Attrezzatura

Rangecart Pro - the ultimate IPSC range cart.

If you have ever attended a match on a really large, spread-out range, you will appreciate how handy and helpful a cart can be. We shooters do tend to lug around a lot of gear and ammo to a big match.

Our new RangeCart Pro is designed from the ground up with the practical shooter in mind. It is designed to be the perfect support product for our RangePack Pro backpack, but can be used equally successfully with almost any range bag.

Made of rugged, top quality aluminum tubes and steel joints and hinges, this range cart can securely carry over 50 kg of gear. And with its wide inflatable all-terrain tires, it can carry that weight anywhere you need to go!

Quick release assembly pins allow you to fold the cart down in seconds, making it possible to pack into any moderately sized suitcase or even the smallest car trunk. You need never leave it behind.

The cart incorporates a clever umbrella holding system, designed to secure a folded or an open umbrella and hold it firmly in place.

The D1000 fabric backing is as functional as it is attractive. On the front top end, positioned high for easy access while standing, is a fold-out ammo shelf, on which you can place 100 rounds of ammo and load your magazines comfortably. A great feature for those ranges without tables! Beside this fold-out tray are a couple of extra magazine pockets, for added convenience.

Built into the back below the rubberized handle is a generous-sized, heat insulated “lunch box” compartment, the perfect place for your fruit, sandwiches and snacks you want with you out on the range. Below that are two large water bottle holders, easily storing 1 L bottles.

Weight: 3.5 kg Wheel Base: 42 cm Handle Height: 113 cm

Note: Umbrella not included.

CED/DAA 8- Pack Deluxe Zippered Magazine Storage Case

The DAA Deluxe Magazine Pack provides safe and protective housing for 8 of your valuable competition magazines. We spend hundreds of Euros on our magazines, and this pouch finally provides a carrying and storing means worthy of their value.

The pouch is large enough to accommodate up to 170 mm long magazines, and its elastic straps adjust to hold any double-stack magazine securely, from the smaller CZ style mags to the larger 2011 magazines used by so many in our sport. Single stack shooters will find that they can insert 2 magazines into each loop, providing place for up to 16 single stack mags.

The DAA Deluxe Magazine Pack is constructed from sturdy, double-layered 600D polyester, with inner foam lining and a striking red interior. A top quality heavy-duty zipper ensures years of reliable service. The convenient steel D-loop provides an attachment point, should you wish to hang the pouch on a larger bag.

A new and practical option for charging your CED7000 shot timer. This custom made USB charge cable enables you to charge your CED7000 from any USB power outlet, from you computer, in your car, or any compatible USB mains power adaptor.

Note: Pictures shows CED7000 timer, which is NOT included with the charge cable.

The Alpha-X holster by Double-Alpha has taken the shooting world by storm, fast becoming the choice of top shooters worldwide. And while the reviews and feedback have been overwhelmingly positive, we have had a few requests for a Thigh Pad option to be made available for this holster.

And we are now pleased to offer you just that – a compact yet effective Thigh Pad option for your Alpha-X holster. No screws or glue required. Simply slide the Thigh Pad on over the bottom of the holster’s belt attachment, until the tabs at the top of the extended arms click into the pockets and keep the Thigh Pad in place. To remove, pull those tabs up and out of the pocket they are clipped into, and slide the piece down and off (it may be a tight fit, to prevent wobble)

Suitable for use on both Right-Hand and Left-Hand holsters.

First batch compatibility issue: Please note! If you have one of the very first holsters (from 2016) your holster hanger does not have the corner chamfer as shown in one of the pictures here. Your hanger is also a little wider, and this Thigh Pad will NOT fit your model holster. Sorry.

* This is a blank Alpha-X holster aseembly only. If you require it with an insert, go the to full holster product page.

In recent years Double-Alpha Academy's competition holsters have been setting the benchmark for advanced design and cutting-edge performance. The Race Master Holster has become the go-to competition holster worldwide for many top Champion shooters in our sport.

Double-Alpha is known for not standing still, and over time the Race Master Holster has been improved. Upgrades and refinements were made to its hanger system and more recently, to the patented insert block, making it magnetic and improving its performance further.

And now, over the past few months, DAA has been working on the next generation holster. We are very proud to introduce the Alpha-X holster!

The ALPHA-X was born of years of experience and market feedback, looking to take the Race Master Holster even further, creating a new fresh, striking look and adding several meaningful performance upgrades.

New Ball Joint and Lock-Up Mechanism

The ball joint of the Alpha-X offers a wide range of motion, allowing you to position your holster at just the right angle. This holster uses a much larger ball joint and a pressure lug lock-up, which locks the ball firmly without marking or damaging it. With this system even the smallest adjustments are always possible.

The ball joint is now located higher up, closer to the center of the holster. This reduces the torque and forces applied, contributing to the solid rigid feel of the holster. 

A large easy-to-reach one-screw locking system allows you to adjust the holster position even when wearing it.

