Select your country
Please select your country
Cart is empty
No items found matching the search criteria
The Wide 2" Belt Hanger for Alpha-X Pouches, is a complete fully-assembled belt hanger for the Alpha-X pouches – enabling the user to attach these pouches to a wider belt. The wide bracket and included spacers will accommodate up to a 2” wide belt, and the two ¼” spacers make it easy to use on a 1.75” belt or a 1.5” belt as well.
The hanger is complete, including the steel bracket on the back with the two removeable spacers, and the ball joint for attachment to the Alpha-X pouch body.
Pouch body and pouch-spacers are not included.
The Ultimate Swinger is probably the most portable and versatile moving target on the gravity moving target market, as its collapsible design makes it easy to set up and move around. An adjustable height trigger is also included. Trigger with a piece of pipe.
EXTREMELY COMPACT DESIGN, PACKAGE: 57x35x15 cm, 17kg
Target double stand base. Holds wooden posts 25x50mm on wich targets are than mounted. Very low profile and easy to transport.
EXTREMELY COMPACT DESIGN, PACKAGE: 58x35x7 cm, 3kg
This set includes 4 Rhino bases and 4 square plates. The base is designed to be easily disassembled for transport. Also has a movable cover shield for plate mount. Plate hanger is designed to make it easy and fast to mount and reset plates.
EXTREMELY COMPACT DESIGN, PACKAGE: 58x35x7 cm, 22kg
Ergomonic design for easy transport between ranges. Hi guality steel construction, with 2 6" hrdox AR500 plates.
EXTREMELY COMPACT DESIGN, PACKAGE: 58x35x16 cm, 26.5kg
Targets USA classic popper is a versitile and practical steel target, that has multiple ways of use.
EXTREMELY COMPACT DESIGN, PACKAGE: 57x35x15 cm, 11kg
This is the new "Holy Monkey" swinger kit. Only components needed to finish setting up will be a stick or piece of pipe to mount our adjustable activator trigger piece on, some short target sticks and a target. Holy Monkey is designed to have an offset swing, so it is a litle more difficult to hit.
EXTREMELY COMPACT DESIGN, PACKAGE: 73x30x20 cm, 33kg
Target double extendable stand base. Holds wooden posts 25x50mm on wich targets are than mounted. Very low profile and easy to transport.
T
Targets USA-s "The Ripper" spring activator set. The activator is made of AR500 steel so its bullet proof. Spring will pull around 12 kg. Activator is fixed to the wood beam by screws.
EXTREMELY COMPACT DESIGN, PACKAGE: 58x36x12 cm, 10kg
buy more than 10 peaces and get 10% discount
This new exciting product from Maglula is the most compact and versatile AR15 loader ever introduced. The StripLula will fit all plastic and metal AR15 magazines, clip onto the top lips and allow you to quickly and effortlessly load your mags.
It can be used to load ammo packed in stripper clips (12 seconds to load 30 rounds) or it can be used to load individual rounds(40 seconds to load 30 rounds).
It can even be used as a simply unloader, allowing the unloading of a 30 round magazine in 15 seconds flat.
If you shoot an AR15 – you’ve to have one of these!
RC tech Special Range Bag is a high quality multipurpose range bag for your IPSC/IDPA gear. A large central pocket and lots of smaller side pockets make organizing your gear easy and fast. Featrues velcor main compartment cover, sturdy carrying gandles, pouch with magazine loops and more.
This smaller range backpack is the perfect companion for a PCC match or other events where you dont feel like hauling all your gear. Streamline but still able to hold quite a bit of gear. Also great for any sports or travel activity.
RC-Tech shooting backpack is designed with practicality in mind. We developed this backpack from the ground up, and made it so u can carry all you need and much you don't with ease. It fits perfectly on your RC-Tech range trolly.
With pneumatic tires and up to 100kg load capacity RC-Tech range trolley is perfect for transporting your gear arround the range. With a small pack size, it takes up little space when not in use.
RC-Tech trolley upgrade set consist of two items. A lower harder pad that also acts as a siting area and upper cover with two water bottle pouches, velcro area and straps for securing your rifle so it doesnt fall over. A must have ugrade for RC-Tech range trolley.
RC-tech pouch for 7 magazines and velcro cover.
NOTE:
RC-tech Kydex holsters for PCC mags are strong and very low-profile. Ideal for fast movements on IPSC,IDPA and USPSA stages. They hold your mags firmly but allow mag access and extraction. They can be tilted forward or back for maximum shooter comfort and mobility.
First photo shows 4 different poucher for different tipes of mags. The pouches are sold as single items not sets.
