Select your country here
Please select your country
Warenkorb ist leer
Simply the fastest and most convenient way to clean your gun barrel, be it a pistol, a rifle or a shotgun. Simply drop the weighted end down the barrel, from breach to muzzle and pull through. Do so with or without solvent, as best suites you needs. One pull runs a copper bristle brush as well as a wide long swab down the length of your barrel. You do not even have to disassemble the weapon to clean! Can be complete in seconds, and your barrel will be ready for another session on the range or in the field.
The Magnetic IPSC magazine was designed with the IPSC shooter in mind. The Magnetic system is available in three versions for unlimited choice of carry options. For stationary matches you can use the MAG1, for running matches with higher risk of losing a magazine you can use the MAG 2. The MAG3 and MAG3D (magnetic pouch double magnet) combines the IPSC pouch with the magnetic system to quickly add a spare magazine without losing another inch of belt space.
M5 PLUS BLACK
CALIBRE : 223Rem
BARREL LENGHT : 16”
TWIST RATE : 1/9”
UPPER : Machined from MIL SPEC forged- AL7075T6 Hard black anodized M4 Feed ramps,
LOWER : Machined from MIL SPEC forged- AL7075T6 Hard black anodized
BARREL : Hammer Forged Nitrited – Heavy profile – thread : 1/2 X 28 with A2 flash hider.
GAS SYSTEM : Direct gas impingement with gas block low profile
BOLT CARRIER GROUP: Prismatic heavy phosphate
HANDGUARD: Octagonal free float slim with full size picatinny – CNC machined – M-LOK System – 12”
TRIGGER: MIL SPEC
STOCK : MIL SPEC collapsible
The new Port Charger Universal Ghost 360 comes with two cups (vertical and horizontal) this allows the shooter to choose the location that best suits its characteristics.
The kit includes two different types of retention for the springs (strong and medium). The white screws regulate the intensity and the movement of the charger when it is inserted.
Xtreme No Rust is the solution to protect and lubricate surfaces to prevent from rust. This spray when used in combination with Xtreme Gun Cleaner is the perfect combination and base for lubing with Xtreme Ceramic Gun Lube.
After cleaning the gun with Xtreme Gun Cleaner you spray a fine mist of Xtreme No Rust over the gun. This will set as a protective film over the parts of your gun. With a clean cloth wipe off the axcess.
After this step you are now ready for the next level. Greasing the gun on its critical parts with Xtreme Ceramic Gun Lube.
In 400ml spray.
Flammable: Cannot ship by air or outside the EU. Due to air shipping regulations some solvents and CLP liquids cannot be shipped internationally.
Grips for the CZ Shadow 2 and SP-01 models, long version with checkering in Thick (79 grams) which adds 4 mm in thickness to the gun compared to Thin grips (49 grams).
Colored Aluminium grips for CZ Shadow 2 and SP-01 models in long version with checkering that is extremely grippy.
The checkering is CNC cut in the surface and has straight angles and is circular ( 360° directional grip) , therefore has more grip than any other on the market.
Matching the color is difficult on the picture due to no uniformity in devices so please look for the color on the group picture for closest resemblance of the original color.
Long grips are for guns that do NOT have a Magazine funnel fitted
Short grips are for guns that have a Magazine funnel fitted.
Completely cut from Aluminium on CNC machines.
Color is anodized.
Brass base pads for CZ Tactical Sport Magazines +1
Powder measure knob for the Dillon Powder thrower with click for easy adjustment.
Unlike other competitors, this knob is laser etched with 50 graduations giving the user reference points when adjusting. Two steel spring loaded balls generate smooth and repetable clicks. Easy to setup between multiple loads or even calibres, very precise 50 clicks per turn. Testing on pistol powders one click increments is about 0.015 grains. This is a very precise setting.
Simple installment and a tremendous help for if you are using different loads with visual scale.
The Dillon Factory screw requires a wrench when adjusting the amount of powder to dispense in your powder thrower. This knob is labeled with graduations for orientation and easily allows the user to hand adjust the powder dispenser without the need for tools. Works on Dillon 1050, 650,550, SDB and 900 presses.
Both parts are made from aircraft grade aluminum - anodized black color
1 x laser etched knob assembly consisting of one knob frame and one adjusting knob
1 x allen wrench for the grub-screws to fasten
Dillon Powder Bar shown only for reference and is NOT included.
Delicate Gun Cleaner, does not dry out your gun like some not dedicated products like brake-cleaner etc.
Should be used in combination with Xtreme No Rust and the specialy developed for each type of gun Xtreme Ceramic Gun Lube.
Simple to use. Take your pistol apart and just spray on the dirty parts and let it work in to remove the grease and dirt, spray some more to wash it off, let the gun dry, after a short time the dry gun can be sprayed with a mist of Xtreme No Rust, wipe off excess. Now you are ready for the next level, lubing your gun with the Xtreme Ceramic Gun Lube.
500 ml spray
Our Standard Division pistols come with all the bells and whistles that any IPSC Standard / USPSA Limited shooter needs. The Standard line is true to our mantra "ready to race out of the box", giving you all the features you'll need for competitive shooting from the get go. While it’s called the Standard, it's far from being so; every pistol is hand-built for accuracy and speed with the highest attention to detail and fitted by our master gunsmiths.
Each pistol comes with a full dust cover giving you the best balance between weight, stability and accuracy.
#Specifications
With a quick change assembly and a caliber conversion kit (sold separately), you can convert your RL 550 Series press from one caliber to another in less than a minute.
Includes:
Hammer - Single Action and Double Action
HAMMER SA DA for models CZ 75, CZ 75 Compact, CZ 85, CZ 97, CZ SP-01
The installation must be done by an experienced gunsmith.
