Select your country here
Please select your country
Корзина пуста
The new internal holster Inside ‘’S’’ permits you to carry the weapon inside occupying less space; and guarantees an easier way of attaching a holster to the belt.
Material is the same as the one of its older version INSIDE.
CASE-GARD™ Rifle Ammo Wallets
Hunters, as well as police snipers will appreciate being able to remove bullets quickly and quietly from their jacket or shirt pocket using these 9 round ammo wallets. These boxes hold your ammo securely and also provide tip protection. They come with a textured finish and a MTM 10-year guarantee. They come in 2 sizes small and large.
Small , 17 Fireball,17 / 221 / 222 / 223 Rem, 204 Ruger, 219 Donaldson Wasp, 22BR, 22 PPC, 22 Sav. HP, 220 Rus., 222 Rem. Mag., 22-250, 223 Rem. HP, 224 Wby. Mag., 303 Sav., 30-30 Win., 32-40 Win., 32 Win S. L., 32 Win. Spl., 351 WSL, 6x47, 6mm BR-DX, 6mm Norma BR, 6mm PPC USA, 7.62x39 Rus.
Large, 220 Swift, 243 / 270 / 308 / 348 Win., 250 / 300 Sav., 257 Roberts, 257 / 300 / 340 / 7mm Wby. Mag., 264 / 300 / 330 / 338 Win. Mag., 25-06 / 280 / 284 / 35 / 6mm / 7mm-08 Rem., 300 / 375 H&H Mag., 30-06 Spr., 303 Brit., 30-40 Krag., 308 Marlin Exp., 308 Norma Mag., 333 Jeffery, 35 Whelen, 40-60 Marlin, 40-70 Sharps (Straight), 410 Shotshell’s, 44-40 Win., 445 Super Mag, 45-70 Govt & WCF, 6.5 / 7mm Rem. Mag., 6.5 Creedmoor, 6.5x50 Jap. Arisaka, 6.5x52 Italian, 6.5x54mm Mann-Schone, 6.5x55mm Swedish, 7x57 Mauser, 7x61 Sharpe 7 Hart, 7.5x55 Swiss, 7.65x53 Mauser, 7mm BR, 8mm-06
Slide the module between the Molle straps and use the same holster you are familiar with on your OPS vest.
This set of Ghost glasses has a matte black, high sitting 3-point design frame with straight legs. The rubber legs keep their grip even when they are wet from sweat. You will never lose these glasses during running. 3-point design touches the face only on 3 points creating a very comfortable wear.
We created a set which combines the best coverage of your eyes, extreme high level of protection and very comfortable to wear. Each set comes with 4 lenses. Clear , yellow , blue-ish grey reflective front and a fantastic polarized lens which iliminates glare. All made from parallax free 1.4 mm thick Poly Carbonate.
Ideal for sporting use, this has been made lighter than the standard A2 and it is therefore compatible with our lightweight carriers and spring A2.
It can be used only with fixed stocks.
Weight: 85 g
Sport rifle magazine pouch L is complete with rotating clasp for adjusting the angle and a low-ride belt attachment. This guarantees a very fast and comfortable draw. These pouches are ideal for longer magazines and seated or kneeling shooting positions. Adjustable retention by four screws on both sides of the pouch hold the magazine firmly in place. Available for AR15 or AK47.
The Universal Ghost Hybrid Pouch is supplied with internal retention of the magazine and gives complete carry freedom and flexibility due to the rotating speed clip.
Different types of retention springs are available to ensure the best suited retention for your needs. The cup is also equipped with a system to remove all magazine movement inside the pouch. Thanks to the clip, you can use belts up to 4 cm in width.
A recoil reducer designed to eliminate vibration and annoying noise that characterizes the operation of AR platforms.
The package includes the spring system and thickness body for potential use of fixed calcium.
The Magnetic IPSC magazine was designed with the IPSC shooter in mind. The Magnetic system is available in three versions for unlimited choice of carry options. For stationary matches you can use the MAG1, for running matches with higher risk of losing a magazine you can use the MAG 2, that is a magnetic pouch with wings and rotating speedclip. The MAG3 and MAG3D combines the IPSC pouch with the magnetic system to quickly add a spare magazine without losing another inch of belt space.
