Sélectionnez la marque

Ajouter des nouveaux élements


49.18  

SPUD

Designed for the sportsmen on the move, the SPUD features loads of storage room along with molded-in bungee hook receiver so you can strap it down tight to anything, from a fishing boat to an ATV.

The SPUD 7's spacious design offers a whopping 2,073 cubic inches of dry storage. It can carry items up to 14 inches tall. It is also the perfect height (15 inches) for dove and waterfowl blind hunting and as a chair when using MTM's predator shooting table. It also comes with a nylon shoulder strap for hands free carrying. Load one up for the range and then use it for a chair once you get there!

The SPUD 7 offers several features including: Water resistant O-ring seal; top access lid compartment ; deep 2/3 length lift out tray; four Bungee hook receivers; large comfortable handle; thick sidewall construction; heavy-duty snapping latches; and double padlock tabs.



29.51  

SPUD

No wasted space here. The SPUD  features an 80% usable, top access lid compartment. The compartment contains five sectioned areas where you can keep your small items separate and safe. Many features including: water resistant O-Ring seal; five section lid compartment; full size lift out tray; large comfortable handle; thick sidewall construction; heavy duty latch; and double padlock tabs.


64.75  
En stock
+






5.74  
En stock
+



48.36  
En stock
+

60.66  
En stock
+



68.03  
En stock
+




8.16  
En stock
+





4.92  

MTM jag & brush case, 4 compartments, clear only case.

En stock
+


20.49  
Mag Release OVS Mag release oversized, made up of two different pieces to ensure greater functionality while assembly phase. The knurled outer surface is great for improving its grip, as well as the elongated shape that makes the release easy even for those with small hands.
En stock
+




40.98  

DS-750 Mini Digital Reloading Scale

From first time reloaders to competitive gun and archery shooters, MTM Case-Gard™ introduces a pocket sized scale that is sure to satisfy all level of sportsmen. 

  • Easy to read, backlit LCD display.
  • Powder pan, custom designed to facilitate bullet, powder and arrow weighing.
  • Extended, 3 minute auto shut-off, most scales turn off after 30 seconds.
  • Up to 750 grain capacity.
  • Plus or minus .2 grain accuracy.
  • Measures in grains, grams, carats and ounces.
  • Stainless steel sensory platform.
  • Plastic sensory cover that doubles as large powder pan.
  • Calibration weight and detailed instructions included.
  • A high-quality, foam lined case for permanent storage and protected travel.
  • Not recomended for trickle powder charging, we recomend a plug-in scale for that.
  • Uses 2 AAA batteries(included) which are easy find.

Great for the reloading bench or a well equipped shooting box, the DS-750 is packed with features that shooting sportsmen needs.


22.95  
En stock
+

40.16  

ACR8 Ammo Crate Utility Box

Designed for ammo storage, but perfect for storing shooting, hunting or survival gear. Two extra strong handles make it easy to carry upto 85 pounds of gear. Designed to be stacked high, using molded-in stacking ridges. Four tie down points for ATV attachment. Features MTM's tongue and groove O-Ring seal system for a water-resistant dry storage. Double padlock tabs along with two strong latches make these ammo crates the perfect solution for many storage needs. Made in the USA, with high-impact polypropylene plastic.

En stock
+

27.05  

ACR7 Ammo Crate Utility Box

  • Carry up to 65 pounds of gear with two strong side handles
  • Stackable design and double padlock tabbed for security; Four tie-down points on side
  • Water-resistant O-ring seal for dry storage; Non-submersible
  • 890 Cubic Inches
  • Exterior 17.2" x 10.7" x 9.2”(H)
  • Interior 12.4" x 8.4" x 8.5"(H)
  • The latches are mounted on side for easy carrying; Made in USA

Designed for ammo storage, although perfect for storing shooting, hunting or survival gear. Two extra strong handles make it easy to carry 65 pounds gear. Designed to be stacked high, using molded-in stacking ridges. Four tie down points for ATV attachment. Utilizing MTM's tongue and groove O-Ring seal system for a water-resistant dry storage. Double padlock tabs along with two strong latches make these ammo crates the perfect solution to so many storage needs. Made in the USA, with high-impact polypropylene plastic. Can be used as a boaters dry storage box, first aid, safety and RV camper storage container.