BARREL LENGHT : 14,5”
Gauge with flip tray for gauging ammo on size and primer seating with 100 at once and with the help of the flip tray you can put them directly in your MTM 100 cases or Dillon Precision ammo boxes.
If you are serious about shooting, you are probably a reloader. So you are serious about gauging your ammo too. This tool will save you a lot of time, it will gauge 100 cartriges of 9mm Luger (9x19 parabellum) at once and with a twist and a flip you have all your ammunition nice and neat in boxes, ready for the range or storage.
Precision machined from Aluminium, black anodized.
Now also for our friends of the 9x21 IMI caliber.
The Dillon RL550C is the most versatile reloading machine in the Dillon Precision Products line. It will accommodate the widest variety of cartridges from 32 ACP up to 338 Lapua, 416 Rigby, and 460 Weatherby.
The RL550 has a manually indexed shellplate making it easier to master the various steps of reloading. Manual indexing also gives the operator greater control over each individual step in the loading process. Caliber changes are simple and require fewer parts than other machines which makes it less expensive to convert to another cartridge.
Reloading with Dillon’s RL 550 is Easy as 1-2-3! Most shooters realize that reloading is the most economical way to enjoy their sport, but many shooters are unaware of just how simple it is to reload. In fact, Dillon’s RL 550C is the easiest progressive loader in the world to learn to reload with. How can we make that statement? Simple. Since all of the reloading steps are performed with a stroke of the handle, there is less to remember (or forget) than with an old-fashioned single-station press.
No dies are included with the RL550!
BUL Blades with G10 Grip
420 Stainless Steel
-Full
-Modyfied
-Cylinder
Works also for Benelli Nova/Supernova
TTI Ultimate Fiber Optic Sights Set for Glock
*COMPLETE SIGHT SET WILL COME WITH BOTH RED & GREEN FIBER OPTIC RODS. INDIVIDUAL COMPONENTS WILL NOT INCLUDE FIBER OPTIC.*
Replacement Fiber Optic - https://tarantacticalinnovations.com/replacement-fiber-optic-rod/
- 1/16 allen key.
- POA/POI set at 15 yards for Full Sized Glocks using 124 grain ammo. If you put the sights on another Glock (Sub compact/compact) the POA/POI will change since the sight ratio has changed. Figure out what your given POA/POI is for other Glock models and remember it. Take into account what type ammo you are using, different grain and bullet weight can change the bullets flight path.
- The TTI Ultimate Fiber Optic Sights for GLOCK were designed to the specifications of Taran Butler and Robert Vogel, for optimum sight picture and the brightest fiber optic front sight possible.
- The fiber optic dot has been moved up to the very top of the front sight so that the shooter will not get confused with shooting off the top of the dot or a big/thick blade sitting above it - Which can cause the shooter to shoot either too high or too low.
- The fiber optic bar is NOT partially embedded into the floor of the sight. That means that more light reaches a greater portion of the circumference of the rod.
- Our shiny, stainless steel screw, reflects even more light right to the middle of the rod.
- As an added bonus, the front sight is designed to also be compatible with the GLOCK factory screw in case it is dropped or lost at the time of installation.
- The front of the rear sight is angled to allow one-handed charging from your belt, pants, or any other object.
- The front sight is .235" tall and .115" wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.
- The rear is .245" tall. The tighter .125" rear notch helps dramatically when shooting small steel and tight shots at a distance.
- Rear serrations cut down on glare. Both front and rear sights are billet stainless steel coated with Diamond Black Ion Bond (95 Rockwell hardness) for the highest level of rust resistance and the strongest finish.
MBX Super Lightweight Barrel weighs Only 12.5oz by itself, after we install our MBX Compensator and we have produced an ALL Stainless 1lb PCC Barrel that comes in at 16.1 inches for Legal Length.
A 5 piece Delron stroker kit consisting of a long and medium main contact shim & stack shims .100-.200-.300 to allow multiple combinations of stroke length allowing you to tune your preference in trigger load and cycle speed. For 9mm AR
The Marksman Performance Choice Trigger is a single stage, drop-in trigger – now available for pistol caliber carbines! Our 9mm/ PCC trigger is a drop-in trigger for any standard AR-15 style pistol caliber carbine as well as the Sig Sauer MPX PCC. Perfect for the competition shooter and designed to give you more customization options and improve your finger’s position on the trigger, Our MPC 9mm/PCC trigger shoe is 3/8” wide rather than the standard 1/4” width of a standard trigger. This gives it a greater tactile feel and together with our MPC Series’ Sentinel Trigger Guard it’s an unbeatable combination that performs like no other. The Velocity PCC Trigger comes in 4lb pull weight only.
SIG MPX PCC 9mm16 inčna cev, nabojnik 30rdspreklopno teleskopsko kopitokategorija B4
The DAA Carbon 1911 Grips are 0.250 inch thick panels which create a surface that provides the flawless grip so critical for recoil control. The carbon offers a striking hi-tech appearance, and unparalleled durability. The tactical design includes a wide, deep, thumb cutaway which allows you unrestricted access to any mag-catch installed on your 1911. The CNC machined Carbon material is light weight extremely touch and is totally resistant to oils and solvents. These carbon grip panels offer not only improved performance when shooting your 1911, but also an attractive dark-colored carbon “techy” appearance. Each set include 4 stainless steel torx screws, with a custom head design, a torx key and are packed in a display-friendly blister-pack.
FEATURES
*This magazine will not work in Taurus PT-111 G2 pistols
*This magazine will not work in Taurus PT-111 G2 pistol
fits for all 2011
fits for all 2011 models
