Select your country here
Please select your country
Warenkorb ist leer
Government size fully machined flat 20LPI Aluminium mainspring housing , Replaces the classic curved mainspring housing. Helps keep the gun from shifting in your hand during recoil
this MSH has a natural aluminium color finish
(pins and spring are not included )
- Provides better grip
- Fits all standard full size 1911
- Brand new , top quality
FEATURES
DAA Premium Belts are sold as a set, including both the outer and inner belts. However, as most shooters know, an extra inner belt is a handy piece of kit. These inner belts are extremely practical for everyday use and perfect for air travel, as they include no metal and no buckle. Sold separately in Black only, in sizes from 28”-50”.Note: The "Double Alpha Academy" font color on the inner belt is silver.
MBX "Fang" CTR & Hogue Stock Extensions
For installation on the Magpul model CTR, this extends the factory Butt Stock to allow for deeper and more stable contact with the shoulder pocket allowing for greater recoil control and added stability when reloading along with a raise stance when used in conjunction with the MBX off set mount.
9mm AR Enhanced Version
The 9mm Silent Captured Spring is a drop-in component that softens recoil and reduces cycling noise and vibration in your 9mm carbine. The result is a refined rifle that's a pleasure to shoot. Paired with our 9mm bolt assembly, you have the most reliable 9mm operating system available.
The 9mm Enhanced Version provides the same buffering mass as our standard 9mm SCS. At the same time, we've increased overall bolt mass slightly with more room for increased weight if needed. The result is even softer recoil thanks to a further delay in blowback.
The Enhanced Version 9mm SCS is the best option for reliability and durability with hotter ammunition. It's also the best pairing for use with non-JP bolt assemblies where a central mass needs to be removed. Removing this mass reduces overall reliability from the operating system, which can be offset by the addition weight in the SCS.
Package includes spring and instruction sheet.
Features:
GEN 2 AR-15 Silent Captured Spring Builder with Alternative Spring Pack
Standard Version
Includes SCS unit, five alternative weight springs and spacer to allow for installation in both carbine- and rifle-length buffer tubes.
The JPSCS2-15 will not function with older Primary Weapon Systems (PWS) bolt carriers. The design of the carrier will prevent the rifle from cycling.
Recoil Eliminators
Whether you're an practical rifle competitor, a varmint hunter, a member of a special military or police tactical team or just a plinker, sight recovery is the name of the game. Lower the recoil and you reduce muzzle flip, which leads to faster sight recovery and faster follow-up shots. Every compensator operates on this principle, but none can match the classic JP Recoil Eliminator. This design has been with us almost as long as JP has been in business. "Radical performance" was the goal then--it was the 90s, remember--and that still holds today with the Recoil Eliminator still providing the fastest possible sight recovery and the highest level of recoil reduction of any device on the market, including our own line of compensators.
Functional above all else, the brake's broad baffle surfaces redirect the vast majority of muzzle gases out to the sides with each shot. This actually drives the rifle forward during fire, counteracting the rearward recoil impulse for both minimized overall movement and muzzle flip coupled with reduced fatigue from constant fire, particularly with large-bore rifles. The JPRE also shapes these gases so as to spare the shooter from any concussion as well as the annoyance of thrown dust when shooting off a bipod.
A better shooting experience in every way; that's what the Recoil Eliminator delivers. Over two decades of reviews and match wins tell the tale.
Product Details
Created as an evolution of the original MOE 1911 Grip Panels, the 1911 Grip Panels with TSP texture offers the user a more aggressive texture allowing for better control of the weapon in all environments.Constructed of heavy-duty reinforced polymer, the grips have a unique diamond-shaped cross section to prevent twisting in the hand, an aggressive magazine release cut-out, aggressive TSP texture (Trapezoidal Surface Projections) for positive control, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.
Made in U.S.A.
Features
A cool, new, practical way to carry your Grip-Enhancer into action!
Many shooters like to carry their Grip Enhancer of choice on their belts, so they can apply it just before the “Load and make ready” command. And what is needed is a quick and secure carrying solution, which allows you fast access to the Grip Enhancer and a quick return to belt retention. The New DAA Magnetic Grip-Enhancer does just that – and in style!
Two super-strong magnets are fitted into the custom-made silicone belt and bottle attachments, clicking together and locking securely in place. Run, jump or spin – you wont accidentaly dislodge this holder. Yet a moderate tug/rotation motion and it will come away in your hand for quick application.
The DAA Magnetic Grip-Enhancer Holder is a perfect fit for a bottle of Progrip or for the new DAA GRIPZ lotion. (Any bottle of approx. 34-36mm in diameter could be held securely.)
