Select your country
Please select your country
Cart is empty
The RMR Type 2 is designed with a patented housing shape that absorbs impacts and diverts stresses away from the lens to increase durability. It also offers redesigned and upgraded electronics that have been proven to perform when mounted on slide ride pistols and other small arms.
ITEM UNDER pr. nr.: RM02-C-700607 ON CESAR-SHOP.COM, HAS NEW MANUFACTURER pr. nr.: RM02-C-700620.
Compatible with CZ75/97B/TS/2075/SP01 Shadow/Shadow 2 Caliber 9 mm (9x19, 9x21)
Position in the picture: 37
CZ Magazine Catch for CZ 75 / 85 like the SP-01 , standard release.
This is a Debris Catcher for Casefeeder. The Dillon Casefeeder has two holes in the bottom back of the bowl assembly. These holes allow any accumulated spent powder, polishing media or general crud to drain out of the bowl. This debris if left unchecked can fall all over your press or bench top.
RC Tech bag for 2 pistol + 12 Magazines is designed to carry two guns up to 6" inch long barell and has space for 12 magazines.
Soft padded pouches that protect your gun.
Open guns do not fit.
RC Tech Hard Cover Pistol Bag up to 6" barell is designed to sotre and carry pistols with barrel lenght up to 6". This case has hard covers for maximum protection and durability.
Does not fit Open category pistols.
CZ Robin Sebo aluminium base pad with locking plate.
TONI X3D Grip Tanfoglio Stock II Short Larde Frame.
The Q5 Match Steel Frame delivers performance well beyond what you can find in a polymer pistol.
Sport shooters’ dream: Walther Q5 Match
Fits Tamfoglio Extreme LARGE FRAME.
Grip plates are made for use without magwell.
The DAA Case Lube is a result of much testing and experimentation to find the best performing formula. The non-aerosol spray-cap bottle is easy and efficient to use.
DAA PRIMAFILL is a semi-automatic primer-tube filling solution, able to quickly and easily fill both Small and Large primer tubes. It allows you to switch between Small and Large primers instantly, without tools or assembly.
BUL SAS II long magazine 170mm for 9mm - 28rd.
RC-tech brass base for Metalform/CobraMag magazines. Adds weight to your magazine for easy, quick and consistent reloading.We also recommend the RC-tech brass plates, which eases assembly/dissasembly and adds a bit of extra weight.
Combat adjusatable rear sight for 1911 / 2011.
Designed for BUL SAS II pistols with STEEL GRIP. (REAR LOWER EDGE IS NOT BEVELED). Can also fit SAS II pistols with polimer grips.
Flat 20LPI. Made from polymer.
Here's a cool upgrade for current Armanov Case Cauge, an overall Round Lenght checker! It fits perfectly to the new model of the Armanov Case Gauge - the one with an edge on the bottom side.
Torx Scews for grip 1911.
Hex Scews for grip 1911
Hex Scews for grip 1911.
The IDPA PDR PRO-II holster incorporates our latest generation Kydex holster body, as used in the popular PDR PRO-II holster. It is an efficient, fast holster body, available for many popular gun types for both right and left handed shooters.
The PDR-PRO-II holster body does not include the Suede lining that the PDR offers, making it more suitable for competition use, where speed and ease of draw are paramount. Attaching this PDR-PRO-II body to our Belt-Ride Ambidextrous Hanger, makes this holster a perfect choice for IDPA competitors or for general carry and range use. The bare Kydex cannot be beaten for speed, quick release and smooth draw. Tension adjustment is done by turning one, or both Phillips head screws, which are accessible from the outside of the holster body, while worn.
This hanger positions the holster body up close against the body and provides you a solid, yet tilt adjustable holster mount. It can be used with 1.5-2” wide belts and is fully ambidextrous, working equally well for RH or LH holsters. If you are using the belt spacers (most will, as most use a 1.5” belt) you can choose to have those spacers both above, below, or one above and one below the belt as you thread it through. This will provide you some height adjustment.
Available for right or left handed shooters, in Black only.
RC tech RC026 Electronic Shooting Earmuffs amplifie surrounding low level sounds such as footsteps, voices, warning signals to 82dB yet they provides goodhearing protection from high level sounds from shooting. Noise reduction, volume contorl and omni directional sound.
G10 Grips provides a better grip during rapid shooting and in wet conditions. Comes pre-cut to allow ambi safety. Quick and easy installation for all Ultra / Officer size 1911's.
G10 Grips provides a better grip during rapid shooting and in wet conditions. Comes pre-cut to allow ambi safety. Quick and easy installation for all Government \ Commander size 1911's.
G10 Grips provides a better grip during rapid shooting and in wet conditions. Comes pre-cut to allow ambi safety. Quick and easy installation for all Government / Commander size 1911's.
