Select your country
Please select your country
Cart is empty
NOTE:
Is NOT compatible with Magwell
3 HOLES FINGER REST Left side Right shooter
Designed for military and law enforcement use. Built from the best polymer, this holster is extremely resilient and durable.Level 3 retention system. 100% protection of the weapon when holstered.
Compatible with Ghost leg modules.
Designed for military and law enforcement use, the Ghost 5.2 is an evolution of the best selling 2018 Ghost 3 Built from the best polymer, this holster is extremely resilient and durable. Level 3 retention system. 100% protection of the weapon when holstered. In addition to Ghost 3 holsters triggerguard retention, the 5.0 has a loop on top for further safety, when carrying your weapon.
Is NOT compatible with magwell.
COMPATIBLILITY:
CZ (old magazines), Tanfoglio SF & Beretta 92X Performance.
Aftec Extractors End Extractor Malfunctions. Extractor tension is achieved by two springs that push on side of extractor.
The Taran Tactical Innovations GLOCK +5/6 Base Pad works on GLOCK models 17/17L/22/24/34/35. This base pad will add 6 extra rounds in 9mm and 5 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.
Taran Tactical Innovations Competition Magazine Well for 2011 provides the ultimate in reloading performance for your pistol. CNCd from Stainless Steal right here in America, our one-piece push pin design offers premium performance without the irritation of a two piece design. Forward ergonomic relief cuts provide comfort, while a rather large underside funnel to help increases the speed and success of quick reloads. 2.2 ounces of stainless steel provides weight for balance.
This Taran Tactical Innovations .223 PMAG Base Pad works with any .223 30 or 40 round magazine. This TTI base pad will add 5 extra rounds to a PMAG 30 round magazine and extra 6 rounds in a 40 round PMAG magazine. This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI .223 PMAG base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.
The Taran Tactical Innovations GLOCK +3/4 Base Pad works on GLOCK models 17/17L/22/24/34/35. This base pad will add 4 extra rounds in 9mm and 3 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.
Will not work on GLOCK 19
For almost a hundred years, Vihtavuori powders have formed the heart of many of the world’s most renowned cartridges. Reloaders know they can trust in the performance and uniform high quality of Vihtavuori smokeless powders – cartridge after cartridge – to create a perfect product for successful shooting. When choosing our reloading powder you know your ammo is up to the task, even in the toughest conditions. Go ahead, take Vihtavuori and make the perfect shot.
The DAA Elbow pads are specifically designed to meet the needs of IPSC/IDPA shooters on the range. What is needed is a lightweight yet durable pad which offers the required protection when going prone, without adding bulk and without compromising the shooting position or making it less comfortable. The DAA Elbow pads deliver just that! The pads themselves are made of high density EVA foam, which offers longer life and better protection. The pads are in the form of small circular disks, which are tightly held together to offer seamless protection, while providing full flexibility and comfort of wear. The sleeves are made of 90% Polyester and 10% Spandex, to offer comfort and excellent fit. They are machine washable. Silicon piping is incorporated at the top and bottom edges of the sleeve, to ensure the elbow protection does not slide up or down while you shoot and move. Included is a set of two pads, black, with DAA logo.Available in two sizes, to fit most.Sizing note: choose M-L if you normally wear a Medium or Large top or choose XL-XXL if your shirt size is XL/XXL or larger.
Laser cut plastic logo inlays for the Alpha-X holster body and hanger. These inlays have 3M tape on their back for easy installation on the holster assembly.
Note that it is possible to remove the color inlays and swap them for a new color when desired. However, the old color inlay may break when removed.
New generation of high performance magazines for BUL SAS II type. Made of heat treated 410 stainless steel for level of quality and durability. A spacer is not required for 9mm / .38 cartridges.
Choose between either our 16”and 18'' .223 Wylde or 11.5” 5.56 barrels
12 ga. Low Drag Follower, 12 ga. Low-Drag Follower for Benelli Nova/Super Nova and Vinci/Super Vinci
HARRIS BIPODS
A.R.M.S.® #31™ Aimpoint Micro Mount Throw Lever® Mount for the Aimpoint T-1 Micro sight
The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The AD-Recon works with scopes with Objective Housings as large as 56mm. The cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles featuring true 20-round capacity, constant-curve body, anti-tilt follower, and snap on Impact/Dust Cover. Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.
Product Details
The PMAG 30 AK/AKM GEN M3 is a durable, lightweight, high reliability 30-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R, and others.)
It features steel-reinforced locking lugs, removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the performance and military-grade durability you expect from a PMAG.
The MOE Stock – Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.
The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.
With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. With a similar shape to a 'medium' sized MIAD, this AR15 / M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap.
Designed for use with all M-LOK compatible hand guards and forends, our 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.
The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection-molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15 / M16 platform. An elevation adjustment tool is included, but most aftermarket A2 front sight adjustment tools may be used as well.
The MOE Trigger Guard (Magpul Original Equipment) is an enhanced polymer drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms but some custom fitting may be required. All mounting hardware included.
White Label Armory AR15 gas tubes.