Available in Black, Blue or Red colors.
MOA - Dot Module, For Polymer Sight
his package contains () mag springs, 11 and 13 coils long, designed to fit a ''Grams Format'' follower. They are a replacement spring for any of the Grams ''Follower Kits''.
All of the functional requirements are met while keeping the weight under 6 ounces. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and accepts a new optimized sling configuration. The lightest stock of its kind in the market.
? Slide-on replacement for collapsible butt stock? Angled non-slip rubberized buttpad allows faster presentation, even with body armor? Multiple Sling Slots with single point mounting? Quick Detach Sling mounting point is positioned for optimum usage including ambidextrous shooters? Upper section provides enhanced cheek weld? MilSpec Buffer Tube Spec
Mil Spec size 1.148 diameter receiver extensions (buffer tube)
Weight: 5.8oz
Height: 5.22"
Width: 1.752"
Length: 7.084"
Commercial spec size 1.17 diameter receiver extenstions (buffer tubes)
This easy to install, inexpensive, drop in upgrade is perfect for any AR rifle. CNC machined from a solid piece of 6061-T6 aluminum, the Billet Mag Release Button is larger and easier to manipulate than the Mil-Spec version. A diamond texture face and a blind threaded hole keep the lines clean and give it unique styling.
https://youtu.be/8YDaaNZR-FI
CED has taken the BEST Range Bag on the market today to an entirely new level of design and function! The result is the new CED Deluxe Professional Range Bag! Starting with the famous CED Professional Range bag, we have added 25% more storage capacity to the new Deluxe Range Bag. Two additional zippered pockets have been added to the bag, one on each end. An over-sized ID holder has been incorporated into the top “U” shaped zippered closure, making it easy to locate and identify your bag. Each bag is made of rugged 600D Polyester weather resistant fabric, with strong chrome-plated metal hardware & heavy duty stitching. Finally, the CED Universal Pouch, attached to an accessory D-Ring on the end of the bag, round out the great features that make the CED Deluxe Professional Range Bag, the ultimate Range Bag to own! Quality! Design! Value! No other Range Bag comes close! * Main compartment locks completely with a "U" shaped top zipper design closure * Double headed zippers to provide locking capability * Seven (7) Magazine Holders * Elastic accessory straps added to hold those little "extras" * Holds up to four (4) Pistols securely * Removable Pistol Insert Sleeve * Ammo Brass Bag * Universal Pouch * Five (5) additional Zippered Pockets for magazine storage and small items * ID Tag Holder * Heavy Duty Chrome Hardware with Padded Shoulder Strap * Fully stitched Rubber Foot Pads to keep the bag dry * Overall Bag 54cm L x 28cm H x 36cm W
Comes with mathcing color brass pouch and pistol sleeve.
Overall Bag 54cm L x 28cm H x 36cm W / 21.5" L x 11" H x 14.5" W
Fits Beretta 682, Some 687 models, Silver Hawk, DT10, Some 391 models
These Optima Choke tubes are available in internal and external versions for 12 gauge shotguns. They are longer and slimmer than conventional Mobilchoke tubes. Thanks to the elongated cone they minimize pellet deformation and improve shot patterns. The various versions are fully interchangeable on 12 gauge guns with Optima Bore barrels. These choke tubes are for 12 gauge shotguns with the Optima-Choke system only.
Does not fit Benelli.
Producing the perfect IPSC shooting pants has been a goal of ours at DAA for a long while. We have tried before several times, with varying degrees of success.However now, with the new DAA SHOTAC Pants, we believe we have “hit the nail on the head!”.Our SHOTAC Pant is made of lightweight, tough and durable rip-stop fabric, which provides ample flex and an extremely comfortable fit. The design and material choice allow you a comfortable range of motion, without appearing loose fitting or baggy. These pants do not look or feel like gym/sweat pants – but they provide as much flexibility and comfort as any sportswear!The SHOTAC Pant features include:- A self-adjusting tunnel waistband, with a full 2” range of fit- An extra frontal pocket for that “load and make ready” magazine (or for your cell phone)- Two large rear Velcro pockets- Large, quick access angled side pockets- Wide belt loops & double layered fabric in the belt area for increased comfort while wearing your shooting rig- Double layered knee area, for increased durability- Steel front snap with DAA logo. SHOTAC logo embroidered on back pocket flap- Fade and stain resistant fabric, available in Black or Navy Blue.Size Chart:Small: Waist: 30"-32" Length 32"Medium: Waist: 32"-34" Length 33"Large: Waist: 34"-36" Length 34"X-Large: Waist: 36"-38" Length 34"XX-Large: Waist: 38"-40" Length 34"XXX-Large: Waist: 40"-42" Length 34"
Dillon handgun case gages allow you to check your handgun ammunition to ensure it will fit a minimum sized chamber. Made of stainless steel for long life.