15.57  

30 Caliber Ammo Can

MTM ammo cans are a great way to store bulk or boxed ammo. Its all plastic design is lighter in weight than the 30 caliber US Military Surplus Ammo Cans. Transferring ammo to and from the range, just became a little easier! Ideal for bulk 45 ammo.

Molded out of rugged polypropylene plastic, these comfortably handled ammo cans will hold up to some pretty harsh treatment. Utilizing MTM's tongue and groove O-Ring seal system for a superior water-resistant seal, the 30 caliber can is designed to fit the same amount of bulk ammo as the originals. A heavy-duty dual latching system makes for a better seal and less likely to open accidentally. Double padlock tabs along with molded-in stacking ridges, make these solid containers the perfect solution to so many storage needs.


31.97  

Two cans in one, the Can-In-A-Can provides a 50 cal. Ammo Can (AC50) with a 30 cal. Ammo Can (AC30T) packed inside.

En stock
+

14.75  
Pin Anti-Walk OVS Increased pins, with external screws that ensure a precise alignment between trigger and hammer, avoiding deformation of the trigger. They are made of high quality steel, subjected to heat treatments and finished with black phosphatation.
En stock
+

130.33  

RANGE READY™ BAG DETAILS

Constructed from durable, all-weather 600D nylon, the Range Ready™ Bag features seperates padded storage for multiple pistols, a zip-down front organizer that effectiviely stores 8 magazines, side pockets, a removable ammo tote to keep you topped off, and a removable brass tote for easy cleanup. With a padded should strap, easy-grip handles, and an ID insert, you'll be home on the range in no time.

En stock
+

23.77  

50 Caliber Ammo Can

MTM ammo cans are a great way to store bulk or boxed ammo. Its all plastic design is lighter in weight than the 50 caliber US Military Surplus Ammo Cans. Transferring ammo to and from the range, just became a little easier! I deal for bulk 45 ammo.

Molded out of rugged polypropylene plastic, these comfortably handled ammo cans will hold up to some pretty harsh treatment. Utilizing MTM's tongue and groove O-Ring seal system for a superior water-resistant seal, the 50 caliber can is designed to fit the same amount of bulk ammo as the originals. A heavy-duty dual latching system makes for a better seal and less likely to open accidentally. Double padlock tabs along with molded-in stacking ridges, make these solid containers the perfect solution to so many storage needs.

En stock
+


3.28  
En stock
+


20.49  

AC11 & AC35 Ammo Cans

This O-Ring sealed ammo can offers the perfect solution to so many storage needs. Made to carry anything from bulk ammo to decoy weights to pet food.

Our Ammo Can easily handles 30 pounds of gear in an easy to transport package. It provides excellent, water resistant protection along with extraordinary durability. Molded out of rugged polypropylene plastic and has a comfortably handle holds up to some pretty rough treatment. The Ammo Can offers a heavy-duty dual latches for better sealing, three padlock tabs and molded-in stacking ridges for slip resistant stacking. Great for protection in basements, garages or storage sheds. The ammo can does not have a tray on the inside.

Inside Dimensions: 7.3”(L) x 12.5”(W) x 7.3”(H)

Inside space of 707 cubic inches

Outside Dimensions: 9.3”(L) x 15.3”(W) x 8.8”(H)

 


16.39  
Pin Upper/Lower OVS Increased and calibrated pins, specially designed to reduce coupling tolerances between Upper and Lower. They are made of high quality steel, subjected to heat treatments and finished with black phosphatation.
En stock
+

4.09  

La quantité minimum pour "Main spring CZ 12 Lbs" est 2.

