Select your country here
Please select your country
Корзина пуста
По этим критериям поиска ничего не найдено
We are pleased to offer the IDPA Magazine Belt attachment separately too, as an accessory to be used with other pouches of your choosing.
This attachment is made of PA66 Nylon with 30% glass fiber, making it extremely tough and durable. It can be used to attach the gear of your choice to any belt, with a thickness up to 8mm and a width of 1.5”-2.25” (39mm-57mm). The hanger includes a set of six spacers which allow you to quickly and easily adjust the width of the mounting slots to suite your belt.
The hanger includes the M5 mounting screw and our unique DAA serrated adaptor plate, which clicks into many DAA products, including our Racer pouches, most of our magnetic pouches, AR15 pouch quad loaders and more. But we also include a larger rubber washer which can be used to attach a Race Master pouch body to this hanger by placing the rubber washer between the hanger and pouch body instead of the serrated washer.
Please note: These IDPA pouches are designed to be used on IDPA legal leather belts, not on Velcro inner/outer belt systems as used in IPSC, which are not legal for IDPA use. It is very difficult to install these pouches onto our Premium belt, as they are not designed for use on that belt. It is not a recommended combination.
Available in Black only
Magazine pouch made of ABS which is a high impact resistant polymer. An internal tension spring holds the magazine firmly inside the pouch. Thanks to a reduced spacer and size it is ideal for concealed carry – both for police and military as well for sport (IDPA, IPSC and ACTION SHOOTING).
The DAA Magnet Cover is a practical and super-attractive addition to your Rig!
Designed to perfectly fit on the DAA 48mm large magnets, this cover is custom made from durable nylon, rubber coated, and incorporates a laser-cut stainless-steel (430) DAA Logo.
The logo itself is what firmly holds the cover in place – being made of magnetic stainless-steel, and thus attracted to the magnet.
Most serious shooters carry one of these large magnets on their belts, as they are real time savers on pick-up stages. But let’s face is – those magnets can be a pain, picking up steel debris sticking to your car interior or those metal storage cupboards.
Not anymore!
This cover does not completely eliminate the magnetic pull, but it greatly reduces it to where it’s no longer an issue.
The magnetic pull through the cover is still just strong enough to hold a magazine during a Load or Unload procedure, but not strong enough to be trustworthy when running.
So leave the cover on until that stage in which you need your pick-up magnet, at which time you simply pop the cover off before the stage, and drop it in your pocket until after you’re done.
Fast, simple, practical and very striking in appearance!
* Magazine Pouch not included
Many PCC shooters use extended Glock Magazines, often with long base pads added for even more capacity.
To ensure the best possible retention in our Racer and Race Master mag pouches, we are pleased to offer this dedicated extended Glock Side spacer.
Simply assemble this spacer instead of your short one, and allow the bottom of your long mag to extend out the bottom of the pouch body, for a more balanced more secure retention.
The long spacer offers three hole positions in which to place the stopper, giving you the ability to experiment and decide for yourself what the best depth for your magazine is.
NOTE: this spacer is not compatible with the Alpha-X line of pouches. Magazine and Magazine Pouch not inlucded!
The Wide 2" Belt Hanger for Alpha-X Pouches, is a complete fully-assembled belt hanger for the Alpha-X pouches – enabling the user to attach these pouches to a wider belt. The wide bracket and included spacers will accommodate up to a 2” wide belt, and the two ¼” spacers make it easy to use on a 1.75” belt or a 1.5” belt as well.
The hanger is complete, including the steel bracket on the back with the two removeable spacers, and the ball joint for attachment to the Alpha-X pouch body.
Pouch body and pouch-spacers are not included.
The Universal Ghost Hybrid Pouch is supplied with internal retention of the magazine and gives complete carry freedom and flexibility due to the rotating speed clip.
Different types of retention springs are available to ensure the best suited retention for your needs. The cup is also equipped with a system to remove all magazine movement inside the pouch. Thanks to the clip, you can use belts up to 4 cm in width.
Due to popular demand we are now pleased to offer you the DAA Super-Strong magnets, sold separately, for mounting on the DAA Alpha-X / Race Master pouches, or any other type of base you care to use them on.These Zinc plated magnets are incredibly strong, offering approx. 87kg of pull strength. With these magnets, you can slap on that magazine quickly and confidently and know that it will not fall off as you move. The magnets measure almost 50mm in diameter, and are 12mm thick (with their casing).Fitting to an Alpha-X / Race Master Pouch:In the front of the pouch there is a 4.2mm hole, which can be used to attach the magnet to the pouch body. You will need to tap (thread) this hole using an M5 Tap. Do it carefully and slowly as the thread needs to be precise, as there is only a 2.5mm side wall to work with. once done, simply screw the magnet directly onto the front of your leading pouch. We suggest using a little LockTite on it, to keep the screw from opening.Do not worry if the tip of the screw protrudes slightly into the pouch body - the magazine does not reach down far enough to hit it.
Thanks to the smart design, single stack mag. pouch reduces the space used on the belt. You are now able to carry 5 magazines with only the space on your belt for one magazine.
High tensile strength materials designed for professional and competitive use. The internal spring holds the magazine firmly in place. Thanks to the special rotating Speed Clip it is possible to rotate the pouches for a better extraction.
Suitable for every type of belt.
The DAA Single Stack Magnetic Pouch is our latest magnetic pouch design, offering an ultra-compact and ultra-efficient magazine holding system for single stack shooters.It positions the magazine only in the 90 deg “away from the body position” and is an excellent option for shooters who choose to carry their magazines this way, as many single stack shooters do.The DAA Single Stack Magnetic Pouch utilizes two small yet powerful magnets that hold the magazine firmly in place while allowing it to rest inside its supporting track. The track guides the magazine in and out of the pouch and prevents it from accidentally being dislodged. The release achieved from this magnetic pouch is the smoothest of any of our magnetic pouches, partly due to the smaller contact area with the single stack magazines.The belt hanger is the same as that used in the Racer pouches - the same minimalist steel plate design which eliminates separation between your inner and outer belt. The pouch can be adjusted for tilt in very small steps, allowing you to find your preferred angle. Once the correct angle is set and the center screw tightened, the serrations in the connector piece lock up, preventing any possibility of the pouch rotating until the center screw is loosened several turns.
Building on the success of the Magnetic Single Stack Pouch, we are pleased to offer the same configuration in two new models, a 2011 wide body and a CZ/TAN double-stack magazine size.
(Note that the wider CZ TS mags should select the 2011 model!)
Two 20 mm-round magnets hold the magazine firmly inside the pouch track, allowing for secure retention and yet enabling a smooth and effective magazine release. The base on the pouch is the same as used in the Racer line, providing for two height positions and a step rotation adjustment. The thin steel plate at the back of the belt-hanger minimizes separation between the inner and outer belt. Perfect for these pouches, which are often mounted close together on the outer shooting belt. This pouch configuration is ideal when wanting to mount pouches close together and allow easy access to multiple magazines without having to reach too far back.
Available in Black only.
The new Port Charger Universal Ghost 360 comes with two cups (vertical and horizontal) this allows the shooter to choose the location that best suits its characteristics.
The kit includes two different types of retention for the springs (strong and medium). The white screws regulate the intensity and the movement of the charger when it is inserted.
