€ $
Tax settings
select country
Select brand

Special offers

Browse by category

New
Firearms
Firearm parts
Gear
Reloading & ammunition
Maintenance
Optics & Sights
Demo / Used items
Sale

New items

Newest Items First
24 Per Page
Magload Shot Saver 12g Black
€24.75  
The Shot Saver provides that vital shot to cleanly finish a stage when you run dry, potentially saving your match. It can also be used to give a strategic advantage by actually working it into your stage plan. Lightning fast and reliable, it’s always there to save your last shot. You don’t need to take any special care when loading it; Slide or snap your cartridge in, it will work every time.
In stock
+ −
Magload Reflex Option 3 Loader Black
€28.88  
The most compact and low profile option 3 loader on the market. Designed to stay permanently on the gun without getting in the way when not in use.The Reflex Option 3 Loader presents a cartridge just outside the chamber which can be knocked in right after the buzzer on an empty start. The loader will naturally fold in only protruding 5.5mm, avoiding any snagging whilst quadloading or operating the gun during the rest of the stage.
In stock
+ −
Magload Velcro Belt M
€90.87  
Everyone knows how to use a seat belt, and everyone knows how secure a seat belt is. Quick to fasten and quick to adjust. Avoid the faux pas of a belt coming off in competition by using the MAGLOAD Velcro Competition Belt.
In stock
+ −
Magload Nexus PRO 28
€380.13  
Nexus PRO is a set and forget system which will take any cartridge with an unfired length from 50-67.5mm (most manufacturers will quote the fired cartridge length in their technical date). That means any cartridge, bird, buck or slug that you would use in training or competition will fit in the...
In stock
+ −
C.A.M. Gen2 Handloader for most Pistol 9/40
€28.88  
C.A.M. Gen2 Handloader for all Pistol 9/40
In stock
+ −
GLOCK Factory MINUS Connector for all Generations G17, G19, G26,...
€7.74  

With this MINUS connector you achive the best possible Glock Trigger.

In stock
+ −
ULTIMATE CZ Grips Alu Long
€78.61  
These Ultimate grips are CNC machined from solid brass for added weight. A G10 Insert designed by Eric Grauffel based on the CZ graphic chart is installed for added traction.
Out of stock
Armanov Quick Loader for 100rd Ammo Checker .40S&W
€20.41  

Cover your Armanov Ammo Checker with Quick Loader and fill it up with the rounds. Shake it in a circular motion until most of the rounds fall in the Ammo Checker, then remove the remaining rounds. You can also help it a bit by mixing it with your fingers. We recommend to fill it with more than 100 rounds for better functionality.

In stock
+ −
ARMANOV ​​Aluminium Ring Indexer for Dillon XL650
€54.02  
Introducing our upgraded Dillon Ring Indexer for Dillon XL650 (13677), built with lightweight yet durable aluminium for superior strength and performance. It includes a custom plain bearing made from special IGUS iglide® material, ensuring smooth sliding motion. By extending the indexing surface, the Ring Indexer provides a larger operational area and avoids clashing with the Indexing Cam at the end of the ramp, which usually results in broken parts.
In stock
+ −
ARMANOV Aluminium Ring Indexer For Dillon XL750
€54.02  
Introducing our upgraded Dillon Ring Indexer for Dillon XL750 (75105), built with lightweight yet durable aluminium for superior strength and performance. It includes a custom plain bearing made from special IGUS iglide® material, ensuring smooth sliding motion. By extending the indexing surface, the Ring Indexer provides a larger operational area and avoids clashing with the Indexing Cam at the end of the ramp, which usually results in broken parts.
In stock
+ −
Armanov Wrench for 1'' Die Nut and Powder Bar
€8.12  
The handle may be angled to the ideal degree for tightening those challenging-to-reach nuts. Compatible with 1'' lock ring nuts. The wrench also features a smaller 7/16" cutout for the powder bar bolt to maximize the efficiency of the tool.
In stock
+ −
S&B 300AAC Blackout FMJ 13g/200grn Subsonic 20pcs
€17.21  
Out of stock
Rollsizer DC Compact Electric Rollsizer
€942.62  
The DC Electric Drive Rollsizer is suitable for the low to medium volume reloader. The DC electric rollsizer produces a similar result as the large scale rollsizer but at a lower cost (and processing rate – 1500 Cases per hour vs 6,400 cases per hour). The DC rollsizers require a minimum run in period of 2-6 hours before use but may occasionally need longer time (up to 12 hours). Running them unloaded overnight is usually best.
Out of stock
ET Spare Screw for CZ OR Plate Mount - 2pcs
€4.50  
The Eemann Tech Spare Screw Set for CZ OR Plate Mount - 2 pcs./set includes two spare screws for the Eemann Tech Optics Ready Red Dot Mount for CZ Shadow 2 Optics Ready pistol.
Out of stock
ET Slide Stop with Thumb Rest CZ 75 / SP-01
€75.40  
We are excited to present the  Eemann Tech Thumb Rest Slide Stop for the CZ 75 / CZ 75 SP-01 Shadow  pistols and their models. This is a completely new design integrated with new ergonomics! It is compatible with small, medium and large size hands. Just put your finger on the thumb rest and...
In stock
+ −
ET Competition Firing Pin Spring 3.5 lbs for GLOCK
€4.91  