Thanks to the smart design, single stack mag. pouch reduces the space used on the belt. You are now able to carry 5 magazines with only the space on your belt for one magazine.
High tensile strength materials designed for professional and competitive use. The internal spring holds the magazine firmly in place. Thanks to the special rotating Speed Clip it is possible to rotate the pouches for a better extraction.
Suitable for every type of belt.
Bolt catch oversized both internally and externally. Visible prolonged internal flap that allows adaptability with all magazines. The knurled outer surface is great for improving its grip.
It is made of high quality steel and subjected to heat treatments to make the contact surfaces resistant and unaltered over time.
Metalform 9mm for 10 rounds with metal mechanism and nylon base pads, with a large fixing fracture for easy magazine removal.
Lee Replacement decapping pin for Decapping Die (#90292)
When you need to pull some bullets for whatever reason, and impact style tool is the easiest method. Just one stern “whack” and the bullet is separated from the brass. It is that easy. Three different collets are included allowing you to pull bullets from just about every caliber rimmed or rimless. Versatility makes this bullet puller the only one to have.
Our carrier “Light competition” has been designed to be as light as possible, weighing only 182 gr with gas key assembled; it is ideal for sport activities, combined with ADC Adjustable Gas Block it allows the carbine to have a good yield.
Completely made of stainless steel, it is finished with anti-friction treatments that increase the fluidity in operation.
Even the aesthetics have not been neglected, the side and front grooves give a sinuous shape and sense of lightness.
Firing Pin Spring for Glock.
Trigger Spring for Glock Lightweight competition
The 3M PELTOR ProTac III hearing protector helps protect against harmful noise, whilst allowing ambient sounds to be heard at a level below 82dB. It increases your ability to communicate with nearby colleagues, as well as hearing warning signals, approaching vehicles, or sounds in machines and processes.
Noise reduction 26 decibel.
Pimp your AR !!! Toni System is the adress to look for functionality, quality and design.
To personalize your AR you can choose different colors.
To enhance and speed up the handling of your AR, look no further, TONI System has the right parts.
Safety sel. ambi 90°-45°
Safety selector ambi that offers the option of being installed at 90 degrees or 45 degrees.
It has a central screw that allows safe adjustment, making it perfectly operational both assembled on the trigger kit ULTRA and on all other trigger group on the market.
The package includes a short external lever and a reversible standard one that allow ambidextrous use.
The aesthetic peculiarity is the shape of the ace of spades, the ADC brand.
To pesonalize your AR you can choose different colors
Toni Systems Oversized Magazine button. No fumblin but a firm button for your Magazine.
Magwell for the 2011 STANDARD pistol.
LOS copper plated bullets consist of compact lead cores and special thick plating. This gives bullets maximum protection from the lead, making them highly appropriate for shooting in indoor shooting ranges. Bullets are additionally calibrated to achieve the highest possible performance.
To keep your machine running also when you had a little accident.
Spare parts kit specifically for your Super 1050 machine.
Don't risk downtime waiting for a replacement parts!
Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.
Note : The aerosol inside makes it impossible to ship this by air.
Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.Note : The aerosol inside makes it impossible to ship this by air.
Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included.
This item does not check the accuracy of the powder charge, it checks for double-charges or no-charges only.
Dillon powder body with drop tube #22273
This mount is for both the RL 550 series presses as well as the XL650. Mount height = 8 1/2" or 21,6 centimeters.
Raises your press above the work bench level and adds stability due to its larger footprint.
Recommended by lots of reloaders.
Dillon's CV-2001 Vibratory Case Cleaner is the largest in the industry. Its 12-1/2 quart bowl capacity will allow you to polish up to 1,300 .38/.357 or 550 .30-06 cases per hour. Not only is our capacity greater, but our motor is larger in horse power, internally cooled, thermally protected, and turns on precision ball bearings. This is no "hobby" machine! The bowl and base are constructed of 7/32" thick injection molded high-strength polypropylene which is impact and abrasion resistant.
Note: Tumblers are not designed for tumbling loaded ammunition.