The Dual-Illuminated RMR uses fiber optics and tritium to illuminate the reticle. Fiber optics collect ambient light, automatically adjusting the reticle brightness. In situations with no (or low) light, the tritium illuminates the reticle.
Quick release flattop mount for 1913 Picatinny rails is precision CNC machined from a block of 6061-T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish. Made in the USA.
This kit includes the sealing plate and proper screws needed to mount an RMR®/ on the Glock® MOS slide and the Springfield® OSP pistol. For the SRO™ only the screws in this kit are required for proper mounting.
Get rapid target engagement and long-range precision from the same riflescope—the Trijicon Credo® 1-8x28. A favorite among competitive shooters and tactical users, this is our finest low power variable riflescope. The Credo 1-8x28 gives you fully multi-coated, broadband, anti-reflective glass, a 34mm tube and a 28mm objective lens for improved exit pupil and low light performance.
The Trijicon Miniature Rifle Optic (MRO®) is a reflex-style, sealed sight intended for use on rifles, carbines, and shotguns to provide fast target acquisition. It is designed to be used with both eyes open, providing the operator with maximum situational awareness. The large aperture and tapered light path maximizes the viewing area in such a small optic, allowing for fast target engagement – especially from non-standard shooting positions.
The RMR Type 2 is designed with a patented housing shape that absorbs impacts and diverts stresses away from the lens to increase durability. It also offers redesigned and upgraded electronics that have been proven to perform when mounted on slide ride pistols and other small arms. It’s suitable for military, law enforcement, concealed carry self-defense, target shooting, and hunting application
ITEM UNDER pr. nr.: RM09-C-700742 ON CESAR-SHOP.COM, HAS NEW MANUFACTURER pr. nr.: RM09-C-700757.
Trijicon Specialized Reflex Optic(SRO™)
- 1.0 MOA Adjustable LED red dot is best suited for use on a rifle or target pistol application or in applications where increased accuracy at distance is needed.
- 2.5 MOA Adjustable LED red dot is the most popular reticle size and can be used in a wide variety of pistol and other shooting applications such as target shooting or plinking.
- 5.0 MOA Adjustable LED red dot is best for applications in which speed and recovery of the dot is critical such as in competitive shooting.
Trijicon Bright & Tough Night Sights are three-dot iron sights that increase night-fire shooting accuracy by as much as five times over conventional sights. Equally impressive, they do so with the same speed as instinctive shooting and without the need for batteries. Housed in a metal body and cushioned within silicone rubber, Bright & Tough Night Sights feature a unique shock-resistant design.
The GL05 is not a night sight set, but a steel replacement set for the original plastic sights on Glock pistols. The GL05 features three white dots.
Trijicon scopecoat is a must have accessorie for your Trijicon scope. It protects your scope from dust and scratches while not in use.
Designed specifically for the Trijicon RMR. This lower 1/3 cowitness mount is perfect for mounting the RMR or SRO on any rifle platform with a Picatinny rail. The AC32062 provides a lower 1/3 cowitness with backup iron sights. This means that the RMR/SRO is mounted higher than the iron sights so that it provides a less cluttered field of view. The iron sights are then in the lower 1/3 of your optical window for backup.
The Trijicon RMR®/SRO™ Full Co-Witness Quick Release mount features a Mil-Spec drop test rated 7075-T6 aluminum design, with an easy to use one handed tool less mounting system.This Return to Zero mount boasts a low weight and low profile design, compatible with any Picatinny rail.
The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation.
Behind Trijicon Fiber Sights is years of engineering and manufacturing experience in producing the industry’s leading night sight and fiber illuminated scopes and sights. Featuring similar fiber optic materials used in several Trijicon fiber optic scopes and sights, including the battle-proven ACOG, the Trijicon Fiber Sights are purposely engineered to bring the absolute brightest aiming point while retaining strength and maintaining a refined sight picture.
Short grip is designed to be used with magwell.
SPECIFICATIONS
PACKAGE INCLUDES
The biggest advantage of the pump family is the uninterruptible power supply. In addition to the classic, easily accessible handrail design. Thanks to the newly developed receiver and trigger mechanism, we offer you a user-friendly and incomparable shooting experience.
Derya M compensator is a medium sized compensator for use on Derya's MK-12 shotgun range.
Derya set of aluminum Picatinny adapters for offsetting sights at an angle of 45°. An ideal accessory for mounting a red dot as a secondary optics on a weapon. It allows the use of several sighting devices or other accessories simultaneously on one weapon.
Derya compensator adapter is intended for all users of older models of Derya MK12 (pre 2019) shotguns who want to attach a compensator to their weapon, for greater weapon control with greater accuracy
