Seleziona il marchio
 
Marca

Napredno iskanje

Attrezzatura

161.04  

Optimal attenuation
A gunshot is an impulse noise, which is particularly harmful to the human ear. A single shot can cause permanent damage without the proper hearing protection.
Our range of hearing protectors for shooting are specially designed to attenuate, for example, from noise of a gunshot. for reassured protection.

Easy and comfortable
Many shooters have to wear their hearing protectors for a long time. The range of hearing protectors help ensure you’ll have no problems staying focused. The low, two-point fasteners allow an even distribution of pressure over the whole cushion area, to help ensure the ear muff stays in place even during sudden head movements or positioning the weapon. This feature also helps ensure a snug fit without compromising comfort and protection for high quality sound reproduction.

Hear what you want to hear
Our level dependent hearing protectors contain advanced electronics with built-in microphones.
The level dependent ear muffs can amplify external sounds up to four times which enables the shooter to detect faint sounds helping pin-point targets with great accuracy.
Not only are sounds amplified, but they are also reproduced in stereo, allowing you to detect exactly where they are coming from. You become a better hunter when you can hear your dogs and prey from a greater distance. A direct connection to an external communication radio enhances teamwork with your fellow hunters and boosts safety. Some of the products in the level dependent range allow you to adapt the stereo balance, for example if you have a hearing impairment in one ear.

The unique digital sound circuit eliminates the sharp sound clip that is typical for most level dependent hearing protectors on the market. Many people find that sound unpleasant and disturbing.
The new electronics in the PeltorTM SportTacTM hearing protector react instantane- ously, protecting your hearing from loud impulse noises. The system reacts so gently that you rarely hear the clip as the protection is activated.
Just like the other level dependent hearing protectors from 3M, the SportTac hearing protector also enhances your hearing, so you actually hear better with the hearing protector than without it. The PeltorTM SportTacTM also allows you to connect your hunting radio directly to the headset.

• Specially designed for hunters and marksmen
• Smooth active-volume function that helps prevent the sound being cut off abruptly
• Interchangeable shells make it easy to change colours (black and red shells included)
• Automatic shut-off
• Foldable
• Battery life span about 600 hours
• Audio input for an external radio
• SNR26

Disponibile
+

14.84  
Disponibile
+

24.55  

The CED Carbon Fiber EVA Pistol Case combines all the great features desired in an EVA a case.  A hard, protective and cool looking shell. Zippered and lockable with a TSA approved combination lock making it ideal for air travel. A handle for easy carry, and dense eggshell foam for complete protection of your valuable pistol.  Will fit one open class or two production pistols. 

How to set your private combination:

  1. Make sure the lock is unlocked – default code is 0,0,0
  2. Use a toothpick or pen to press down on the small button located on the top of the lock to the right of the locking tabs. A small click sound can be heard.
  3. Rotate the dials to your chosen code. A clicking sound will accompany the rotation of the dials
  4. Slide the unlocking lever left to set your combination and exit the setting mode. Your new code is now set.
  5. You must have the correct code entered in order to use the above mentioned resetting button. Don’t forget your code!

Available in Black Carbon Fiber finish only. 

Dimensions: 32cm x 21cm x 8.5cm (12.8” x 8.4” x 3.4”)


16.39  

Due to popular demand we are now pleased to offer you the DAA Super-Strong magnets, sold separately, for mounting on the DAA Alpha-X / Race Master pouches, or any other type of base you care to use them on.

These Zinc plated magnets are incredibly strong, offering approx. 87kg of pull strength. With these magnets, you can slap on that magazine quickly and confidently and know that it will not fall off as you move. The magnets measure almost 50mm in diameter, and are 12mm thick (with their casing).

Fitting to an Alpha-X / Race Master Pouch:
In the front of the pouch there is a 4.2mm hole, which can be used to attach the magnet to the pouch body. You will need to tap (thread) this hole using an M5 Tap. Do it carefully and slowly as the thread needs to be precise, as there is only a 2.5mm side wall to work with. once done, simply screw the magnet directly onto the front of your leading pouch. We suggest using a little LockTite on it, to keep the screw from opening.

Do not worry if the tip of the screw protrudes slightly into the pouch body - the magazine does not reach down far enough to hit it.

Disponibile
+

81.15  
Disponibile
+


3.24  
Disponibile
+

12.30  

Details

  • Foam windscreens for environmental microphones
  • Helps to reduce wind noise and protect the environmental microphones
  • For use on a wide variety of 3M™ PELTOR™ Communication Headsets
  • 1 pair

Helps to reduce wind noise and protect the environmental microphones. For use on a wide variety of 3M™ PELTOR™ Communication Headsets.

Cut wind interference on 3M™ Peltor™ Cup Microphones with this pair of foam windsocks.  - Also helps extend the life of your microphone  - Cut wind interference on cup microphones  - Extend microphone life  - Works with a wide variety of 3M™ Peltor™ Communications Headset products

Disponibile
+

20.49  
Disponibile
+

167.21  

* This is a blank Alpha-X holster aseembly only. If you require it with an insert, go the to full holster product page.

In recent years Double-Alpha Academy's competition holsters have been setting the benchmark for advanced design and cutting-edge performance. The Race Master Holster has become the go-to competition holster worldwide for many top Champion shooters in our sport.

Double-Alpha is known for not standing still, and over time the Race Master Holster has been improved. Upgrades and refinements were made to its hanger system and more recently, to the patented insert block, making it magnetic and improving its performance further.

And now, over the past few months, DAA has been working on the next generation holster. We are very proud to introduce the Alpha-X holster!

The ALPHA-X was born of years of experience and market feedback, looking to take the Race Master Holster even further, creating a new fresh, striking look and adding several meaningful performance upgrades.

 

New Ball Joint and Lock-Up Mechanism

The ball joint of the Alpha-X offers a wide range of motion, allowing you to position your holster at just the right angle. This holster uses a much larger ball joint and a pressure lug lock-up, which locks the ball firmly without marking or damaging it. With this system even the smallest adjustments are always possible.

The ball joint is now located higher up, closer to the center of the holster. This reduces the torque and forces applied, contributing to the solid rigid feel of the holster. 

A large easy-to-reach one-screw locking system allows you to adjust the holster position even when wearing it.

 

Body Rail Height Adjustment

The Alpha-X achieves its height adjustment by means of a rail built directly into the side of the holster body itself. This offers an extended range of adjustment and again reduces torque and forces applied. Here too the lock up is achieved by an expanding dovetail mechanism that does not gouge or damage the rail.

 

Detachable Belt Hanger

The Alpha-X has a two-piece belt hanger which can be dismantled by opening a single screw, allowing all position settings to be maintained while removing the holster body from the belt for easier space-saving transport.

The Alpha-X belt bracket is designed to fit only on a 1.5” wide competition style belt. It will not fit on a 1.75” or a 2” belt unless you are prepared to cut a piece out of the belt. And, like all Race holsters, it should only be used on a firm, rigid, thick belt.

 

Interchangeable Color Logo Inserts

The Alpha-X is available in black anodize only, with an assortment of optional color inserts for the hanger and body logos. You can change these laser-cut plastic inserts whenever you choose.

 

Disponibile
+

32.78  
Long
Disponibile
+

24.55  
he DAA Magnetic Magazine Pouch just got EVEN BETTER! We are pleased to announce that effective immediately all DAA Magnetic pouches now ship with the "Clip On" base pad. This new innovative base pad greatly reduces the amount of bulk on your belt, taking up less space and creating less of a...