En stock
+

8.19  

Magazine pouch made of ABS which is a high impact resistant polymer. An internal tension spring holds the magazine firmly inside the pouch. Thanks to a reduced spacer and size it is ideal for concealed carry – both for police and military as well for sport (IDPA, IPSC and ACTION SHOOTING).

En stock
+

12.30  

Springs for A2 Stock regular and light strength

En stock
+

16.39  
Single pouch
En stock
+

55.74  
En stock
+

12.29  
En stock
+

13.11  

The ADC lightweight spring for AR15/A2 fixed stock. Ideal for lightweighed carriers.


45.08  

The new internal holster Inside ‘’S’’ permits you to carry the weapon inside occupying less space; and guarantees an easier way of attaching a holster to the belt.

Material is the same as the one of its older version INSIDE.

En stock
+



10.66  

CASE-GARD™ Rifle Ammo Wallets

Hunters, as well as police snipers will appreciate being able to remove bullets quickly and quietly from their jacket or shirt pocket using these 9 round ammo wallets. These boxes hold your ammo securely and also provide tip protection. They come with a textured finish and a MTM 10-year guarantee. They come in 2 sizes small and large.

Small , 17 Fireball,17 / 221 / 222 / 223 Rem, 204 Ruger, 219 Donaldson Wasp, 22BR, 22 PPC, 22 Sav. HP, 220 Rus., 222 Rem. Mag., 22-250, 223 Rem. HP, 224 Wby. Mag., 303 Sav., 30-30 Win., 32-40 Win., 32 Win S. L., 32 Win. Spl., 351 WSL, 6x47, 6mm BR-DX, 6mm Norma BR, 6mm PPC USA, 7.62x39 Rus.

Large, 220 Swift, 243 / 270 / 308 / 348 Win., 250 / 300 Sav., 257 Roberts, 257 / 300 / 340 / 7mm Wby. Mag., 264 / 300 / 330 / 338 Win. Mag., 25-06 / 280 / 284 / 35 / 6mm / 7mm-08 Rem., 300 / 375 H&H Mag., 30-06 Spr., 303 Brit., 30-40 Krag., 308 Marlin Exp., 308 Norma Mag., 333 Jeffery, 35 Whelen, 40-60 Marlin, 40-70 Sharps (Straight), 410 Shotshell’s, 44-40 Win., 445 Super Mag, 45-70 Govt & WCF, 6.5 / 7mm Rem. Mag., 6.5 Creedmoor, 6.5x50 Jap. Arisaka, 6.5x52 Italian, 6.5x54mm Mann-Schone, 6.5x55mm Swedish, 7x57 Mauser, 7x61 Sharpe 7 Hart, 7.5x55 Swiss, 7.65x53 Mauser, 7mm BR, 8mm-06


20.49  

Slide the module between the Molle straps and use the same holster you are familiar with on your OPS vest.

  • Attaching to the vest is easy and fast
  • The materials used guarantee a secure attachment on the vest
  • For right and left hand attachment use
En stock
+

14.75  
En stock
+

36.89  

This set of Ghost glasses has a matte black, high sitting 3-point design frame with straight legs. The rubber legs keep their grip even when they are wet from sweat. You will never lose these glasses during running. 3-point design touches the face only on 3 points creating a very comfortable wear.

We created a set which combines the best coverage of your eyes, extreme high level of protection and very comfortable to wear. Each set comes with 4 lenses. Clear , yellow , blue-ish grey reflective front and a fantastic polarized lens which iliminates glare. All made from parallax free 1.4 mm thick Poly Carbonate.


40.16  

Ideal for sporting use, this has been made lighter than the standard A2 and it is therefore compatible with our lightweight carriers and spring A2.

It can be used only with fixed stocks.

Weight: 85 g

En stock
+

28.68  

Sport rifle magazine pouch L is complete with rotating clasp for adjusting the angle and a low-ride belt attachment. This guarantees a very fast and comfortable draw. These pouches are ideal for longer magazines and seated or kneeling shooting positions. Adjustable retention by four screws on both sides of the pouch hold the magazine firmly in place. Available for AR15 or AK47.