RC Tech Hard Cover Pistol Bag up to 6" barell is designed to sotre and carry pistols with barrel lenght up to 6". This case has hard covers for maximum protection and durability.
Does not fit Open category pistols.
RC Tech bag for 2 pistol + 12 Magazines is designed to carry two guns up to 6" inch long barell and has space for 12 magazines.
Soft padded pouches that protect your gun.
Open guns do not fit.
Handy pouch for carrying rounds and magazines to and from the range. This is an essential piece of kit that allows you to carry rounds and magazines together in one bag.
RC-tech 65mm ruberized magnet is a very convenient accessory as it allows a quick and easy attachment of magazines. Due to the large surface, this magnet can easily hold 2-3 magazines at the same time. An universal magnet mounting bracket is suplied in the package.
The red magazine pouch is not included, it just shows one possible way of mounting the magnet.
With Production Division on the rise and many shooters in this IPSC Division choosing a Kydex closed-body holster (and all USPSA Production shooters having to use it), creating a better Kydex holster is always high on our agenda. We believe in constantly striving to improve all our products, and the new innovations in the PDR PRO-II holster reflect that philosophy.
We took a long hard look at our PDR PRO holster, and combined with valuable customer feedback decided to make some changes to improve the product further.
>span class="s1">We upgraded this part from plastic to aluminum, and redesigned the manner in which the height adjustment and vertical lock-up is achieved. The PDR PRO-II now has a set screw in the ball itself, which can be accessed from its inner side, allowing you to adjust height to any position, not just in the predetermined 10 mm steps as before. Also this height adjustment can now be achieved without dismantling the holster and without losing any of the other settings.
>span class="s1"
>span class="s1">And of course the excellent features of the PDR PRO line have been retained: the slick fast unlined body, the advanced ball joint belt hanger with its wide range of adjustability, slim-line retention bars and spacers for use on competition belts ranging from 1.5”-2.0” in width.
Available only in Black, for right-handed or left-handed shooters.
SPUD
Designed for the sportsmen on the move, the SPUD features loads of storage room along with molded-in bungee hook receiver so you can strap it down tight to anything, from a fishing boat to an ATV. The SPUD 7's spacious design offers a whopping 2,073 cubic inches of dry storage. It can carry items up to 14 inches tall. It is also the perfect height (15 inches) for dove and waterfowl blind hunting and as a chair when using MTM's predator shooting table. It also comes with a nylon shoulder strap for hands free carrying. Load one up for the range and then use it for a chair once you get there! The SPUD 7 offers several features including: Water resistant O-ring seal; top access lid compartment ; deep 2/3 length lift out tray; four Bungee hook receivers; large comfortable handle; thick sidewall construction; heavy-duty snapping latches; and double padlock tabs.
No wasted space here. The SPUD features an 80% usable, top access lid compartment. The compartment contains five sectioned areas where you can keep your small items separate and safe. Many features including: water resistant O-Ring seal; five section lid compartment; full size lift out tray; large comfortable handle; thick sidewall construction; heavy duty latch; and double padlock tabs.
This hopper-fed, loose-ammo loader eliminates hand fatigue and reduces magazine loading time by more than 50 percent. Simply load your ammo in the 50-round capacity hopper and let MagPump do the rest. The pump-action lever self-sorts ammunition in either direction, and loads up to 30 rounds in less than 30 seconds.
A set of two loaders for loading .22LR cal. single-stack wider mags with a projecting side-button, such as:
A set of two loaders for loading .22LR cal. single-stack narrow mags with a projecting side-button, such as:
Uplula, divice to load and unload your magazines. Easy and quick loading and unloading. The UpLULA loader is a military quality personal universal pistol magazine loader. Easy and quick loading. Rounds just drop in with no fingers pushing or forcing the rounds. Up to one round per sec. loading rate, with some practice. Fits in your hand and pocket, weighs only 66 grams (2.3 Ounce). Highly durable - constructed of the best reinforced polymer. No more strain or pain when loading those mags!
Fits Scorpion 9mm-type polymer magazines Ver #1 & Ver #2. The LULA loader & unloader is a military quality personal magazine loader and unloader. It facilitates both loading of loose rounds into a magazine and unloading them out of the magazine. It does so quickly, safely and comfortably. Usable for tens-of-thousands rounds.
