New items

The DAA Universal Cleaning Kit is a truly comprehensive kit including all you need to maintain both rifles and pistols. The kits in designed to support 6 calibers, including these rifle calibers: 0.177, 0.223, 0.308 , and these pistol calibers: 9mm, 0.40 and 0.45.

The kit is packed in a sturdy Tactical-type case, made of heavy-duty D-600 material and including a large top-quality wrap-around zipper. Zipper heads have long cord heads for easy access. The case itself is Molle-ready, and can be attached on the outside of many bags and tactical packs. Multiple Molle-Pattern Velcro tabs on the front, allow you to add name tags, patches or other small attachment items. The case includes a rubberized DAA logo on a front Velcro tab.

Inside the kit is a multitude of accessories, all  neatly packed and held in place with dedicated pockets and straps. The kit includes the following items:

• The tactical case itself
• A large leak-proof bottle for the oil/solvent of your choice (supplied empty)
• A large bristle brush with wooden handle
• A plastic/rubber cleaning rod handle, which doubles as the pull through handle for the flexible cables
• Two flexible rubber-protected cables for rifle barrel pull though cleaning. With brass threaded ends
• Two bags of cleaning patches
• Three-piece set of Utility double-end brushes (Steel, Brass, Nylon)
• 4-piece Plastic Hook set
• Double-end Steel dental tool
• Rod for pistol barrel cleaning
• 6 pcs of bronze cleaning brushes, in the supported calibers
• 6 pcs of mop cleaning attachments, in the supported calibers
• 2 pcs patch holders (large and small)
• 3 pcs brass jags, in the supported pistol calibers

A set of 4 fiber reinforced hard-nylon hooks, perfect for reaching into those hard-to-get-to corners and indents in your firearms, for cleaning and maintenance.

The plastic material used ensures that there is no risk of scratching or damaging your valuable firearm parts as you work on it. The assortment of end tips and shapes provides you with options to find the best form for the job at hand.

Packed in a plastic sleeve, with a cardboard header, suitable for display hanging.

A silicone cloth is one of the most useful items to have in your range bag. It has multiple applications for IPSC shooters: 

First and foremost it can be used to improve the feeding reliability of your magazines. Many top US shooters run their bullets through the silicone rag before loading the ammo into the magazine. When slightly coated with silicone, the bullets roll better in the magazines, and magazine feeding problems are eliminated. You can also run the silicone cloth through your mag tube when cleaning. 

Use the cloth to wipe down the outside of your gun and magazines to prevent rust and remove finger marks. 

The silicone cloths come packed in individual zip bags which prevent the rag from drying out. 

Only 4 Euro each, or take advantage of our promotional price - and order a pack of 5 for the price of 4 (see Combo: Silicone Cloth 5 Pack).

The Wide 2" Belt Hanger for Alpha-X Pouches, is a complete fully-assembled belt hanger for the Alpha-X pouches – enabling the user to attach these pouches to a wider belt. The wide bracket and included spacers will accommodate up to a 2” wide belt, and the two ¼” spacers make it easy to use on a 1.75” belt or a 1.5” belt as well.

The hanger is complete, including the steel bracket on the back with the two removeable spacers, and the ball joint for attachment to the Alpha-X pouch body.

Pouch body and pouch-spacers are not included.

A characteristic of virtually all progressive reloading machines, regardless of brand, is that the dies are set rather close together. When you are first setting up a "naked" machine, there is plenty of wrench room, but if you have a need to adjust a die afterward, it often requires a delicate touch to maneuver a lock ring on a crowded toolhead. 
Dillon Precision has addressed this in two ways. We now offer new 1" die lock rings and a 1" Bench Wrench to fit them. This combination gives much more room to re-adjust dies after they're already mounted. The opposite end of our new wrench is a 7/16" box-end for adjusting the Powder Bar of any Dillon Powder Measure. Our new lock rings fit any standard 7/8" x 14 dies.

Standard grip screw set for 2011.

- R-edition Lightweight hammer 12835

-R-edition Disconector 12517

-R-edition Sear 12417

all parts are Fully Machined SS

Torx Scews for grip 1911. Multiple finish options guarante a cool custom look.

he DAA Output Chute can be attached to any reloading press, hanging onto the same bracket which usually holds the Akro-Bin, and replacing it.

The long, 120cm (4ft) feed spring enables you to run the ammo down to a container on the floor, sparing you the need to empty that bin as you reload, and uncluttering your reloading press.

Some shooters prefer to have a muzzle support on their competition holster. This is an indisputable fact.

While most users will find that the Race Master holster functions perfectly without the additional muzzle support, there are some added advantages to using this extension: The muzzle support prevents the gun from being dislodged upwards, which could happen if bumped on the shooters thigh, or against a prop, during a walkthrough. If the holster was left unlocked, the gun can be dislodged. The muzzle support prevents this from happening.

Some Mr.BulletFeeder users have asked for the option to extend the output feed spring, to allow them to position the collator further away, or perhaps position one collator between two presses and use it to alternately feed each machine.

