Select your country
Please select your country
Cart is empty
Simply the fastest and most convenient way to clean your gun barrel, be it a pistol, a rifle or a shotgun. Simply drop the weighted end down the barrel, from breach to muzzle and pull through. Do so with or without solvent, as best suites you needs. One pull runs a copper bristle brush as well as a wide long swab down the length of your barrel. You do not even have to disassemble the weapon to clean! Can be complete in seconds, and your barrel will be ready for another session on the range or in the field.
The Magnetic IPSC magazine was designed with the IPSC shooter in mind. The Magnetic system is available in three versions for unlimited choice of carry options. For stationary matches you can use the MAG1, for running matches with higher risk of losing a magazine you can use the MAG 2. The MAG3 and MAG3D (magnetic pouch double magnet) combines the IPSC pouch with the magnetic system to quickly add a spare magazine without losing another inch of belt space.
M5 PLUS BLACK
CALIBRE : 223Rem
BARREL LENGHT : 16”
TWIST RATE : 1/9”
UPPER : Machined from MIL SPEC forged- AL7075T6 Hard black anodized M4 Feed ramps,
LOWER : Machined from MIL SPEC forged- AL7075T6 Hard black anodized
BARREL : Hammer Forged Nitrited – Heavy profile – thread : 1/2 X 28 with A2 flash hider.
GAS SYSTEM : Direct gas impingement with gas block low profile
BOLT CARRIER GROUP: Prismatic heavy phosphate
HANDGUARD: Octagonal free float slim with full size picatinny – CNC machined – M-LOK System – 12”
TRIGGER: MIL SPEC
STOCK : MIL SPEC collapsible
A set of double stack rotating magazine pouches. Interchangeable horizontal and vertical cups allow the shooter to choose the location that best suits him/her.
The kit includes different hardness of magazine retention springs. The white screws regulate the intensity and the free movement of the magazine when inserted.
Xtreme No Rust is the solution to protect and lubricate surfaces to prevent from rust. This spray when used in combination with Xtreme Gun Cleaner is the perfect combination and base for lubing with Xtreme Ceramic Gun Lube.
After cleaning the gun with Xtreme Gun Cleaner you spray a fine mist of Xtreme No Rust over the gun. This will set as a protective film over the parts of your gun. With a clean cloth wipe off the axcess.
After this step you are now ready for the next level. Greasing the gun on its critical parts with Xtreme Ceramic Gun Lube.
In 400ml spray.
Flammable: Cannot ship by air or outside the EU. Due to air shipping regulations some solvents and CLP liquids cannot be shipped internationally.
Designed for economy of motion when loading. Our new bullet tray is made of durable cast aluminum and is powder coated Dillon Blue. Fits RL 1050 / Super 1050.
Colored Aluminium grips for CZ Shadow 2 and SP-01 models in long version and short for magwell use with checkering that is extremely grippy.
The checkering is CNC cut in the surface and has straight angles and is circular ( 360° directional grip) , therefore has more grip than any other on the market.
Matching the color is difficult on the picture due to no uniformity in devices so please look for the color on the group picture for closest resemblance of the original color.
Long grips are for guns that do NOT have a Magazine funnel fitted
Short grips are for guns that have a Magazine funnel fitted.
Completely cut from Aluminium on CNC machines.
Color is anodized.
Enables 1 extra round in your TS magazine. Checkered underside allow an easier and faster magazine insertion, while also prevents palm slipping in case of wet or sweaty hands. More secure locking from backwards.
Fits in the IPSC Standard box!
Powder measure knob for the Dillon Powder thrower with click for easy adjustment. Unlike other competitors, this knob is laser etched with 50 graduations giving the user reference points when adjusting. Two steel spring loaded balls generate smooth and repetable clicks. Easy to setup between multiple loads or even calibres, very precise 50 clicks per turn.
Our Standard Division pistols come with all the bells and whistles that any IPSC Standard / USPSA Limited shooter needs. The Standard line is true to our mantra "ready to race out of the box", giving you all the features you'll need for competitive shooting from the get go.
With a quick change assembly and a caliber conversion kit (sold separately), you can convert your RL 550 Series press from one caliber to another in less than a minute.