En stock
+

13.93  

The Universal Ghost Hybrid Pouch is supplied with internal retention of the magazine and gives complete carry freedom and flexibility due to the rotating speed clip.

Different types of retention springs are available to ensure the best suited retention for your needs. The cup is also equipped with a system to remove all magazine movement inside the pouch. Thanks to the clip, you can use belts up to 4 cm in width.

En stock
+

135.25  

A recoil reducer designed to eliminate vibration and annoying noise that characterizes the operation of AR platforms.

The package includes the spring system and thickness body for potential use of fixed calcium.


24.58  

The Magnetic IPSC magazine was designed with the IPSC shooter in mind. The Magnetic system is available in three versions for unlimited choice of carry options. For stationary matches you can use the MAG1, for running matches with higher risk of losing a magazine you can use the MAG 2, that is a magnetic pouch with wings and rotating speedclip. The MAG3 and MAG3D combines the IPSC pouch with the magnetic system to quickly add a spare magazine without losing another inch of belt space.

En stock
+

20.49  

Thanks to the smart design, single stack mag. pouch reduces the space used on the belt. You are now able to carry 5 magazines with only the space on your belt for one magazine.

High tensile strength materials designed for professional and competitive use. The internal spring holds the magazine firmly in place. Thanks to the special rotating Speed Clip it is possible to rotate the pouches for a better extraction.

Suitable for every type of belt.

  • Suitable for IPSC  shooting (Classic)
  • For single stack magazines
  • Possibility to carry up to 4 magazines
  • With internal retention spring
  • Version with magnet (SG-MAG11M)
  • Version with double magnet (SG-MAG11MD)
  • Rotating Speedclip
En stock
+

56.56  

Bolt catch oversized both internally and externally. Visible prolonged internal flap that allows adaptability with all magazines. The knurled outer surface is great for improving its grip.

It is made of high quality steel and subjected to heat treatments to make the contact surfaces resistant and unaltered over time.

En stock
+

31.97  

Metalform 9mm for 10 rounds with metal mechanism and nylon base pads, with a large fixing fracture for easy magazine removal.

En stock

1.63  
En stock
+

6.56  

Lee Replacement decapping pin for Decapping Die (#90292)


19.67  

When you need to pull some bullets for whatever reason, and impact style tool is the easiest method. Just one stern “whack” and the bullet is separated from the brass. It is that easy. Three different collets are included allowing you to pull bullets  from just about every caliber rimmed or rimless. Versatility makes this bullet puller the only one to have.


229.51  

Our carrier “Light competition” has been designed to be as light as possible, weighing only 182 gr with gas key assembled; it is ideal for sport activities, combined with ADC Adjustable Gas Block it allows the carbine to have a good yield.

Completely made of stainless steel, it is finished with anti-friction treatments that increase the fluidity in operation.

Even the aesthetics have not been neglected, the side and front grooves give a sinuous shape and sense of lightness.

En stock
+

4.92  

Firing Pin Spring for Glock.

En stock
+

4.92  

Trigger Spring for Glock Lightweight competition


113.93  

The 3M PELTOR ProTac III hearing protector helps protect against harmful noise, whilst allowing ambient sounds to be heard at a level below 82dB. It increases your ability to communicate with nearby colleagues, as well as hearing warning signals, approaching vehicles, or sounds in machines and processes.

Noise reduction 26 decibel.

  • Built-in level-dependent function allows the wearer to hear ambient sounds, such as conversations, machine sounds and warning signals
  • 3.5 mm listen only stereo input (limited to 82 dB) for connection to external devices (e.g. mobile phone, radio, two-way radio and iPod)
  • Voice guided menu system to prevent you from taking the headset off
  • Auto power off turns headset off after 4 hours of non-use, to save energy and a low-battery warning informs you when to change batteries
  • To reduce the corrosion caused by sweat the electronics are located in the outer part of the cup
En stock
+

72.98  

Pimp your AR !!!  Toni System is the adress to look for functionality, quality and design.

