that can be turned with a hex key, accessed from the back of the pouch body.

The IDPA Racer Hanger is ideal for threading onto medium to thick belts with a width ranging from 1.5” to 2.25” (39 mm to 57 mm), using a set of included click-in spacers. For each belt width use the appropriate spacers to get a solid and secure fit. Interchangeable pouch inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&P mags. A single stack spacer is also available as an accessory.

Please note: These IDPA pouches are designed to be used on IDPA legal leather belts, not on Velcro inner/outer belt systems as used in IPSC, which are not legal for IDPA use. It is very difficult to install these pouches onto our Premium belt, as they are not designed for use on that belt. It is not a recommended combination.

We are pleased to offer the IDPA Magazine Belt attachment separately too, as an accessory to be used with other pouches of your choosing.

This attachment is made of PA66 Nylon with 30% glass fiber, making it extremely tough and durable. It can be used to attach the gear of your choice to any belt, with a thickness up to 8mm and a width of 1.5”-2.25” (39mm-57mm). The hanger includes a set of six spacers which allow you to quickly and easily adjust the width of the mounting slots to suite your belt.

The hanger includes the M5 mounting screw and our unique DAA serrated adaptor plate, which clicks into many DAA products, including our Racer pouches, most of our magnetic pouches, AR15 pouch quad loaders and more. But we also include a larger rubber washer which can be used to attach a Race Master pouch body to this hanger by placing the rubber washer between the hanger and pouch body instead of the serrated washer.

Please note: These IDPA pouches are designed to be used on IDPA legal leather belts, not on Velcro inner/outer belt systems as used in IPSC, which are not legal for IDPA use. It is very difficult to install these pouches onto our Premium belt, as they are not designed for use on that belt. It is not a recommended combination.

Available in Black only

A set of double stack rotating magazine pouches. Interchangeable horizontal and vertical cups allow the shooter to choose the location that best suits him/her.

The kit includes different hardness of magazine retention springs. The white screws regulate the intensity and the free movement of the magazine when inserted.

The Magnetic IPSC magazine was designed with the IPSC shooter in mind. The Magnetic system is available in three versions for unlimited choice of carry options. For stationary matches you can use the MAG1, for running matches with higher risk of losing a magazine you can use the MAG 2. The MAG3 and MAG3D (magnetic pouch double magnet) combines the IPSC pouch with the magnetic system to quickly add a spare magazine without losing another inch of belt space.