Gear

Handy little steel punch tool, designed to make removing the rolls pins quick and easy. Should you need to remove a link, or wish to insert another, removing the roll pin can be difficult without a punch tool. With this little tool, the task is easy, and being compact and lightweight lets you leave it in your range bag tool kit.

The LV M4 rolls with how you need to roll, as a backpack or a crossbody bag, to carry up to a 32” rifle in low-vis style. This pack makes it easy to stay organized, too. Its front compartment features a laser-cut loop panel and internal mesh pocket. There’s a top fleece-lined pocket to keep your eye protection secure, or flip the pocket inside out to hold your ID panel/patch. Stay ready and under the radar with the LV M4.

DIMENSION

Main Compartment - 32"H x 12"L x 2"D Total Capacity - 1190 cubic inches / 19.5 Liters Weight - 3.4 lbs

RC-tech Shooting vest is designed specifically for IPSC to allow fastest weapon draw and movement on the stage. Designed to be as soft as possible and to allow max body movement. Featuring a foldable hood for bad weather, breast pockets and, accessorie velcro patch and straps for hanging gear, timers, etc..

FOR SIZE CHART CLICK ON ATTACHMENT TAB

The BabyUpLULA loader is a military quality personal pistol magazine loader for 0.22 to .380 caliber rounds. It is a radical new design, which allows for easy and smooth loading of practically ALL single and double stack pistol magazines in these small calibers (for larger calibers use the UPLULA).

While loading you can support the base of the magazine on your body/thigh or on a table when available.

Features:
- Loads all .22-.380 caliber magazines- No inserts, spacers or adjustments at all! One size fits all.
- Easy and quick loading; Rounds just drop in with no fingers pushing or forcing the rounds.
- Up to one round per sec. loading rate, with some practice.
- Fits in your hand and pocket, weighs only 50 grams.
- Highly durable - constructed of the best reinforced polymer.
- No more strain or pain when loading those mags!
- Load hundreds of rounds, easily.

Does not load the following:
Converted .22 mags. .22L
Kimber .22 .22LR
S&W 22A/22S .22LR
Beretta U22 NEOS .22LR
Walther P22 .22LR
Browning .380 BDA .380
Beretta 84 .380 .380
Beretta 81 .32 .32
Tuaras PT380 .380
Colt ACE .22LR
GSG 1911 .22LR
Ruger SR22 .22LR

The Universal Ghost Hybrid Pouch is supplied with internal retention of the magazine and gives complete carry freedom and flexibility due to the rotating speed clip. Different types of retention springs are available to ensure the best suited retention for your needs. The cup is also equipped with a system to remove all magazine movement inside the pouch. Thanks to the clip, you can use belts up to 4 cm in width.

Introducing Hydra, the newest addition to the competition race holster line-up by Ghost.

SPUD

Designed for the sportsmen on the move, the SPUD features loads of storage room along with molded-in bungee hook receiver so you can strap it down tight to anything, from a fishing boat to an ATV.

The SPUD 7's spacious design offers a whopping 2,073 cubic inches of dry storage. It can carry items up to 14 inches tall. It is also the perfect height (15 inches) for dove and waterfowl blind hunting and as a chair when using MTM's predator shooting table. It also comes with a nylon shoulder strap for hands free carrying. Load one up for the range and then use it for a chair once you get there!

The SPUD 7 offers several features including: Water resistant O-ring seal; top access lid compartment ; deep 2/3 length lift out tray; four Bungee hook receivers; large comfortable handle; thick sidewall construction; heavy-duty snapping latches; and double padlock tabs.

RC-tech Special Shot Timer is a 3 in 1 multipurpose timer with modes for firearms, airsoft, and stopwatch. Specially made for IPSC, AAPSC, IDPA, 3GUN SPORTS. Charging cable and belt clip are included.

Some shooters prefer to have a muzzle support on their competition holster. This is an indisputable fact.

While most users will find that the Race Master holster functions perfectly without the additional muzzle support, there are some added advantages to using this extension: The muzzle support prevents the gun from being dislodged upwards, which could happen if bumped on the shooters thigh, or against a prop, during a walkthrough. If the holster was left unlocked, the gun can be dislodged. The muzzle support prevents this from happening.

The DAA Single Stack Magnetic Pouch is our latest magnetic pouch design, offering an ultra-compact and ultra-efficient magazine holding system for single stack shooters.

It positions the magazine only in the 90 deg “away from the body position” and is an excellent option for shooters who choose to carry their magazines this way, as many single stack shooters do.

