Equipo

The 3M PELTOR ProTac III hearing protector helps protect against harmful noise, whilst allowing ambient sounds to be heard at a level below 82dB. It increases your ability to communicate with nearby colleagues, as well as hearing warning signals, approaching vehicles, or sounds in machines and processes.

Noise reduction 26 decibel.

• Built-in level-dependent function allows the wearer to hear ambient sounds, such as conversations, machine sounds and warning signals
• 3.5 mm listen only stereo input (limited to 82 dB) for connection to external devices (e.g. mobile phone, radio, two-way radio and iPod)
• Voice guided menu system to prevent you from taking the headset off
• Auto power off turns headset off after 4 hours of non-use, to save energy and a low-battery warning informs you when to change batteries
• To reduce the corrosion caused by sweat the electronics are located in the outer part of the cup

Muy alta calidad

compre más de 10 piezas y obtenga un 10% de descuento

Dimensions: 
Main compartment - 12.5" X 7" X 10" Tall 
Main compartment has two internal flat pockets, 5.5" Wide X 7.5" Tall 
The top flap has two mesh pockets 

End Pockets - 8.5" Tall X 6.5" Wide X 2"Deep 

Front Pocket - 9" tall X 6" Wide X 2" Deep 

2 Round front pouches, 3" Diameter, for water bottles or empty brass 

The back has a double bellows pocket with a velcro divider that measures 7" Tall X 9" Wide 

The Dillon D-Terminator Scale is a hi-end professional grade scale. Using new load cell technology and advanced software, this digital scale provides accuracy up to 900 grains at 0.1 grain or 0.01 gram increments. Fast, stable, and accurate! The Dillon D-Terminator Scale is the only one you will want on your reloading workbench.

Key features:
900 grain/57 gram capacity
Accurate to 0.1 grain/0.01 gram
Supplied with dust/wind shield cover, stainless steel powder pan, including 50 gram calibration weight
Uses 4 AA batteries (included).

The Magnetic IPSC magazine was designed with the IPSC shooter in mind. The Magnetic system is available in three versions for unlimited choice of carry options. For stationary matches you can use the MAG1, for running matches with higher risk of losing a magazine you can use the MAG 2. The MAG3 and MAG3D (magnetic pouch double magnet) combines the IPSC pouch with the magnetic system to quickly add a spare magazine without losing another inch of belt space.

The new Port Charger Universal Ghost 360 comes with two cups (vertical and horizontal) this allows the shooter to choose the location that best suits its characteristics.

The kit includes two different types of retention for the springs (strong and medium). The white screws regulate the intensity and the movement of the charger when it is inserted.

BUL Blades with G10 Grip  

420 Stainless Steel 

We are pleased to offer the IDPA Magazine Belt attachment separately too, as an accessory to be used with other pouches of your choosing.

This attachment is made of PA66 Nylon with 30% glass fiber, making it extremely tough and durable. It can be used to attach the gear of your choice to any belt, with a thickness up to 8mm and a width of 1.5”-2.25” (39mm-57mm). The hanger includes a set of six spacers which allow you to quickly and easily adjust the width of the mounting slots to suite your belt.

The hanger includes the M5 mounting screw and our unique DAA serrated adaptor plate, which clicks into many DAA products, including our Racer pouches, most of our magnetic pouches, AR15 pouch quad loaders and more. But we also include a larger rubber washer which can be used to attach a Race Master pouch body to this hanger by placing the rubber washer between the hanger and pouch body instead of the serrated washer.

Please note: These IDPA pouches are designed to be used on IDPA legal leather belts, not on Velcro inner/outer belt systems as used in IPSC, which are not legal for IDPA use. It is very difficult to install these pouches onto our Premium belt, as they are not designed for use on that belt. It is not a recommended combination.

Available in Black only

The unique retention system that all DAA pouches utilize has made the Racer Pouch a very popular choice for competition shooters worldwide. However, to make it suitable for IDPA use, some changes and new features were required.

The IDPA Racer Pouch utilizes the same tested and proven Racer Pouch body on an entirely new hanger that allows the slide-onto-belt functionality required for IDPA competitors. The hanger is designed to position the pouch closer to the body, making it suitable for IDPA, but also with an eye to the carry and self-defense markets.

The thumb-adjustable wheel is removed to meet the IDPA rules. Tension adjustment is still possible by means of a pressure screw that can be turned with a hex key, accessed from the back of the pouch body.

The IDPA Racer Hanger is ideal for threading onto medium to thick belts with a width ranging from 1.5” to 2.25” (39 mm to 57 mm), using a set of included click-in spacers. For each belt width use the appropriate spacers to get a solid and secure fit. Interchangeable pouch inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&P mags. A single stack spacer is also available as an accessory.

Please note: These IDPA pouches are designed to be used on IDPA legal leather belts, not on Velcro inner/outer belt systems as used in IPSC, which are not legal for IDPA use. It is very difficult to install these pouches onto our Premium belt, as they are not designed for use on that belt. It is not a recommended combination.