Select brand

New items

139.30  
The KynSHOT RB5004 “Shorty” Recoil Buffer is designed for AR-10 carbines with a collapsible stock and an AR-15 length (7.0") buffer tube which is common on many AR-10 applications. The RB5004 reduces felt recoil 20-30%, while largely eliminating muzzle flip. The improvement in weapon accuracy – specifically second and third shot accuracy – is even more noticeable as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier's rearward motion and to prevent bolt bounce as a new cartridge is chambered.
In stock
+

139.30  
The KynSHOT RB5000L Hydraulic Recoil Buffer is optimized for use with light loads, including subsonic ammunition and .300 BLK. The RB5000L has seen heavy use with civilian competition shooters, law enforcement personnel, and the United Sates Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered. This model is made lighter and requires less force to cycle than the standard AR-15 KynSHOT Buffer. This is intended for soft cycling or under gassed guns that will not lock back on the last round with the standard carbine hydraulic buffer or heavier buffers. .300 BLK guns running exclusively supersonic ammo may be fine with a standard hydraulic buffer if the bolt cycles firmly and has proper ejection placement.
In stock
+

139.30  
The KynSHOT RB5000HP Recoil Buffer is designed for over gassed AR-15 carbines or "Thumpers" like the .50 Beowulf or .458 SOCOM. The RB5000HP is also designed for CMMG's 9mm radial delayed blowback system.  Please contact us to verify your application. Made using 17-4 stainless steel, the RB5000HP KynSHOT Recoil Buffer AR-15 is a proven system that has seen heavy use with civilian competition shooters, law enforcement personnel and the United States Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered. The RB5000HP KynSHOT Recoil Buffer reduces felt recoil by 20-30%, while largely eliminating muzzle flip.The improvement in weapon accuracy – specifically second and third shot accuracy- is large as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights.

245.08  
The HM3X is an aluminum bodied 3X magnifier designed for use in conjunction with a red dot sight. The HM3X is feature-packed and includes a quick release, ambidextrous, flip-to-side Picatinny rail mount. Holosun includes a spacer with the HM3X that provides compatibility with absolute and lower 1/3 co-witness dot heights for maximum compatibility. The HM3X has a generous 2.75” of eye relief, is IP67 certified water resistant, and includes windage and elevation adjustment for precision zeroing to your optic’s zero. The HM3X also includes a built-in flat driver tool for easy adjustments.

237.66  
HIPERFIRE® is simply unmatched in performance and reliability. We have broken all of the standards in single-stage AR triggers with our HIPERTOUCH® family, and now we have done the same in our new X2S™ family of two-stage triggers. Whether you shoot competitively, train to defend yourself and...

221.27  
HIPERFIRE® is simply unmatched in performance and reliability. We have broken all of the standards in single-stage AR triggers with our HIPERTOUCH® family, and now we have done the same in our new X2S™ family of two-stage triggers. Whether you shoot competitively, train to defend yourself and your family, or you simply want to enjoy shooting out on the range, ensuring your rifle functions properly every time, without fail, is important. Our new two-stage triggers feature the same technology that HIPERFIRE has become known for. Radical Sear Mechanics™, Cam-Over Toggle Engine™, Soft Start Lock-Up™, Tactile Weightless Break™, user adjustable pull weights, mil-grade components, and precision manufacturing processes come together to make one of the most robust two-stage triggers available today. The MOD-1 design has a longer first stage than MOD-2 or MOD-3 for a more defined first stage prep, but shares the same curved bow and Maganese Phosphate coating as the MOD-2 design.
In stock
+

36.89  
In stock
+

118.84  
Set combines short grips designed in a squarish elliptical shape and with aggressive checkering for a perfect grip suitable for all kind of hands (big or small) and magwell, which fully fuse with grips, for better control of the gun while shooting due to a larger contact surface. A large...
In stock
+

34.83 69.67  
In stock
+

6.25 8.93  
In stock
+


55.76  
Glock brass counterweight. ____________________ MORE INFO Weight 100 g / 3,52 oz Material: Brass ____________________ COMPATIBILITY Glock 19 gen 3, Glock 19 gen 4, Glock 19 gen 5, Glock 19X, Glock 45
In stock
+



9.84  
In stock
+




220.49  
In stock
+


103.81 122.13  
The Pocket Pro II measures shot time intervals for personal practice and scoring matches! All the features you want in a user friendly design. Requires one 9 volt alkaline battery for operation. ____________________ FEATURES: Size fits nicely in your hand with the start button on...


1,180.00  
Single action version of the much loved CZ Shadow 2.
In stock
+

13.93  

The Turret Card Wallet is the minimalist card carrier for the ABR lifestyle. Three card pockets and a compact nylon body keeps your cards safe and secure without the bulk of traditional wallets.