Includes:
Hammer - Single Action and Double Action
HAMMER SA DA for models CZ 75, CZ 75 Compact, CZ 85, CZ 97, CZ SP-01
The installation must be done by an experienced gunsmith.
BARREL LENGHT : 14,5”
If you are serious about shooting, you are probably a reloader. So you are serious about gauging your ammo too. Armanov 100 pcs Ammo Gauge for gauging ammo tolerances and primer seating 100 at a time. Flip tray is also included, for easy ammo transfer from Case Gauge to MTM/Dillon style 100 pcs ammo box.
The Dillon RL550C is the most versatile reloading machine in the Dillon Precision Products line. It will accommodate the widest variety of cartridges from 32 ACP up to 338 Lapua, 416 Rigby, and 460 Weatherby.
The RL550 has a manually indexed shellplate making it easier to master the various steps of reloading. Manual indexing also gives the operator greater control over each individual step in the loading process. Caliber changes are simple and require fewer parts than other machines which makes it less expensive to convert to another cartridge.
Reloading with Dillon’s RL 550 is Easy as 1-2-3! Most shooters realize that reloading is the most economical way to enjoy their sport, but many shooters are unaware of just how simple it is to reload. In fact, Dillon’s RL 550C is the easiest progressive loader in the world to learn to reload with. How can we make that statement? Simple. Since all of the reloading steps are performed with a stroke of the handle, there is less to remember (or forget) than with an old-fashioned single-station press.
No dies are included with the RL550!
Bul tool-less guide rod kit.
Bul stainless steel main grip screws for 2011.
SAS II Open charging handle.
-Full
-Modyfied
-Cylinder
Works also for Benelli Nova/Supernova
MBX Super Lightweight Barrel weighs Only 12.5oz by itself, after we install our MBX Compensator and we have produced an ALL Stainless 1lb PCC Barrel that comes in at 16.1 inches for Legal Length.
A 5 piece Delron stroker kit consisting of a long and medium main contact shim & stack shims .100-.200-.300 to allow multiple combinations of stroke length allowing you to tune your preference in trigger load and cycle speed. For 9mm AR
The Marksman Performance Choice Trigger is a single stage, drop-in trigger – now available for pistol caliber carbines! Our 9mm/ PCC trigger is a drop-in trigger for any standard AR-15 style pistol caliber carbine as well as the Sig Sauer MPX PCC. Perfect for the competition shooter and designed to give you more customization options and improve your finger’s position on the trigger, Our MPC 9mm/PCC trigger shoe is 3/8” wide rather than the standard 1/4” width of a standard trigger. This gives it a greater tactile feel and together with our MPC Series’ Sentinel Trigger Guard it’s an unbeatable combination that performs like no other. The Velocity PCC Trigger comes in 4lb pull weight only.
The MPX has been a leader in the PCC category for years, with champions like Lena Miculek running the platform for its superior performance and reliability. Now the MPX is offered in the PCC competition ready platform that gives you the same reliability with the ultimate in performance. New on the PCC is the Timney MPX trigger designed for long-term performance in the MPX, slim M-LOK handguard for a more M4 feel, folding telescoping stock and 3 chamber recoil reducing compensator. MPX PCC is built to perform at the highest level with zero modifications and give you the reliability you have grown to expect from the MPX.
The DAA Carbon 1911 Grips are 0.250 inch thick panels which create a surface that provides the flawless grip so critical for recoil control. The carbon offers a striking hi-tech appearance, and unparalleled durability. The tactical design includes a wide, deep, thumb cutaway which allows you unrestricted access to any mag-catch installed on your 1911. The CNC machined Carbon material is light weight extremely touch and is totally resistant to oils and solvents. These carbon grip panels offer not only improved performance when shooting your 1911, but also an attractive dark-colored carbon “techy” appearance. Each set include 4 stainless steel torx screws, with a custom head design, a torx key and are packed in a display-friendly blister-pack.
FEATURES
*This magazine will not work in Taurus PT-111 G2 pistols
MEC-GAR Sig Sauer P226 magazine with AFC and 20rdn capacity with +2 basepad.
Brass open magwell for SAS II models (Ultimate Racer).
Brass standard magwell dor SAS II models.