The Range BenchLoader™ loaders is a heavy-duty industrial 5.56 / .223 cal magazine loaders made to load a magazine in a single hand stroke. It is intended for daily loading of hundreds of magazines at shooting ranges and armories. It totally eliminates fingers pain and injury, shorten loading time, and keep the magazines lips intact.Loads all AR15 / M4 compatible 5.56 / .223 magazines, like:- M16 / AR15 / M4 USGI (NATO STANAG 4179)- Magpul PMAG- SCAR 16- H&K metal 416 / SA80- SureFire 60 & 100 rd- Beretta AR 70-90- Lancer *- and all others
The LULA loader & unloader is a military quality personal magazine loader and unloader. It facilitates both loading of loose rounds into a magazine and unloading them out of the magazine. It does so quickly, safely and comfortably. Usable for tens-of-thousands rounds.
Advantages: Both Loads AND Unloads FAST! 35sec to load 30 rd, 5sec unloading 30 rd. Safe on fingers and magazine, absolutely no sore thumb! Pocket size, just drop on in your range bag! Durable, made of the best quality glass-reinforced polymer Weights approx. 38grams (1.3ounce) Constructed of only two parts ISO9002 manufacturing Chemicals resistant
Other advantages: A huge time saver when several magazines need to be cleaned (unloaded and reloaded). Needs no dexterity or training to use, suites right and left handed users Needs no maintenance at all. Useable also in zero light environment. Useable with gloves in freezing weather. Loading 1. "Click" the LULA loader over the open end of the magazine; 2. Have the LULA loader and magazine face upwards; and 3. Move the lever to-and-fro as you feed rounds into the magazine.
Unloading 1. "Click" the LULA loader over the open end of the magazine; 2. Have the LULA loader and magazine face downwards; and 3. Move the lever to-and-fro as the rounds expel out of the magazine.
That's it !
Laser cut plastic logo inlays for the Alpha-X holster body and hanger. These inlays have 3M tape on their back for easy installation on the holster assembly.
Note that it is possible to remove the color inlays and swap them for a new color when desired. However, the old color inlay may break when removed.
The IDPA PDR PRO-II holster incorporates our latest generation Kydex holster body, as used in the popular PDR PRO-II holster. It is an efficient, fast holster body, available for many popular gun types for both right and left handed shooters.
The PDR-PRO-II holster body does not include the Suede lining that the PDR offers, making it more suitable for competition use, where speed and ease of draw are paramount. Attaching this PDR-PRO-II body to our Belt-Ride Ambidextrous Hanger, makes this holster a perfect choice for IDPA competitors or for general carry and range use. The bare Kydex cannot be beaten for speed, quick release and smooth draw. Tension adjustment is done by turning one, or both Phillips head screws, which are accessible from the outside of the holster body, while worn.
This hanger positions the holster body up close against the body and provides you a solid, yet tilt adjustable holster mount. It can be used with 1.5-2” wide belts and is fully ambidextrous, working equally well for RH or LH holsters. If you are using the belt spacers (most will, as most use a 1.5” belt) you can choose to have those spacers both above, below, or one above and one below the belt as you thread it through. This will provide you some height adjustment.
Available for right or left handed shooters, in Black only.
Only the Hybrid Belt Attach. New aluminum belt system for all 5cm belts. Compatible for all Hybrid/Tunder/Civilian bodys.
The EVOLUTION of the famous AMADINI Ghost SphereSystem has resulted in the ULTIMATE (Superghost). This holster is the fastest, safest and most innovative IPSC holster in the world. Copied by many, equalled by none, the Ultimate is the choice of shooters all over the world. Fully free-floating, adjustable in tilt, height and distance from your body, the Ultimate can be made to fit your needs 100%. The locking mechanism is the safest and fastest on the market and allows you to draw straight from the holster without having to lift the gun first.
Perfect fitting and durable hybrid holsters made by Ghost International for most guns used in IDPA and IPSC. Available in left and right hand, adjustable to fit snugly.
The Magnetic IPSC magazine was designed with the IPSC shooter in mind. The Magnetic system is available in three versions for unlimited choice of carry options. For stationary matches you can use the MAG1, for running matches with higher risk of losing a magazine you can use the MAG 2. The MAG3 and MAG3D (magnetic pouch double magnet) combines the IPSC pouch with the magnetic system to quickly add a spare magazine without losing another inch of belt space.
Ghost magazine pouch for PCC has an extended stop plate, so the magazine sits lower in the pouch.
Magazine pouch made of ABS which is a high impact resistant polymer. An internal tension spring holds the magazine firmly inside the pouch. Thanks to a reduced spacer and pouch size it is ideal for concealed carry – both for police and military as well for sport (IDPA, IPSC and ACTION SHOOTING).
Slide the module between the Molle straps and use the same holster you are familiar with on your OPS vest.