Body Rail Height Adjustment

The Alpha-X achieves its height adjustment by means of a rail built directly into the side of the holster body itself. This offers an extended range of adjustment and again reduces torque and forces applied. Here too the lock up is achieved by an expanding dovetail mechanism that does not gouge or damage the rail.

Detachable Belt Hanger

The Alpha-X has a two-piece belt hanger which can be dismantled by opening a single screw, allowing all position settings to be maintained while removing the holster body from the belt for easier space-saving transport.

The Alpha-X belt bracket is designed to fit only on a 1.5” wide competition style belt. It will not fit on a 1.75” or a 2” belt unless you are prepared to cut a piece out of the belt. And, like all Race holsters, it should only be used on a firm, rigid, thick belt.

Interchangeable Color Logo Inserts

The Alpha-X is available in black anodize only, with an assortment of optional color inserts for the hanger and body logos. You can change these laser-cut plastic inserts whenever you choose.

Details

• Foam windscreens for environmental microphones
• Helps to reduce wind noise and protect the environmental microphones
• For use on a wide variety of 3M™ PELTOR™ Communication Headsets
• 1 pair

Helps to reduce wind noise and protect the environmental microphones. For use on a wide variety of 3M™ PELTOR™ Communication Headsets.

Cut wind interference on 3M™ Peltor™ Cup Microphones with this pair of foam windsocks.  - Also helps extend the life of your microphone  - Cut wind interference on cup microphones  - Extend microphone life  - Works with a wide variety of 3M™ Peltor™ Communications Headset products

Due to popular demand we are now pleased to offer you the DAA Super-Strong magnets, sold separately, for mounting on the DAA Alpha-X / Race Master pouches, or any other type of base you care to use them on.

These Zinc plated magnets are incredibly strong, offering approx. 87kg of pull strength. With these magnets, you can slap on that magazine quickly and confidently and know that it will not fall off as you move. The magnets measure almost 50mm in diameter, and are 12mm thick (with their casing).

Fitting to an Alpha-X / Race Master Pouch:
In the front of the pouch there is a 4.2mm hole, which can be used to attach the magnet to the pouch body. You will need to tap (thread) this hole using an M5 Tap. Do it carefully and slowly as the thread needs to be precise, as there is only a 2.5mm side wall to work with. once done, simply screw the magnet directly onto the front of your leading pouch. We suggest using a little LockTite on it, to keep the screw from opening.

Do not worry if the tip of the screw protrudes slightly into the pouch body - the magazine does not reach down far enough to hit it.

The CED Carbon Fiber EVA Pistol Case combines all the great features desired in an EVA a case.  A hard, protective and cool looking shell. Zippered and lockable with a TSA approved combination lock making it ideal for air travel. A handle for easy carry, and dense eggshell foam for complete protection of your valuable pistol.  Will fit one open class or two production pistols. 

How to set your private combination:

1. Make sure the lock is unlocked – default code is 0,0,0
2. Use a toothpick or pen to press down on the small button located on the top of the lock to the right of the locking tabs. A small click sound can be heard.
3. Rotate the dials to your chosen code. A clicking sound will accompany the rotation of the dials
4. Slide the unlocking lever left to set your combination and exit the setting mode. Your new code is now set.
5. You must have the correct code entered in order to use the above mentioned resetting button. Don’t forget your code!

Available in Black Carbon Fiber finish only. 

Dimensions: 32cm x 21cm x 8.5cm (12.8” x 8.4” x 3.4”)

Optimal attenuation
A gunshot is an impulse noise, which is particularly harmful to the human ear. A single shot can cause permanent damage without the proper hearing protection.
Our range of hearing protectors for shooting are specially designed to attenuate, for example, from noise of a gunshot. for reassured protection.

Easy and comfortable
Many shooters have to wear their hearing protectors for a long time. The range of hearing protectors help ensure you’ll have no problems staying focused. The low, two-point fasteners allow an even distribution of pressure over the whole cushion area, to help ensure the ear muff stays in place even during sudden head movements or positioning the weapon. This feature also helps ensure a snug fit without compromising comfort and protection for high quality sound reproduction.

Hear what you want to hear
Our level dependent hearing protectors contain advanced electronics with built-in microphones.
The level dependent ear muffs can amplify external sounds up to four times which enables the shooter to detect faint sounds helping pin-point targets with great accuracy.
Not only are sounds amplified, but they are also reproduced in stereo, allowing you to detect exactly where they are coming from. You become a better hunter when you can hear your dogs and prey from a greater distance. A direct connection to an external communication radio enhances teamwork with your fellow hunters and boosts safety. Some of the products in the level dependent range allow you to adapt the stereo balance, for example if you have a hearing impairment in one ear.

