Select your country here
Please select your country
El carrito esta vacío
The DAA Powder-Spill-Prevention (PSP) Brush is a simple yet efficient reloading accessory that solves a real issue: How to prevent small amounts of powder being spilled out of the case, as the tool head of the progressive reloading press indexes?
This spacer for Dillon case feeder allows you quickly rise your case feeder plate without clutch system disassembly. Just put it on casefeeder and insert plate above spacer. You will get 1/4 inch rise (6,35mm). This can be used for longer pistol cases that turn over. Or short rifle cases such .300 AAC Blackout with Large pistol plate.
CGW’s music wire reduced power firing pin spring. Must be used with CGW reduced power hammer springs HS-15, HS-13, HS-12000, & HS-8500. For use in the Shadow series and 85 metal framed series only
Rolling Handle for XL650 and RL550
Ball bearing rolling handle for effortless reloading.
Included thread lock.
Weights in a 270 grams so you know heavy duty made to last a lifetime and thereafter.
Performance Center guns originate from standard designs or are created from the ground up. From hand-cutting and fitting to fine tuning for precision, these firearms are top performers. Products from the Performance Center are the ultimate expression of old-world craftsmanship blended with modern technology. Features • Removable Compensator • Titanium Cylinder • Jerry Miculek Signature • Chrome Teardrop Hammer • ChromeTrigger with Stop • Cylinder Cut for Moonclips • PC Tuned Action ALL BACKED BY OUR SMITH & WESSON LIFETIME SERVICE POLICY. Availability subject to applicable federal, state and local laws, regulations, and ordinances.
All Stainless Steel Construction, includes a 25rd Magazine.
Works in most 5.56/.223 chambered rifles.
Just swap this drop in conversion with the bolt carrier group from your 5.56/.223 chambered rifle and you will be ready to shoot .22LR. Ships with 25rd 22LR magazine. For best performance use a round style hammer as notched hammers can cause function issues and 36 grain plated nose bullets have proven to be the best choice for function.
Index Cam Bearing Block. Compatible with the current model Dillon Precision XL-650 progressive reloading press. This is a premium upgrade that smooths the action for the index cam and removes the need for grease on the index pawl. It replaces the steel block that causes friction and drag. Included is one aluminum bearing block with a sealed ball bearing.
Made from aircraft grade aluminum. Anodized in Blue color. Made with CNC precision with pride in Europe.
CZ P-09 Pistol Trigger pin, with recess.
Primer chute for spent primers replaces the blue plastic spent primer cup and bracket on the Dillon 650 reloading press. It completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers. Spent primers are routed through clear PVC tubing into plastic bottle which you fix with a holder on a strong mount. No more spent primers on floor.
Primer chute fits your dillon XL650. It is fastend with two bolts (existing). Instalation time about 1-2 minutes. Made form Aluminium. Transparent tube included. Also works great with large primers.
Included:
You may also like Armanov Strong Mounts.
Mark 7® 650 PRO Autodrive
Differentiating Features
Dimensions and Capacity
650 Autodrive Specifics
Original firing pin spare part made by Tanfoglio.
This new Tanfoglio Xtreme Firing Pin has been designed to work in all Tanfoglio pistols. This new firing pin is longer, heavier and has a new redesigned hammer impact surface to increase the reliability of your firearm while using light trigger pulls.
IPSC Production Legal
Powder Baffle is a must have reloading accessory that dramatically increases powder load consistency and accuracy!
When reloading your own ammunition it is common to produce 500 to 1,000 rounds per hour. At this rate your powder reservoir empties pretty fast. The weight of powder in the tube affects how full of a charge your bullets receive. A baffle ensures consistent weight on the powder at the bottom of the reservoir, giving you consistent loads.
This design eliminates direct weight from the powder in the powder tube reservoir to the charge bar allowing the most consistent and accurate flows. Whether the powder reservoir tube is full, half way or almost empty your averageload should be consistent.
Powder Baffle is made from stainless steel.
Fits on Dillon Auto Powder Measure . It only takes a few seconds to drop it down into the bottom of the Dillon powder hopper. The powder hopper is not modified and your Dillon Warranty will not be effected.
