Select your country here
Please select your country
Корзина пуста
Single Action
HAMMER SA for models CZ 75, CZ 75 Compact, CZ 85, CZ 97, CZ SP-01
The installation must be done by an experienced gunsmith.
High Quality Spare PCC AR Platform Firing pin spring RC Tech
Simply the fastest and most convenient way to clean your gun barrel, be it a pistol, a rifle or a shotgun. Simply drop the weighted end down the barrel, from breach to muzzle and pull through. Do so with or without solvent, as best suites you needs. One pull runs a copper bristle brush as well as a wide long swab down the length of your barrel. You do not even have to disassemble the weapon to clean! Can be complete in seconds, and your barrel will be ready for another session on the range or in the field.
The Magnetic IPSC magazine was designed with the IPSC shooter in mind. The Magnetic system is available in three versions for unlimited choice of carry options. For stationary matches you can use the MAG1, for running matches with higher risk of losing a magazine you can use the MAG 2. The MAG3 and MAG3D (magnetic pouch double magnet) combines the IPSC pouch with the magnetic system to quickly add a spare magazine without losing another inch of belt space.
M5 PLUS BLACK
CALIBRE : 223Rem
BARREL LENGHT : 16”
TWIST RATE : 1/9”
UPPER : Machined from MIL SPEC forged- AL7075T6 Hard black anodized M4 Feed ramps,
LOWER : Machined from MIL SPEC forged- AL7075T6 Hard black anodized
BARREL : Hammer Forged Nitrited – Heavy profile – thread : 1/2 X 28 with A2 flash hider.
GAS SYSTEM : Direct gas impingement with gas block low profile
BOLT CARRIER GROUP: Prismatic heavy phosphate
HANDGUARD: Octagonal free float slim with full size picatinny – CNC machined – M-LOK System – 12”
TRIGGER: MIL SPEC
STOCK : MIL SPEC collapsible
The new Port Charger Universal Ghost 360 comes with two cups (vertical and horizontal) this allows the shooter to choose the location that best suits its characteristics.
The kit includes two different types of retention for the springs (strong and medium). The white screws regulate the intensity and the movement of the charger when it is inserted.
Xtreme No Rust is the solution to protect and lubricate surfaces to prevent from rust. This spray when used in combination with Xtreme Gun Cleaner is the perfect combination and base for lubing with Xtreme Ceramic Gun Lube.
After cleaning the gun with Xtreme Gun Cleaner you spray a fine mist of Xtreme No Rust over the gun. This will set as a protective film over the parts of your gun. With a clean cloth wipe off the axcess.
After this step you are now ready for the next level. Greasing the gun on its critical parts with Xtreme Ceramic Gun Lube.
In 400ml spray.
Flammable: Cannot ship by air or outside the EU. Due to air shipping regulations some solvents and CLP liquids cannot be shipped internationally.
Grips for the CZ Shadow 2 and SP-01 models, long version with checkering in Thick (79 grams) which adds 4 mm in thickness to the gun compared to Thin grips (49 grams).
Colored Aluminium grips for CZ Shadow 2 and SP-01 models in long version with checkering that is extremely grippy.
The checkering is CNC cut in the surface and has straight angles and is circular ( 360° directional grip) , therefore has more grip than any other on the market.
Matching the color is difficult on the picture due to no uniformity in devices so please look for the color on the group picture for closest resemblance of the original color.
Long grips are for guns that do NOT have a Magazine funnel fitted
Short grips are for guns that have a Magazine funnel fitted.
Completely cut from Aluminium on CNC machines.
Color is anodized.
Brass base pads for CZ Tactical Sport Magazines +1
Powder measure knob for the Dillon Powder thrower with click for easy adjustment.
Unlike other competitors, this knob is laser etched with 50 graduations giving the user reference points when adjusting. Two steel spring loaded balls generate smooth and repetable clicks. Easy to setup between multiple loads or even calibres, very precise 50 clicks per turn. Testing on pistol powders one click increments is about 0.015 grains. This is a very precise setting.
Simple installment and a tremendous help for if you are using different loads with visual scale.
The Dillon Factory screw requires a wrench when adjusting the amount of powder to dispense in your powder thrower. This knob is labeled with graduations for orientation and easily allows the user to hand adjust the powder dispenser without the need for tools. Works on Dillon 1050, 650,550, SDB and 900 presses.
Both parts are made from aircraft grade aluminum - anodized black color
1 x laser etched knob assembly consisting of one knob frame and one adjusting knob
1 x allen wrench for the grub-screws to fasten
Dillon Powder Bar shown only for reference and is NOT included.
