Select your country here
Please select your country
El carrito esta vacío
LOS copper plated bullets consist of compact lead cores and special thick plating. This gives bullets maximum protection from the lead, making them highly appropriate for shooting in indoor shooting ranges. Bullets are additionally calibrated to achieve the highest possible performance.
To keep your machine running also when you had a little accident.
Spare parts kit specifically for your Super 1050 machine.
Don't risk downtime waiting for a replacement parts!
Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.
Note : The aerosol inside makes it impossible to ship this by air.
Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.Note : The aerosol inside makes it impossible to ship this by air.
Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included.
This item does not check the accuracy of the powder charge, it checks for double-charges or no-charges only.
Dillon powder body with drop tube #22273
This mount is for both the RL 550 series presses as well as the XL650. Mount height = 8 1/2" or 21,6 centimeters.
Raises your press above the work bench level and adds stability due to its larger footprint.
Recommended by lots of reloaders.
Dillon's CV-2001 Vibratory Case Cleaner is the largest in the industry. Its 12-1/2 quart bowl capacity will allow you to polish up to 1,300 .38/.357 or 550 .30-06 cases per hour. Not only is our capacity greater, but our motor is larger in horse power, internally cooled, thermally protected, and turns on precision ball bearings. This is no "hobby" machine! The bowl and base are constructed of 7/32" thick injection molded high-strength polypropylene which is impact and abrasion resistant.
Note: Tumblers are not designed for tumbling loaded ammunition.
Caliber conversion is not included.
Super 1050 Quick Change Kits allows you to leave your dies and powder charge set up and dedicated to a specific cartridge for faster, easier caliber changes. Caliber changes require a caliber conversion kit (sold separately) in the caliber you want to add to your Dillon Super 1050.
This set consists of one Super 1050 powder measure nr. 20421 and one Super 1050 Toolhead nr. 20420.
Be aware that the ratchet does not interchange between the Super 1050 and the RL1050 due to differences in length. If you have an RL1050, order toolhead #19399.
Spare parts kit specifically for your XL650 machine.
Small Pistol .32, .380, 9mm, .38 Super, .30 Carbine
Large Pistol .40 S&W, 10 mm, .38 Special and larger, 7.62 x 39
Small Rifle .204 Ruger, .222, .223 Remington
Large Rifle .22-250 and larger
The new CMMG MkGs Guard T is an AR-15 style semi automatic rifle designed using CMMG's patent pending radial delayed blowback operating system. This system easily allows for the use of the 9mm cartridge while reducing the overall weight of the platform along with the felt recoil. Additionally the using features a patent pending dual-pinned fully machined bolt catch linkage which makes the rifle easy to operate as well as intuitive. One of the biggest benefits of the Guard platform is that it feeds from factory GLOCK magazines. This allows you to tap into the supply of GLOCK magazines you may already have without having to shell out additional money. Finally the Guard is built from a Billet Upper Receiver and a Forged Lower Receiver. The aluminum is high quality 7075-T6 and will serve you well for years to come.Specifications and Features:CMMG MkGs Guard T AR-15 Style Semi Auto Rifle 99AE631Radial Delayed Blowback Operation9mm Luger16.1" Medium Taper 4140 Chrome-Moly BarrelSalt Bath Nitride Finish1:10" Twist RateMuzzle Threaded 1/2x28A2 Flash Hider Muzzle DeviceBillet 7075-T6 Aluminum Lower ReceiverForged 7075-T6 Aluminum Upper ReceiverCMMG RKM11 KeyMod Free Float Hand GuardCMMG Single Stage Mil-Spec TriggerA2 Style Pistol GripM4 Buttstock6 Position Mil-Spec Receiver ExtensionGLOCK 9mm Luger 33 Round Magazine GLOCK Magazine CompatibleOverall Length Collapsed 32.5"Overall Weight 6lbsMatte Black Finish
CM-2000 Case/Media Separator is large, 25,4 x 35,5 cm and will hold more than 1,600 .38 Special cases. It sits on a large media collection tub that measures 45,7 x 55,9 cm. The tub keeps the mess off the floor and bench. It's fast -- so fast it will remove media from 1500 rounds of .223 brass in a matter of seconds.
Muy alta calidad
compre más de 10 piezas y obtenga un 10% de descuento
The Elite handguard is 100% made in Italy, CNC machined, it was designed primarily to maximize the particular design that features the ADC carbines, allowing compatibility with other AR platforms.
It is characterized by an octagonal profile, free-float, with four frontal picatinny.
It is distinguished by other models for futuristic design and for the upper interrupted picatinny.
It is important to emphasize the use of the modern M-LOK system.
Material: 6082 aluminum, hard black anodizing
Available lengths: 9” – 12” – 14” – 15,5”
Weight (without barrel nut): 224 gr – 248 gr – 272 gr – 288 gr
Width: 41mm
Inside Diameter: 35mm
Dillon's accessory handle gives your reloader an entirely new "feel." A roller handle reduces operator fatigue during long reloading sessions and makes primer seating easier. Fits the RL550 and XL650 loaders.
The Competition handguard is 100% made in Italy, CNC machined, it was designed specifically for sports activities; for this purpose it has been heavily lightened by making millings which optimize its grip and allow the regulation of our gas block ADJ. from the outside.
Round, free-float profile, it has double barrel nut, both inside and outside.
