Select your country here
Please select your country
Il carrello è vuoto
A replacement threaded die body for your Mr.Bulletfeeder by DAA Dropper. This threaded body is compatible with all calibers.
The only brush designed with your magazine in mind. Once you own one of these brushes, you will never clean you magazines any other way. One tool to dismantle most magazines and clean them. Making the cleaning easier - which means you will do so more often. And that means you will suffer less malfunctions. Few things are more important to gun reliability than keeping your mags clean!
The CED Carbon Fiber EVA Pistol Case combines all the great features desired in an EVA a case. A hard, protective and cool looking shell. Zippered and lockable with a TSA approved combination lock making it ideal for air travel. A handle for easy carry, and dense eggshell foam for complete protection of your valuable pistol. Will fit one open class or two production pistols.
How to set your private combination:
Available in Black Carbon Fiber finish only.
Dimensions: 32cm x 21cm x 8.5cm (12.8” x 8.4” x 3.4”)
Kit includes: - Spring Buffer Pad - Custom Buffer Pin - Set Screw - Allen Wrench - 3 Springs: "Red" Standard Power .062 "Green" Reduced Power .055 "Blue" Lightest Power .047
Please see recommendations for matching Springs
YELLOW Carbine Spring recommended for most Standard Applications min 115 Power Factor up to 145 Power Factor.
WHITE Carbine Extra Long Spring recommended for 140 Power Factor and Above.
The Lyman QwikDrawTM Barrel Cleaning Rope is a fast, all-in-one cleaning tool that reduces your cleaning time to a fraction of what it would be with a traditional cleaning rod.
Product Details
The Magpul PMAG Ranger Plate is a floorplate replacement for all 7.62x51 PMAG LR/SR GEN M3 magazines that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.
Made in U.S.A.
Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included.
Features
Similar in concept to the Magpul Ranger Plate™ for AR15/M16 magazines, the SpeedPlate allows for rapid magazine extraction and positive handling. Protects the base of magazine from impact.
The SpeedPlate replaces the floorplate on all factory Fully Metal Lined (FML) GLOCK 9mm and .40S&W double-stack pistol magazines.*
*NOTE: SpeedPlate is NOT compatible with the Magpul® GL9 series of PMAGs®.
The MS1 Padded Sling is an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings. By adding the appropriate adapter (available with Paraclip™ or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1.
FEATURES
The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc.Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability and included Pin keeps upper in proper position.The BEV can also be turned over and used as a mag well vise block to support the lower receiver during maintenance, etc.Made in U.S.A.
Specifications
BEV™ Block – AR15/M4
The PMAG Minus 10 Round Limiter installs in 20 or 30 round GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.
NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.
American-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric and SAE bottle caps.)Made in U.S.A.
Armorer's Wrench – AR15/M4
NOTE: Not compatible with larger pistol-style receiver extension tubes
JP .223 Enhanced Gas Rings
As a replacement for traditional three-piece gas rings, the JPEGR-223 utilizes a one-piece design similar to the McFarland rings. Unlike the McFarland rings, though, our precision-ground gas rings are engineered to precisely suit small-frame carrier group components such as our own JP EnhancedBolt™.
After testing numerous minute grind callouts, the final JP Enhanced Gas Rings spec is the perfect balance of a solid gas seal with a very low-friction relationship between rings and bolt carrier. Reducing the resistance between these components directly results in an overall increase in the rifle's operational window while the edge of the rings utilizes the cycling action itself to scrape the walls of the carrier, helping shed fouling with every shot.
JP Enhanced Reliability Spring Kit
This spring kit will yield a 3.5-4.0 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger components.
Application: Use of this spring kit allows for use of ammunition with low-sensitivity primers such as those found in NATO-spec and various foreign-manufactured ammunitions, but in the case of large-frame ARs and duty/defense rifles, domestic-manufactured ammo is strongly recommended to ensure 100% ignition reliability.