Reduced power Eemann Tech striker spring for GLOCK with power 3.5lbs

GLOCK Factory firing pin (Silver) spring has power 24N (5.5lbs)

In stock
+ −
ET Competition Magwell for Glock 17 GEN5
€73.76  
Eemann Tech Aluminium Magwell for Glock 17/34/45 Gen5 helps make significantly faster magazine reloads.
Out of stock
ET Competition Striker Springs Pack for Glock
€13.93  
Enhance the performance of your Glock with the EEMANN TECH Striker Springs Pack, meticulously engineered for shooters who demand precision and reliability. This exclusive pack offers a range of striker springs, each designed to cater to your specific shooting requirements, whether for competitive shooting, tactical applications, or personal defense.
In stock
+ −
Winchester Set Of 51 Screwdriver Bits
€26.22  
Winchester Set Of 51 Screwdriver Bits For Gunsmith. Personalized handle (double molded) and magnetic tip to hold the bits in place, in a compact and very practical case.
In stock
+ −
Rollsizer Automatic Decapper Base Unit
€1,357.30  
The Rollsizer.com Decapper will process 380ACP cases up to 308Win. The machine will remove the spent primers up to 3,600 cases per hour (if your casefeeder can keep up) and cases can be processed soiled.  You can wet clean your cases afterwards, then rollsize your cases. This will save you a LOT...
In stock
+ −
Toni system +4rd Base Pad for CZ Shadow
€36.89  

TONY System +4rd Base Pad for CZ Shadow

Out of stock
5.11 DEFENDER Flex Jeans Slim BSC BLUE WASH
€73.73  
40/32

After searching for years for a denim fabric that meets our mission criteria we bring you the Defender-Flex Jean by 5.11 Tactical®. Also available in Straight Fit.

In stock
+ −
5.11 Single Rifle Case 28"
€72.95  
This professional-grade case provides padded protection for a rifle up to 28" in length. Internal rifle-retention straps prevent unwanted shifting during transport.Single-shoulder carry strap and a carry handle combined with the 5.11® signature CenterLine™ design make transporting rifles a breeze. Internal and external MOLLE panels with Gear Set™ compatibility built in. Lockable YKK® zippers and an ID loop for a personalized nametape.
Out of stock
5.11 Mock Neck LS Top Black
€45.08  
XXL
Comfort and function are squarely in focus in our high-performance Mock Neck Long Sleeve Top. It starts with the next-level stretch material made from long-lasting 87-percent polyester and 13-percent elastane—to provide durability, unencumbered movement, and moisture-wicking performance. Add the anti-odor finish and it’s a smart choice for casual wear or sweat-raising tasks. Built for layering and wearing alone, the Mock Neck Long Sleeve Top is ready for any mission.
In stock
+ −
2 3 4 5 6 7 8 9
9 - 23