To personalize your AR you can choose different colors.

To enhance and speed up the handling of your AR, look no further, TONI System has the right parts.


65.57  

Safety sel. ambi 90°-45°

Safety selector ambi that offers the option of being installed at 90 degrees or 45 degrees.

It has a central screw that allows safe adjustment, making it perfectly operational both assembled on the trigger kit ULTRA and on all other trigger group on the market.

The package includes a short external lever and a reversible standard one that allow ambidextrous use.

The aesthetic peculiarity is the shape of the ace of spades, the ADC brand.

En stock
+

33.20  

Pimp your AR !!!  Toni System is the adress to look for functionality, quality and design.

To pesonalize your AR you can choose different colors

To enhance and speed up the handling of your AR, look no further, TONI System has the right parts.

En stock
+

17.62  

Toni Systems Oversized Magazine button. No fumblin but a firm button for your Magazine.

En stock
+

25.83  

Pimp your AR !!!  Toni System is the adress to look for functionality, quality and design.

To pesonalize your AR you can choose different colors

To enhance and speed up the handling of your AR, look no further, TONI System has the right parts.

En stock
+

24.60  

 

 

En stock
+

5.74  

Pimp your AR !!!  Toni System is the adress to look for functionality, quality and design.

To enhance and speed up the handling of your AR, look no further, TONI System has the right parts.


81.18  

Magwell for the 2011 STANDARD pistol.

En stock
+

196.72  
Trigger Kit Ultra Competition The trigger kit “ULTRA”, all of our design, it is designed for top-level sport activities. Its modularity makes it functional also for precision shooting. It is not compatible with military ammunition. Fully adjustable, with very short reset, it is...
En stock
+

25.83  

Pimp your AR !!!  Toni System is the adress to look for functionality, quality and design.

To pesonalize your AR you can choose different colors

To enhance and speed up the handling of your AR, look no further, TONI System has the right parts.

En stock
+

79.10  

LOS copper plated bullets consist of compact lead cores and special thick plating. This gives bullets maximum protection from the lead, making them highly appropriate for shooting in indoor shooting ranges. Bullets are additionally calibrated to achieve the highest possible performance.

En stock
+

71.50  

LOS copper plated bullets consist of compact lead cores and special thick plating. This gives bullets maximum protection from the lead, making them highly appropriate for shooting in indoor shooting ranges. Bullets are additionally calibrated to achieve the highest possible performance.

En stock
+

110.62  

LOS copper plated bullets consist of compact lead cores and special thick plating. This gives bullets maximum protection from the lead, making them highly appropriate for shooting in indoor shooting ranges. Bullets are additionally calibrated to achieve the highest possible performance.

En stock
+

86.00  

LOS copper plated bullets consist of compact lead cores and special thick plating. This gives bullets maximum protection from the lead, making them highly appropriate for shooting in indoor shooting ranges. Bullets are additionally calibrated to achieve the highest possible performance.

En stock
+

79.10  

LOS copper plated bullets consist of compact lead cores and special thick plating. This gives bullets maximum protection from the lead, making them highly appropriate for shooting in indoor shooting ranges. Bullets are additionally calibrated to achieve the highest possible performance.

En stock
+

80.99  
En stock
+

56.56  

To keep your machine running also when you had a little accident.

Spare parts kit specifically for your Super 1050 machine.

Don't risk downtime waiting for a replacement parts!

Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.

Note : The aerosol inside makes it impossible to ship this by air.


40.70  

Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.
Note : The aerosol inside makes it impossible to ship this by air.

En stock
+

73.73  
Low Profile ADJ Gas block Low-profile gas block for barrels with standard diameter of .750 “, featuring Clamp-on locking system with high resistance torx screws. It can be used with handguards with a minimum internal diameter of 35mm. Typically designed for sporting activity it has been...

76.31  
En stock
+

106.56  

Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included.

This item does not check the accuracy of the powder charge, it checks for double-charges or no-charges only.

En stock
+