In stock
+

12.25  
Big Magnet with mounting bolt. Perfect for use in IPSC or any other sport shooting division. Can easaly hold 2 full mags securely.
In stock
+

69.67  
In stock
+

613.93  

The most essential data for ballistics calculations is projectile speed. A chronograph is the best tool for the job. Whether you’re handloading for the range or building arrows for the hunt, the Xero C1 Pro chronograph provides the speed data you need to hone your craft.


105.74  
The Improved LV10 2.0 Sling Pack is ready for deployment. All of the Duraflex® buckles have been updated for easier use so you can get to your gear without hesitation. We’ve redesigned this pack to give you the most versatility possible by adding a removable holster retention strap, a securing strap to the tablet sleeve, and a quick release to the main crossbody strap. A loop has been attached to the rear CCW “hot pull” compartment to keep it closed but still easy to access. Included are side compression straps and additional grab handles for more carrying versatility. The Flex cuff channel on the back panel makes for a comfortable carry with lots of storage pockets inside and out including quick access to the internal mesh pockets. Bottom webbing straps are designed with an expandable water bottle pocket for your hydration needs. 5.11’s signature CenterLine™ design ensures that this pack is always ready for anything you throw at it.
In stock
+

209.02  
The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The AD-Recon works with scopes with Objective Housings as large as 56 mm. Offered in a variety of ring sizes, the 2" cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.

29.51  
In stock
+

33.61  
In stock
+

22.91  
In stock
+

36.89  
This set includes an AR15 backplate with a QD mount and a Castle nut for mounting your buffer tube.
In stock
+

24.58  
Locking mechanism that disables your glock from unauthorized use.
In stock
+

12.30  

Belt paddle can be used with the GHOST CARBON BELT to obtain better extraction. Also gives better stability of the holster thanks to the rigid higher part.

In stock
+

80.33  
XS

The Ghost Ultimate Vest is made from a Poly Strecth shell which adjusts to every kind of movement giving you unlimited freedom to move without being hindered by fabric.

In stock
+

163.52 327.05  

The Infinity Firearms® Magazine well available for traditional single stack 1911 pattern guns demonstrates that it is possible to build a better mousetrap. This magazine well attaches to the firearm by means of a specially machined mainspring housing. The lower front portion of the mainspring housing is machined to allow a projection from the magazine well to interlock around the mainspring housing retaining pin.

In stock
+

228.93 327.05  

The Infinity Firearms® Magazine well available for traditional single stack 1911 pattern guns demonstrates that it is possible to build a better mousetrap. This magazine well attaches to the firearm by means of a specially machined mainspring housing. The lower front portion of the mainspring housing is machined to allow a projection from the magazine well to interlock around the mainspring housing retaining pin.

In stock
+

736.89  
TheTaurus TX22.22 LR Competition is a self-reloading side-firing pistol, equipped with a flail mechanism, a capacious 16-round magazine and a trigger mechanism with short reset and low resistance. The Competition version uses a thick-walled bull barrel and a base for mounting a collimator sight.

35.98  
In stock
+

393.44  
The GSG-922 pistol in Cal. .22 is a compact version of the popular 1911, with a three-inch barrel and some safety extensions.
Maximum shooting pleasure, very close to the original!

1,139.34  
TURQUA FIRST BOLT ACTION RIFLE OF TURKEY. SUB-MOA accuracy guaranteed 5-shot group at 100 meters. For better accuracy glass bedding feature comes as a standard on every Turqua PT.
In stock
+

389.34  
Triton No. 6i is the most efficient overbarrel silencer in the Triton Numbers range and delivers top class performance even on the more powerful calibers. With the same moderate build length as the Triton No. 5i then Triton No. 6i, is the favorite for high seat hunting and wild boar hunting at night.
In stock
+

303.28  
Are you looking for a damper that is designed in perfect harmony between damping, smoothness, performance and weight?
In that case, we think that Triton No. 4i is the perfect choice. This suppressor is optimized for calibers 6.5×55 and .308 and designed for the mobile hunter who values ​​the best possible balance on the weapon!
In stock
+

286.84  
FRACTO silencer designed for cal. 5.56/.223. The Silencer is designed with a front side exit system that enshures smooth operation.
In stock
+

327.83  
FRACTO silencer designed for cal. 9mm. The Silencer is fited with a recoil booster system that enshures smooth operation of all pistols with free float barrel. It is also designed to utilize a detachable membrane on the front of the supressor for extra silent shooting.

327.83  
FRACTO silencer designed for cal. 9mm. The Silencer is fited with a recoil booster system that enshures smooth operation of all pistols with free float barrel. It is also designed to utilize a detachable membrane on the front of the supressor for extra silent shooting.
In stock
+

95.49  
Traditional flash hider solution compatible with Bore Lock Suppressor systems.
In stock
+
1 2 3 4 5 6 7 8
4 - 18