The Shell Sorter™ is a simple product designed to reduce the time spent sorting brass by caliber, allowing you to enjoy more time reloading and shooting. The Sorter simply sits on top of a common 5 gallon bucket, with a few shakes your brass is sorted by caliber. The Shell Sorter™ is comprised of three pans designed to sort several common calibers. The three main calibers that most reloaders sort are 45 ACP, 40 S&W, and 9mm. We have labeled the sorters according to those three main calibers. The sorters do sort many more calibers! The fastest way to sort is to stack all three of the pans together with the yellow pan on top, and the black on the bottom, in that way all your brass is sorted at the same time. If you sort before tumbling as is recommended, most shells that are inside of each other will come apart with the shaking and are sorted correctly. However, if you tumble first, those are likely to jam together with small bits of media, and sometimes those require pliers. The sorters can also take the place of your media sifter. Just tumble, pour your brass into the appropriate sorter(s), shake a bit, your media is in the bucket, and your brass is ready for the next step. You can use this on the range so that you only bring home brass in the calibers that you reload. The Shell Sorter™ is made of ABS, a very strong plastic which will give a lifetime of service. We placed a sorter underneath a car tire, and it didn't break or distort! In fact, it still worked! Always wear gloves and a dust mask when working with used brass because of the levels of lead dust present.
Double head with brass, nylon, rubber and steel heads.
Custom designed for range use, this value packed double-head hammer will cover all your pistol repair needs. The hammer’s compact and light weight size make it an ideal handy addition to any range bag or work bench.
Set of pins, plungers and 2 springs for your 1911 or 2011 pistol
sear pin, ejector pin, barrellink pin, mainspring housing pin, hammer strut pin, sear pin, safety plunger, slide stop plunger, housingpin retainer, mainspring cup, mainspring cup pin, plunger spring and main (hammer) spring.
Recoil guide CZ
Hammer for 1911 and 2011 models
CHARGING HANDLE GLOCK
Scope mount inverted connection C-MORE Toni systems for Glock
Cajun Gun Work’s exclusive floating trigger pin. Can easily be installed and removed an unlimited number of times in minutes! Now made from heat treated S-7 tool steel and hardened to RC-50. This pin is so durable, CGW guarantees it with a Lifetime warranty! Includes installation slave pin. Fits all metal framed 75 CZ’s, Shadow, SP-01, P-01, PCR, 97, RAMI, etc. Does not fit Tactical Sport.
Mounts directly to Strong Mount. Fits the Square Deal, RL550 series and XL650 strong mounts. For 1050 machines use #22215. You must have a strongmount in order to use this bullet tray.
The WM25 offset mount securely attaches your light to Picatinny and Weaver rails. It is lightweight and constructed from precision machined aluminum with an anodized black matte finish. The WM25 is an economical and effective way to mount any 1 inch flashlight on your weapon.
The Omni-Dok is an intelligent, two-bay charging system designed to safely charge the most common rechargeable batteries used in flashlights, cameras, toys, remotes, small appliances, and more. Because each bay charges through an independent system, the Omni-Dok can charge two completely difference types of batteries at once by automatically identifying the type of battery and charging mode required. Power status indicator bars will also monitor the individual charging level of both batteries so you know exactly when each has reached a full charge. An automatic shut-off at eight hours conserves energy consumption without having to unplug the unit.
SPECIFICATIONS:
WARRANTY:
Rechargeable batteries are warranted for one year from the date of purchase.
CR123A 3V 1600mAh Lithium battery
The newest compact addition for a pistol carbine conversion kit The Micro RONI® is the newest compact addition for a pistol carbine conversion kit. The lightweight and sturdy platform for various Glocks and pistols are made of aluminum with a polymer body. The Micro RONI® features a folding stock for a sturdier position. - No pistol disassembly required – Just place pistol into the kit and lock - Equipped with a long top Picatinny rail, allowing a combination of sight, magnifier, and/or night vision - Provides two extra side Picatinny rails on both right and left for mounting additional accessories - Ambidextrous, easy and fast handling - Ambidextrous trigger-guard safety - Features a right-folding stock for easy concealment and carry - Right and left serrated thumb-rests for better control on recoil and muzzle-rise* (Not Included) - Front extra magazine carrier for fast reload - Front integral tactical light (Not Included) - Front and rear flip-up sight (Not Incldued) - Fits only Glock gen’ 3+4 (with bottom picatinny rail), including compensated models (17, 22, 31 OR 19, 23, 32)* Made Of: Poly+Alum For Glock Weight (ounce(s)):1587g, 56oz MEASURMENTS Width Max: 63,5mm, 2.5in Height Max: 190,5mm, 5.7in Length Max: 348mm, 13.7in Not compatible with Glock 17 Generation 1 & 2 and Glock 19!