In 2011 we introduce the all aluminum Race Master Magazine Pouches, the first of their kind. Their innovative design is so different from other model pouches, that all who used them were instantly fans.However, their one shortcoming is their relative high price tag... A $60 pouch is not affordable by all, especially when you consider that you need 3 or 4 of them on your belt. So we set out to develop and produce a plastic molded version of this same winning design, and we are proud to introduce the all new DAA Racer Magazine Pouch, the perfect mate for the DAA Racer Holster!The DAA Racer pouches borrow heavily from the Race Master Pouch. In fact, we took the very same body design, modified it to suite plastic mounding requirements, while maintaining the exact same unique “pressure from the back” adjustable holding system that has proven so successful. Interchangeable inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&p mags. A single stack spacer is available as an accessory as well.The pouch is completely ambidextrous, allowing easy mounting for left hand or right had users. And you can even mount the pouch at 90deg away from the body, just as you can in the RM version.
Warren Tactical Series sight design is void of sharp corners, serrations, undercuts, and odd angles because they are distracting!
The patented, curved rear profile, called the "Waive Design" and the radius corners of the rear notch combine to quickly direct the shooter's vision upward toward the front sight and the target / threat.
The Waive Design also allows faster "target to target" transitions. Plus, with the long outer corners of the rear sight removed, the shooter can see more of the target / threat area clearly. Front sight height: 5.5mm (0.215”) Front sight width: 3.2mm (0.125”)
NOTE : without shue, you can choose you insert:
https://cesar-shop.com/product/trigger-shoe
insert for trigger 1911 and 2011
The TTI Base Pad for STI, SV, SPS, & Rescomp Magazine Tubes.
Use the TTI Base Pad with the TTI spring and TTI Follower for maximum capacity.
- Available in 3mm, 4mm, and 7mm.
- 3mm for SV/SPS/Rescomp 140/170mm magazines.
- Rescomp 21rds in 140mm 40S&W
- 23rds in 140mm 38/9mm.
- 29-30rds in 170mm 38/9mm
- Weighs .3 oz
The SAS II Tactical Carry features a Picatinny accessory rail to mount a tactical flashlight or a laser module.
With proven reliability and remarkable performance, the SAS II Tactical Carry gets the job done.
Specifications
For more information and buying options please go to the distributor list.
GHOST THE ONE is the first holster created by Sandro Amadini.
Locking system consists of a polymer locking sphere providing security and speed. The completely adjustable barrel support bar offers support for all barrel lengths. The belt attachment is the same as on the Super Ghost Ultimate and Thunder.
Gauge with flip tray for gauging ammo on size and primer seating with 100 at once and with the help of the flip tray you can put them directly in your MTM 100 cases or Dillon Precision ammo boxes.
If you are serious about shooting, you are probably a reloader. So you are serious about gauging your ammo too. This tool will save you a lot of time, it will gauge 100 cartriges of 9mm Luger (9x19 parabellum) at once and with a twist and a flip you have all your ammunition nice and neat in boxes, ready for the range or storage.
Precision machined from Aluminium, black anodized.
Now also for our friends of the 9x21 IMI caliber.
Belt clip can be used with standard 4 cm IPSC belts
The Dillon RL 550C will produce match-quality ammo for over 160 different rifle and pistol calibers.
These kits fit the RL300, RL450, RL550 series, AT500 and BL 550 machines This kit contains:
To order choose the right caliber. * Indicates that this cartridge requires use of the Extra large Powder Die #21253 sold separately.
MAGWELL for Shadow 2
Speeding up your magazine insertion is one of the things to beat the competition. Also the grip with the Magwell feels beter. About the grips , they indeed need to be the short ones.
Here you find the short grips.
Perfect fitting and durable hybrid holsters made by Ghost International for most guns used in IDPA and IPSC. Available in left and right hand, adjustable to fit snugly. Please notice that some pistol models exist in different version sights. For instance the REX Zero Tactical has higher sights and does not fit the holster for the Standard model .
The SAS II SAW features aggressive slide serration cuts for better slide manipulation.
With its striking finish and cool design, the SAS II SAW includes the features of our Standard line.
#Specifications
Original, smallest, lightest, toughest mini day / night sight for all military, law enforcement and sporting small arms. With over 100,000 delivered to date, Shield’s Mini Sight has a proven track record. Over 15,000 units are in use by the British regular army and Special Forces, as well as US, Australian, New Zealand Special Forces and other NATO forces.