To meet this request we are pleased to offer the output springs and a screw-on adaptor cap which will allow you to attach to your current spring and extend it up to another 38cm.

 Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machinesand the large size (12mm inner diameter) as shipped with the pistol calibers.

 Note that some “do it yourself” supports for the spring will be needed to prevent it sagging under the weight of the bullets. You do need to keep the tube running downwards and prevent bullets from “pooling” in a sagging loop.

The 11-Coil (125-140mm mags) DAA 2011 magazine springs are made from hi-quality spring wire, and carefully formed and manufactured to maximize reliability, capacity and longevity.

The DAA Deluxe Magnetic Pouch utilizes two powerful 32mm magnets to hold the magazine securely in place while providing a smoother release than that achieved from the larger standard Magnetic Pouch. The support side walls allow us to use smaller magnets which in turn make the pouches more useable as an all-round pouch for every day use, and not just as a designated pick-up Pouch.

For those shooters who like the simplicity and minimalist look of an open magnetic pouch - this is the perfect choice! The slim body make it possible to position pouches closer together while still leaving enough room to reach down and grab the magazine correctly. The lack of external or front pouch walls allow the pouches to be spaced that much closer together. Perfect for Standard or Production where one must wear the pouches behind the hip bone.

The pouch is attached to our new model belt hanger, which locks securely on any 1.5" belt, clamping down to hold tightly even on thinner belts. The pouch can be swivelled around the centre screw (lower magnet's middle) to angle the pouch as designed. The off-centre mounting point on the hanger offers the option of two heights to choose from. The pouch body is machined from solid Delrin and so is tough and durable. Available in Black only.

Available for Right-Hand users only.

The 2018 Hanger Assembly for the Mr.Bulletfeeder by DAA ships as standard with all new units leaving DAA as of Jan 2018.

Should you wish to upgrade your current hanger assembly (the one with the round Delrin pucks and aluminum rods) you can do so by purchasing this new hanger separately. It is reverse-compatible with all previous Mr.Bulletfeeder by DAA units.

The new hanger is a simplified design, which makes assembly and adjustments to the tilt angle easier and faster to make. The Horizontal aluminum bracket clamps directly onto the motor gear box, allowing for easy assembly on either the left or the right side of the collator, to accommodate your specific position mounting needs.

The vertical piece hangs over the side of your case feeder, and connects to the horizontal bracket by means of a large M8 bolt, which can be loosened and rotated for tilt adjustments.

Sturdy attachment to the collator, a simplified design with fewer parts, thick aluminum profiles and way fewer screws make this hanger simpler and easier to setup and adjust.

Note: Machine NOT included - only Hanger. 

The low-profile, yet rugged aluminum housing surrounds a large viewing window that makes for a wide field of view and sight picture with next-to-no obstruction for rapid shooting transitions and target acquisition.

The Dropper Assembly is needed for shooters who wish to set up a second tool-head in the same caliber, and wish to quickly transition from, say, 9mm to .38super. Or from one 9mm bullet to another. A change is needed to the collator parts, and if a 2nd tool-head is to be used on the progressive reloader, it is quicker and easier to leave an adjusted Mr.Bulletfeeder dropper on each tool-head. This allows for quick swapovers, without the need to calibrate or adjust the dropper. Note that in most cases you will need to purchase an additional Powder Funnel for your second tool-head’s powder measure, as our expanding powder funnel is required for troublefree reloading.

Some Mr.BulletFeeder users have asked for the option to extend the output feed spring, to allow them to position the collator further away, or perhaps position one collator between two presses and use it to alternately feed each machine.

To meet this request we are pleased to offer the output springs and a screw-on adaptor cap which will allow you to attach to your current spring and extend it up to another 38cm.

 Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machines and the large size (12mm inner diameter) as shipped with the pistol calibers.

 Note that some “do it yourself” supports for the spring will be needed to prevent it sagging under the weight of the bullets. You do need to keep the tube running downwards and prevent bullets from “pooling” in a sagging loop.

Many PCC shooters use extended Glock Magazines, often with long base pads added for even more capacity.

To ensure the best possible retention in our Racer and Race Master mag pouches, we are pleased to offer this dedicated extended Glock Side spacer.

Simply assemble this spacer instead of your short one, and allow the bottom of your long mag to extend out the bottom of the pouch body, for a more balanced more secure retention.

The long spacer offers three hole positions in which to place the stopper, giving you the ability to experiment and decide for yourself what the best depth for your magazine is.

NOTE:  this spacer is not compatible with the Alpha-X line of pouches. Magazine and Magazine Pouch not inlucded!

DAA XL650/750 Debris-Out Casefeeder Adaptor, which replaces the original Dillon case feeder adaptor on your press, the slots cut in the pipe allow the debris to fall out the sides onto the small collection tray and the chances of a jam-up are greatly reduced.