The unique digital sound circuit eliminates the sharp sound clip that is typical for most level dependent hearing protectors on the market. Many people find that sound unpleasant and disturbing.
The new electronics in the PeltorTM SportTacTM hearing protector react instantane- ously, protecting your hearing from loud impulse noises. The system reacts so gently that you rarely hear the clip as the protection is activated.
Just like the other level dependent hearing protectors from 3M, the SportTac hearing protector also enhances your hearing, so you actually hear better with the hearing protector than without it. The PeltorTM SportTacTM also allows you to connect your hunting radio directly to the headset.

• Specially designed for hunters and marksmen
• Smooth active-volume function that helps prevent the sound being cut off abruptly
• Interchangeable shells make it easy to change colours (black and red shells included)
• Automatic shut-off
• Foldable
• Battery life span about 600 hours
• Audio input for an external radio
• SNR26

Many PCC shooters use extended Glock Magazines, often with long base pads added for even more capacity.

To ensure the best possible retention in our Racer and Race Master mag pouches, we are pleased to offer this dedicated extended Glock Side spacer.

Simply assemble this spacer instead of your short one, and allow the bottom of your long mag to extend out the bottom of the pouch body, for a more balanced more secure retention.

The long spacer offers three hole positions in which to place the stopper, giving you the ability to experiment and decide for yourself what the best depth for your magazine is.

NOTE:  this spacer is not compatible with the Alpha-X line of pouches. Magazine and Magazine Pouch not inlucded!

The DAA Deluxe Magnetic Pouch utilizes two powerful 32mm magnets to hold the magazine securely in place while providing a smoother release than that achieved from the larger standard Magnetic Pouch. The support side walls allow us to use smaller magnets which in turn make the pouches more useable as an all-round pouch for every day use, and not just as a designated pick-up Pouch.

For those shooters who like the simplicity and minimalist look of an open magnetic pouch - this is the perfect choice! The slim body make it possible to position pouches closer together while still leaving enough room to reach down and grab the magazine correctly. The lack of external or front pouch walls allow the pouches to be spaced that much closer together. Perfect for Standard or Production where one must wear the pouches behind the hip bone.

The pouch is attached to our new model belt hanger, which locks securely on any 1.5" belt, clamping down to hold tightly even on thinner belts. The pouch can be swivelled around the centre screw (lower magnet's middle) to angle the pouch as designed. The off-centre mounting point on the hanger offers the option of two heights to choose from. The pouch body is machined from solid Delrin and so is tough and durable. Available in Black only.

Available for Right-Hand users only.

Some shooters prefer to have a muzzle support on their competition holster. This is an indisputable fact.

While most users will find that the Race Master holster functions perfectly without the additional muzzle support, there are some added advantages to using this extension: The muzzle support prevents the gun from being dislodged upwards, which could happen if bumped on the shooters thigh, or against a prop, during a walkthrough. If the holster was left unlocked, the gun can be dislodged. The muzzle support prevents this from happening.

The Wide 2" Belt Hanger for Alpha-X Pouches, is a complete fully-assembled belt hanger for the Alpha-X pouches – enabling the user to attach these pouches to a wider belt. The wide bracket and included spacers will accommodate up to a 2” wide belt, and the two ¼” spacers make it easy to use on a 1.75” belt or a 1.5” belt as well.

The hanger is complete, including the steel bracket on the back with the two removeable spacers, and the ball joint for attachment to the Alpha-X pouch body.

Pouch body and pouch-spacers are not included.

Making the best even better!

The replacement Silicon Gel Kits, include 2 Silicon ear Pads and 2 new insulation cushions. It is important to replace the cushions from time to time, to ensure good hygiene and best sound performance. This upgrade kit gives you extra cushions, in addition to the main item - the new silicon Gel Pads.

You need to try these to best appreciate them. The silicon in the pads is in a gel state, not liquid, so even if punctured it will not leak. The Silicon molds itself around the contour of your head, offering even more comfort and better sound protection that the normal sponge based ear pads.


The Silicon Gel pads really shine when you use the ear protection with shooting glasses, as we usually do. They mold themselves around the arms of the glasses, improving sound protection and preventing pressure of the glasses against your head.

The Sordin Silicon Gel Ear pads can be used with all the Sordin models offered here - the Supreme Pro, Pro-X and Pro+3. The original pads are easily replaced, and can be kept as spares for future use. No modification is needed to the ear defenders when using this silicon gel upgrade kit.

Lets you hear what you need to hear. Protects you from what you don't. 

Enter the ZemZone where loud damaging noise is suppressed yet you can hear the conversation of others around you. You will improve your concentration, be more productive and feel better at the end of the day. The ZemZone. It's the safe sound world for your ears.  A quiet revolution at work, at play, at home Improved Performance 

• High noise reduction across all frequencies
• No distortion of sound
• Blocks harmful noise but allows speech and other useful sounds to be heard

Greater Comfort

• Lightweight (less than 2 ounces)
• Adjustable head band
• Comfortable for extended use

Increased Safety

• High speech intelligibility
• Hear shouts or warning signals
• No need to remove hearing protection to have a conversation

Convenient

• Folds for easy storage in shirt pocket      or
• Drop around the neck while not in use