The holes positioned throughout its length allow mounting from outside the picatinny sections every 22.5 °.
Available lengths: 15,5”
Weight (without barrel nut): 208 gr
Width: 50 mm
Mistakes happen, so be prepared. Our hammer-style Bullet Puller quickly removes your bullets without damaging the bullet or the case. The rubberized grip is easy on your hands and we have also added a rubber insert inside the hammer tip to make it easy on your bullets. Easy and convenient to use whether checking an occasional reload or pulling hundreds of bullets.
This Hammer Set comes with 4 collets.
LIFETIME WARRANTY. MADE IN THE USA.
Collet information: Pistol RifleBlack (X-Small) - .25 ACP Small Rifle CalibersBlue (Small) - .32 - .380 17 Rem - 223 RemGreen (Large) - 9mm - 10mm 6mm - 8mm Red (X-Large) - .41 - .45 ACP Belted Mags - 45-70
Extra powder dies allow you to move your powder measure from toolhead to toolhead without changing the "belling" adjustment.Toolhead not included. These are for the RL550, XL650,and RL450 equipped with the automatic powder system
The Dillon Square Deal B is a compact reloading machine designed to load the common straight walled handgun and carbine cartridges from 32 S&W Long through 45 Colt.
The Square Deal B, which is our most compact machine, has an automatically indexed shellplate and is intended to produce moderate quantities of match-quality handgun ammunition for the user who does not have a need to load bottle-necked cartridges. Dies are included and are factory adjusted to reduce your set up time.
Reloading with Dillon’s Square Deal B is Easy as 1-2-3! Most shooters realize that reloading is the most economical way to enjoy their sport, but many shooters are unaware of just how simple it is to reload. In fact Dillon’s Square Deal B is one of the easiest progressive loaders in the world to learn to operate. How can we make that statement? Simple. Since all of the reloading steps are performed with a stroke of the handle, there is less to remember (or forget) than with an old-fashioned single-station press.
The Competition handguard is 100% made in Italy, CNC machined, it was designed specifically for sports activities; for this purpose it has been heavily lightened by making millings which optimize its grip and allow the regulation of our gas block ADJ, from the outside.
M-Lok, Free-float profile, it has double barrel nut, both inside and outside.
The holes positioned throughout its length allow mounting from outside the picatinny sections
Available lengths: 15”
Weight (without barrel nut): 240 gr
Dillon's CV-750 Vibratory Case Cleaner is perfect for reloaders with limited space. CV-750 bowl is 12" across, the unit is 12" tall. Capacity of 500 pieces of 45ACP or 38/357, or about 200 pieces of 30-06 brass. All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase. This unit is designed for dry media only. Use of water or wet media will void the warranty.
Note: Tumblers are not designed for tumbling loaded ammunition
Includes: 1 550 Brass Tip Set Screw, 1 550 Index Ball, 1 550 Index Ball Spring, 1 Seating Punch (Small), 1 Seating Punch (Large), 1 550 Primer Cup Spring, 1 550 Slide Return Spring, 1 Cartridge Spring, 1 Bellcrank Cube, 2 Magazine Orifices (small), 2 Magazine Orifices (large), 2 Pickup Tube (Large, Green tips), 2 Pickup Tubes (Small, Yellow Tips), 2 pickup tube retaining Clips, 1 Failsafe Shoulder Washer, 1 Tinnerman Insert, 4 Locator Pins(one each #s 1,2,3,4), 1 primer cup (small), 1 primer cup (large), 1 ejector wire, 1 toolhead pin, 1 dispensing tip (Large), 1 dispensing tip (Small), spacer bar retaining plug
Dimensions: Main compartment - 12.5" X 7" X 10" Tall Main compartment has two internal flat pockets, 5.5" Wide X 7.5" Tall The top flap has two mesh pockets End Pockets - 8.5" Tall X 6.5" Wide X 2"Deep Front Pocket - 9" tall X 6" Wide X 2" Deep 2 Round front pouches, 3" Diameter, for water bottles or empty brass The back has a double bellows pocket with a velcro divider that measures 7" Tall X 9" Wide
Sizing/Depriming Die Our sizing/depriming dies feature a unique "floating decap assembly" with a snap spring that throws the spent primer off the pin and eliminates the problem of primer "draw back" that often occurs when decapping military brass. The primary feature of Dillon's size die design the long, tapered carbide ring with a radiused opening remains unchanged. That radiused opening, and its importance to progressive reloading, is one of the reasons why our seat and crimp dies are better. We found a way of manufacturing these dies that has enabled us to make the lead-in radius even bigger! The bigger radius makes progressive loading with our equipment even smoother but that's still only a part of the story.
Spectrum
Compensator ideal for tactical use, whose maximum yield is with short barrel carbines.
The side windows, specially tapered to dampen the recoil and at the same time break the flame. The upper holes, on the other hand, give the weapon stability and neutrality, minimizing the nose-up and reducing the twist. Lastly, the four frontal tips allow this compensator to be used as a means of breaking.
It is made of high quality steel and subjected to high-hardness heat treatments with the double end to make the non-stick surface to the gunpowder residues on one side and robust on the other.
Thread 1/2×28
The ultimate in convenience for keeping your reloading bench clean and uncluttered. You will find in an instant what you need to make the switch from one to another caliber.
This stand is for the RL550 Series and XL650 machines only.