The DAA Single Stack Magnetic Pouch utilizes two small yet powerful magnets that hold the magazine firmly in place while allowing it to rest inside its supporting track. The track guides the magazine in and out of the pouch and prevents it from accidentally being dislodged. The release achieved from this magnetic pouch is the smoothest of any of our magnetic pouches, partly due to the smaller contact area with the single stack magazines.

The belt hanger is the same as that used in the Racer pouches - the same minimalist steel plate design which eliminates separation between your inner and outer belt. The pouch can be adjusted for tilt in very small steps, allowing you to find your preferred angle. Once the correct angle is set and the center screw tightened, the serrations in the connector piece lock up, preventing any possibility of the pouch rotating until the center screw is loosened several turns.

With a dual-layer reversible design that offers two different color options, the 1.75” Double Duty TDU® Belt offers exceptional versatility in a quick and efficient design.

Rugged, convenient, and highly functional, the 5.11® Double Pistol Case is an ideal sidearm storage solution. It allows you to safely and securely transport two pistols and plenty of mags. Imported.

DIMENSIONS

8.75"H x 11"L x 3.5"D

The 3M PELTOR ProTac III hearing protector helps protect against harmful noise, whilst allowing ambient sounds to be heard at a level below 82dB. It increases your ability to communicate with nearby colleagues, as well as hearing warning signals, approaching vehicles, or sounds in machines and processes.

* This is a blank Alpha-X holster aseembly only. If you require it with an insert, go the to full holster product page.

The IDPA PDR PRO-II holster incorporates our latest generation Kydex holster body, as used in the popular PDR PRO-II holster. It is an efficient, fast holster body, available for many popular gun types for both right and left handed shooters.

The PDR-PRO-II holster body does not include the Suede lining that the PDR offers, making it more suitable for competition use, where speed and ease of draw are paramount. Attaching this PDR-PRO-II body to our Belt-Ride Ambidextrous Hanger, makes this holster a perfect choice for IDPA competitors or for general carry and range use. The bare Kydex cannot be beaten for speed, quick release and smooth draw. Tension adjustment is done by turning one, or both Phillips head screws, which are accessible from the outside of the holster body, while worn.

This hanger positions the holster body up close against the body and provides you a solid, yet tilt adjustable holster mount. It can be used with 1.5-2” wide belts and is fully ambidextrous, working equally well for RH or LH holsters. If you are using the belt spacers (most will, as most use a 1.5” belt) you can choose to have those spacers both above, below, or one above and one below the belt as you thread it through. This will provide you some height adjustment.

Available for right or left handed shooters, in Black only.

The unique retention system that all DAA pouches utilize has made the Racer Pouch a very popular choice for competition shooters worldwide. However, to make it suitable for IDPA use, some changes and new features were required.

The IDPA Racer Pouch utilizes the same tested and proven Racer Pouch body on an entirely new hanger that allows the slide-onto-belt functionality required for IDPA competitors. The hanger is designed to position the pouch closer to the body, making it suitable for IDPA, but also with an eye to the carry and self-defense markets.

The thumb-adjustable wheel is removed to meet the IDPA rules. Tension adjustment is still possible by means of a pressure screw that can be turned with a hex key, accessed from the back of the pouch body.

The IDPA Racer Hanger is ideal for threading onto medium to thick belts with a width ranging from 1.5” to 2.25” (39 mm to 57 mm), using a set of included click-in spacers. For each belt width use the appropriate spacers to get a solid and secure fit. Interchangeable pouch inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&P mags. A single stack spacer is also available as an accessory.

Please note: These IDPA pouches are designed to be used on IDPA legal leather belts, not on Velcro inner/outer belt systems as used in IPSC, which are not legal for IDPA use. It is very difficult to install these pouches onto our Premium belt, as they are not designed for use on that belt. It is not a recommended combination.

This new exciting product from Maglula is the most compact and versatile AR15 loader ever introduced. The StripLula will fit all plastic and metal AR15 magazines, clip onto the top lips and allow you to quickly and effortlessly load your mags.

It can be used to load ammo packed in stripper clips (12 seconds to load 30 rounds) or it can be used to load individual rounds(40 seconds to load 30 rounds).

It can even be used as a simply unloader, allowing the unloading of a 30 round magazine in 15 seconds flat.

If you shoot an AR15 – you’ve to have one of these!

Belt Clip for the CED 7000. The custom belt clip incorporates a hinge system that allows the timer to be rotated upwards for comfortable viewing of the LCD display, and to be laid flat against the body when shooting or timing other shooters.

The belt clip is designed to be used with broad competition style belts and fits your CED 7000 with or without silicone skin. An antislip inlay is provided to protect your timer against scratches when using without silicone skin.