Stop switch enables you to lock the case feed shuttle back to prevent cases from feeding into the shell plate when cycling the press. Easy installation. Just screw with two original bolts. Built in hinge made for super easy usage, cycle machine to down position and enable stop switch. Built in bulge that locks switch in case ON position.  Great for clearing the shell plate, maintenance, setup, or any time you don’t want cases to feed.  Made from high quality steel. This product is suitable for Dillon 1050 only.

Metal Stencil for Marking Ammo:

Kit consisting of

Floating trigger pin, Barrel bushing SP-01, Ultra lite set, Race hammer kit, Sear spacer, Trigger return spring, Hammer pin, Shadow 2 only disconnector. 

Ace's skeletonized stock for the AR-15 rifle. Closed cell foam overtube provides an extremely comfortable cheek weld. Uses A2 buffer tube, rifle length buffer and rifle length buffer spring (NOT INCLUDED). Foam overtube, buttpad and all needed mounting hardware included. Length 10" Weight 11.2oz

This stock uses Ace original soft foam overtube for the ultimate cheek weld. A billet machined gusset reinforces the receiver extension tube at its weakest point directly behind the receiver. Precision machined aluminum butt clamps directly to the RET and provides a machined in sling mount.

Seekins Precision, Safety Selector Kit, Red Finish

90 degree standard throw lever

60 degree short throw lever

Available in black or color anodize

Drop in replacement for Mil-Spec selector switch

Fully ambidextrous

Compatible with Ruger Precision Rifle

he Seekins Precision DNA Charging Handle offers a full body and textured grip surface to improve user controls. Our team set out to create a product that would not only offer ergonomic fit and function, but also aesthetic design. Crafted in a climate controlled laboratory by a team of scientists who were only allowed to use their right hands, we can proudly say the DNA handle is the most non-ambidextrous charging handle in our product line up. Really, it's just a charging handle, a very non-ambidextrous one. Enjoy!

Straight single action aluminum trigger with pre-and over-travel adjustment.  All Cajun Gun Works supplied triggers include a 1.5mm allen wrench for your convenience.  This trigger is now a Cajun Gun Works product proudly “Made in the USA”!

TECH TIP:  This is a “conversion” trigger and completely disables the double action feature.  When installing this trigger you will need our TR-PIN as a replacement for the throw away CZ OEM trigger pin, and our SP starter punch for removing the CZ OEM trigger pin.  Remove the disconnector when installing this trigger.  This trigger cannot be used in any CZ decocker.

barrel bushing for the “standard barrel” 9mm manual safety and decocker pistols.  Fits: 75B in 9mm (will not fit the 75B .40, see our 7510X), P-01, PCR, 75B Compact, 85C and 85B.  Made from 4140 and heat treated to RC45.  Reduces barrel muzzle play to -0- at lock-up.  This is a direct replacement for the OEM bushing.  Fits .504” OD CZ’s.  USPSA Production Approved.

NOTE:  Some minor fitting may be required typically at the #46 retaining pin groove.

IDPA Production Legal upgrade kit for the manual safety CZ 75 models.  Fits all “classic” lock work manual safety 75 and 40B, including SP-01.  Everything you need excluding tools.  Our starter punch, part number SP is highly recommended.  Absolutely No Substitutions.

IDPA production legal, full upgrade kit. Includes everything for a 100% compliant competition ready drop-in package for all manual safety 75 series, 75B, 75B Compact, 40B, and SP-01, etc. NOTE: Recommended “Competition” and “Race” gun use only.Produces a 3# or less SA pull weight, not recommended for self-defense use. For all other applications, see our 75100 and 75110 upgrade kits. Absolutely No Substitutions.

Shadow 2 Reach Reduction Kit with ultra-short reset now USPSA Production approved.  Cajun Gun Works’ famous RRK that permanently re-positions the trigger rearward with the hammer fully lowered an amazing 5 mm’s and reduces single action pre-travel dramatically.  Includes our “old style” stainless steel 85C trigger “Made in the USA”  with pre and over-travel screws so you can custom tune to your CZ.

This not only relocates the trigger, but it also doubles as an ultra-short reset for single action.  

Includes 2 different hammer pins (1 x HPIN and 1 x 75009) so you can be assured a secure attachment to either the factory hammer or Cajun Gun Works hammer.  Lifetime warranty to the original purchaser

New Shadow 2 ultra-short reset disconnector.   After extensive testing, we have engineered a new disco just for the Shadow 2.  This part will drop into most S-2’s and require no fitting, however, due to the timing variations from pistol to pistol, some very slight fitting may be needed on some S-2’s.

This ''Follower Kit'' includes: A "Grams Format" follower (CL) & (13coil) spring. For use in CZ "large frame" (Tactical Sport/Checkmate), 9x19 or 40&w magazines, that measure up to 171mm long (with a base pad attached).

A truly ergonomic, shooter focused flat top grip for AR platform rifles and chassis systems. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip comes with the patented Gapper™ for increased comfort. Very similar in size to the Original ERGO Grip

Knights Armament Company, Top Rail Rubber Thumb Rest, Fits Picatinny, Black Finish