The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing.
Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.
MBX Offset Scope Mount
The MBX Offset Scope Mount for full size C-More. Designed for fast and easy "heads up" acquisition when installed on a rifle for PCC competition and steel challenge.
Allows for extremely fast and easy visual access of red dot without having to place head over top of butt stock centerline.
Attaches to C-More railway base plate.
Available right or left handed.
-For Right Handed Shooter Choose Right Handed Mount -For Left Handed Shooter Choose Left Handed Mount
Comes with necessary screws for mounting when used in conjunction with railway mount.
The MBX "Patent Pending" Buffer is Designed specifically for Pistol Carbine Caliber.
Features an Internal Spring captured within the Buffer to allow for the Buffer/Bolt speed to be significantly reduced during the cycling of the Firearm, resulting in an Extreme Reduction with Felt Recoil.
- Buffer weight 6.8 ozs - Overall length 4.9 inches - Made from Stainless Steel - Includes internal .062 recoil reduction spring - Captured Pin Design to ensure reliability and Performance
2 Adjustable Stoke Lengths: - 1.400 Stroke Long - .900 Stroke Short
In the MBX Buffer tube these parts move at the same velocity as the bolt and run much smoother and silent with a little oil. - Oil the MBX Buffer inside and out - Wipe the main Buffer spring with an oily cloth to add lubrication to the spring - Any medium to light weigh oil is good
MBX 9mm PCC Compensator "Patent pending"
Designed specifically for competition shooting to achieve the best performance possible with the lower gas volume Pistol Caliber Rifle.
Extra tall port design along with offset side semi circle design for increased surface area. Resulting in highly efficient gas redirection which creates improved downforce and greater stability for the ultimate in dot tracking and follow up shots.
- 20 Deg rear slope port configuration increases compensator forward brake motion to aid in felt recoil.
- Made from T6 aluminum, hard anodized for light weight and durability.
- Includes threaded lock nut for easy installation and 6/32 tapped set screw to aid in installation or pinning if required.
- 3" overall length, .875 wide & 1 1/4" tall
- Available threads: 1/2 x 28 & 1/2 x 36
- Weight: 2.4oz
Mil-spec 6-position buffer tube manufactured from 7075 aluminum with black anodized finish.
Tube only; endplate and castle nut not included
Nordic Components, Extended Magazine Release for 10/22 Rifles, Black Finish
The Timney replacement trigger for the Sig Sauer MPX is the latest in the Timney lineage of semi-automatic, replacement triggers. Timney collaborated directly with SIG on the design and features of the MPX drop in replacement trigger.
The trigger, hammer, and bridge are constructed of heat-treated steel. The housing is machined from 6061 T6 anodized alloy and the trigger is heat treated steel and coated with black oxide .
The trigger is single stage and features a straight blade. The Timney replacement trigger for the SIG MPX is a self-contained, 100% drop-in trigger ready to install in your rifle for an exceptionally smooth, crisp, trigger pull with no gunsmithing, fitting, or adjusting required.
The MPX replacement from Timney features a hardened steel bridge to protect the trigger components from the vigorous bolt blow back characteristics prominent in Pistol Caliber Carbines. The single stage trigger features a non adjustable trigger pull weight of 4.5 pounds. Drop in installation is simple once the Factory trigger is removed, you will reuse the factory Hammer and Trigger pins.
Set screws are located in the housing to lock the trigger in place and prevent the pins from walking out of place. The Timney drop in MPX trigger works with the factory safety as well as many aftermarket replacements, especially the Timney 49r ambidextrous, short throw safety available here on the website.
The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon.
