Select your country here
Please select your country
Panier vide
FOR glock MAGAZINES
NOT FOR MAGWELL USE
3 HOLES FINGER REST Left side Right shooter
Base pad ALU with plate Y3 Tanfoglio LF +1
NOT FOR MAGWELL!
With reserve plate.
Base pad ALU with plate Y2 Tanfoglio SMALL FRAME +1
- The +5/6 Base Pad comes with a +10% stronger spring.
- Overall weight 1.6oz.
- Length, 1 1/2 inch front side, 3/4 inch on back side.
- Will work on all full size double stacked GLOCKs.
- Patented proven push pin design.
- Super easy to attach and detach from the magazine.
- No specialty tools or devices required to disassemble.
- One piece design, no extra parts to possibly lose during disassembly.
- Fits the USPSA 140mm gauge.
- Ideal for full size magazines.
- Holds 20+1 rounds of 40S&W.
- Holds 23+1 rounds of 9mm.
- The added weight helps the magazine drop free easily for faster reloads.
- CNC machined from billet aluminum.
- Hard Anodized.
Taran Tactical Innovations Competition Magazine Well for 2011 provides the ultimate in reloading performance for your pistol. CNCd from Stainless Steal right here in America, our one-piece push pin design offers premium performance without the irritation of a two piece design. Forward ergonomic relief cuts provide comfort, while a rather large underside funnel to help increases the speed and success of quick reloads. 2.2 ounces of stainless steel provides weight for balance.
TTI Firepower PMAG Magazine Extension
- Designed to work with stock spring.
- Overall weight 2.1oz.
- Length, 1 inch.
- Patented, proven push-pin design.
- Easily attaches and detaches from the magazine.
- No specialty tools, devices, or additional springs required for assembly/disassembly, simply pop off the insert at the bottom of the spring and slide on the extension.
- One piece design; no small parts to keep track of.
- Minimal length addition to allow usage while in a prone position.
- Holds 35+1 rounds on the PMAG30.
- Holds 46+1 rounds on the PMAG40.
- The added weight helps the magazine drop free easier for faster reloads.
- Hard anodized.
TTI Firepower Base Pad Kit for GLOCK.
- Overall weight 0.8oz.
- Length, 1/2 inch.
- Works only on high-cap double stacked GLOCK OEM magazines.
- Holds 18+1 rounds of 40S&W.
- Holds 21+1 rounds of 9mm.
The DAA Elbow pads are specifically designed to meet the needs of IPSC/IDPA shooters on the range. What is needed is a lightweight yet durable pad which offers the required protection when going prone, without adding bulk and without compromising the shooting position or making it less comfortable. The DAA Elbow pads deliver just that! The pads themselves are made of high density EVA foam, which offers longer life and better protection. The pads are in the form of small circular disks, which are tightly held together to offer seamless protection, while providing full flexibility and comfort of wear. The sleeves are made of 90% Polyester and 10% Spandex, to offer comfort and excellent fit. They are machine washable. Silicon piping is incorporated at the top and bottom edges of the sleeve, to ensure the elbow protection does not slide up or down while you shoot and move. Included is a set of two pads, black, with DAA logo.Available in two sizes, to fit most.Sizing note: choose M-L if you normally wear a Medium or Large top or choose XL-XXL if your shirt size is XL/XXL or larger.
Laser cut plastic logo inlays for the Alpha-X holster body and hanger. These inlays have 3M tape on their back for easy installation on the holster assembly.
Note that it is possible to remove the color inlays and swap them for a new color when desired. However, the old color inlay may break when removed.
MBX "Mega" PCC 6" Competition Extension Basepad with MBX Custom Spring
Adds Maximum capacity up to 57 rounds
For Factory Glock 9mm and ETS Magazines only.
Includes: - MBX 6" Mega Extension Basepad - MBX 28 Coil Custom Spring
The Next Generation of High Performance Competition Ready Magazines for BUL SAS Styles.
Made from Heat Treated 410 Stainless for Ultimate Durability.
No spacer required for 9mm/.38 magazines.
MBX Complete Tubes were designed to be competition ready with exclusive features to meet the highest demands for today's shooters.
- All 126mm 9mm/.38 magazines hold 20-21 rounds.
- All 126mm .40/10mm magazines hold 18-19 rounds.
- All 141.25mm 9mm/.38 magazines hold 23-24 rounds.
- All 141.25mm .40/10mm magazines hold 20-21 rounds.
- All 171.25mm 9mm/.38 magazines hold 29-30 rounds.
*Our tubes are designed exclusively to work with MBX Basepads, Springs, and Followers. These tubes are not designed to work with other manufacturers components.
The tube is designed to work with the MBX Extreme Follower. This is a wider follower with new features that will allow for maximum reliability and capacity.
Witness holes on rear of tube to indicate round count for all tubes.
Choose between either our 16”and 18'' .223 Wylde or 11.5” 5.56 barrels
12 ga. Low Drag Follower, 12 ga. Low-Drag Follower for Benelli Nova/Super Nova and Vinci/Super Vinci
HARRIS BIPODS
A.R.M.S.® #31™ Aimpoint Micro Mount
Throw Lever® Mount for the Aimpoint T-1 Micro sight. See Spacer section for spacer.
The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The AD-Recon works with scopes with Objective Housings as large as 56mm. The cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
Product Details
The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles featuring true 20-round capacity, constant-curve body, anti-tilt follower, and snap on Impact/Dust Cover.
Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.
The PMAG 30 AK/AKM GEN M3 is a durable, lightweight, high reliability 30-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R, and others.)
It features steel-reinforced locking lugs, removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the performance and military-grade durability you expect from a PMAG.
The MOE Stock – Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.
The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4's that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AR platform. All mounting hardware and a basic grip cap included.
Features
The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.
With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.
With a similar shape to a 'medium' sized MIAD, this AR15/M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.
The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform.
The MOE Trigger Guard (Magpul Original Equipment) is an enhanced polymer drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms but some custom fitting may be required. All mounting hardware included.
TE AR15 GAS TUBE:
PISOL LENGHT,
CARBINE LENGHT,
MID LENGHT,
RIFLE LENGHT