SUPER CHARGING HANDLE (SCH®) 5.56
The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized and are available in black
SUPER DYNAMIC 3 GUN (SD-3G) TRIGGER
The Geissele Super Dynamic 3 Gun (SD-3G) Trigger is based on the S3G Trigger. Like the S3G, the SD-3G has a shortened pull length and a lightning-quick reset to give it a unique, hybrid trigger pull that is a cross between a traditional two-stage and single-stage trigger while still retaining the safety and robustness of a two-stage combat trigger. The SD-3G’s flat trigger bow further enhances the trigger’s performance by reducing the perceived pull weight and improving the trigger’s tactile feedback to the operator making it ideally suited for 3 Gun competition shooting.
The Geissele Hi-Speed National Match Trigger Series is designed for NRA High Power Rifle competition with highly modified match-grade AR-15-type rifles. The Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets are all included in this purchase.
Desgined for use with 22LR AR conversions. 25rd Capacity.
Super Dynamic Enhanced SD-E AR Trigger
The Geissele Super Dynamic-Enhanced (SD-E) Trigger featuring an exclusive flat trigger bow, is a finely-tuned two stage trigger providing enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger.
Our Gun builders kit includes most of the necessary parts to build up your lower group except the commonly upgraded parts. Does not include Trigger Guard, Fire Control Group, and pistol grip.
Gas Tube Kit, Rifle
Parts Kit, AR15, Bolt Rehab
Discounts
more than 2.000 pcs
-5%
more than 5.000 pcs
-10%
Due to popular demand we are now pleased to offer you the DAA Super-Strong magnets, sold separately, for mounting on the DAA Alpha-X / Race Master pouches, or any other type of base you care to use them on.These Zinc plated magnets are incredibly strong, offering approx. 87kg of pull strength. With these magnets, you can slap on that magazine quickly and confidently and know that it will not fall off as you move. The magnets measure almost 50mm in diameter, and are 12mm thick (with their casing).Fitting to an Alpha-X / Race Master Pouch:In the front of the pouch there is a 4.2mm hole, which can be used to attach the magnet to the pouch body. You will need to tap (thread) this hole using an M5 Tap. Do it carefully and slowly as the thread needs to be precise, as there is only a 2.5mm side wall to work with. once done, simply screw the magnet directly onto the front of your leading pouch. We suggest using a little LockTite on it, to keep the screw from opening.Do not worry if the tip of the screw protrudes slightly into the pouch body - the magazine does not reach down far enough to hit it.
Armanov Magazine Base Pad for CZ 75, Shadow2, SP01 MaxxxGrip +2Rnd has extremly high gripping force so handling is much more secure and precise. Bottom of magazine pad is covered with special anti-slip material and sides are serrated for maximum grip. This is very important in dynamic sport shooting where you have to change your magazine fast and precise.
Base pad also adds two rounds to increase the magazine capacity from 17 to 19. Legal for IPSC production division. Compatible with all CZ 75 17rnd capacity magazines. CZ Shaodow2 for CZ and Mec-Gar Magazines.
MULTI CALIBER PISTOL CLEANING KIT
Covers 380 Auto, 9mm Luger, 38 Special, 357 Magnum, 40 S&W, 45 ACP and 45 Colt calibers. The handle features a rotating attachment point for the rod, which allows the rod to rotate and follow the rifling in your barrel. All the components are packed in a convenient plastic carrying case.
(3)bronze brushes
(3)brass jags
(3)mops
(1)slotted patch holder
(1)cleaning rod handle
(1)rod centering guide
(1)bag of patches
(1)bottle of gun oil
(2)brass cleaning rods: 5 ½” rod and 2” extension
he PL-MINI Valkyrie is the world’s most powerful compact weapon light with a maximum output of 1200 lumens using a built in CREE XP-L HI LED.
spring not included
Aluminum "Plus-2" adapter to fit on Mec-Gar magazines with a metal floorplate.
Contains:
If used to replace a polymer floorplate this item will leave a gap between the frame and floorplate! Use item F42223-ST for a better fit.
Fits on the following Mec-Gar magazines:
follower not included
Replacement floorplate set to increase the capacity on Mec-Gar Optimum Series flush fitting magazines