Delicate Gun Cleaner, does not dry out your gun like some not dedicated products like brake-cleaner etc.
Should be used in combination with Xtreme No Rust and the specialy developed for each type of gun Xtreme Ceramic Gun Lube.
Simple to use. Take your pistol apart and just spray on the dirty parts and let it work in to remove the grease and dirt, spray some more to wash it off, let the gun dry, after a short time the dry gun can be sprayed with a mist of Xtreme No Rust, wipe off excess. Now you are ready for the next level, lubing your gun with the Xtreme Ceramic Gun Lube.
500 ml spray
Our Standard Division pistols come with all the bells and whistles that any IPSC Standard / USPSA Limited shooter needs. The Standard line is true to our mantra "ready to race out of the box", giving you all the features you'll need for competitive shooting from the get go. While it’s called the Standard, it's far from being so; every pistol is hand-built for accuracy and speed with the highest attention to detail and fitted by our master gunsmiths.
Each pistol comes with a full dust cover giving you the best balance between weight, stability and accuracy.
#Specifications
With a quick change assembly and a caliber conversion kit (sold separately), you can convert your RL 550 Series press from one caliber to another in less than a minute.
Includes:
Hammer - Single Action and Double Action
HAMMER SA DA for models CZ 75, CZ 75 Compact, CZ 85, CZ 97, CZ SP-01
BARREL LENGHT : 14,5”
Gauge with flip tray for gauging ammo on size and primer seating with 100 at once and with the help of the flip tray you can put them directly in your MTM 100 cases or Dillon Precision ammo boxes.
If you are serious about shooting, you are probably a reloader. So you are serious about gauging your ammo too. This tool will save you a lot of time, it will gauge 100 cartriges of 9mm Luger (9x19 parabellum) at once and with a twist and a flip you have all your ammunition nice and neat in boxes, ready for the range or storage.
Precision machined from Aluminium, black anodized.
Now also for our friends of the 9x21 IMI caliber.
The Dillon RL550C is the most versatile reloading machine in the Dillon Precision Products line. It will accommodate the widest variety of cartridges from 32 ACP up to 338 Lapua, 416 Rigby, and 460 Weatherby.
The RL550 has a manually indexed shellplate making it easier to master the various steps of reloading. Manual indexing also gives the operator greater control over each individual step in the loading process. Caliber changes are simple and require fewer parts than other machines which makes it less expensive to convert to another cartridge.
Reloading with Dillon’s RL 550 is Easy as 1-2-3! Most shooters realize that reloading is the most economical way to enjoy their sport, but many shooters are unaware of just how simple it is to reload. In fact, Dillon’s RL 550C is the easiest progressive loader in the world to learn to reload with. How can we make that statement? Simple. Since all of the reloading steps are performed with a stroke of the handle, there is less to remember (or forget) than with an old-fashioned single-station press.
No dies are included with the RL550!
BUL Blades with G10 Grip
420 Stainless Steel
-Full
-Modyfied
-Cylinder
Works also for Benelli Nova/Supernova
TTI Ultimate Fiber Optic Sights Set for Glock
*COMPLETE SIGHT SET WILL COME WITH BOTH RED & GREEN FIBER OPTIC RODS. INDIVIDUAL COMPONENTS WILL NOT INCLUDE FIBER OPTIC.*
Replacement Fiber Optic - https://tarantacticalinnovations.com/replacement-fiber-optic-rod/
- 1/16 allen key.
- POA/POI set at 15 yards for Full Sized Glocks using 124 grain ammo. If you put the sights on another Glock (Sub compact/compact) the POA/POI will change since the sight ratio has changed. Figure out what your given POA/POI is for other Glock models and remember it. Take into account what type ammo you are using, different grain and bullet weight can change the bullets flight path.
- The TTI Ultimate Fiber Optic Sights for GLOCK were designed to the specifications of Taran Butler and Robert Vogel, for optimum sight picture and the brightest fiber optic front sight possible.
- The fiber optic dot has been moved up to the very top of the front sight so that the shooter will not get confused with shooting off the top of the dot or a big/thick blade sitting above it - Which can cause the shooter to shoot either too high or too low.
- The fiber optic bar is NOT partially embedded into the floor of the sight. That means that more light reaches a greater portion of the circumference of the rod.
- Our shiny, stainless steel screw, reflects even more light right to the middle of the rod.
- As an added bonus, the front sight is designed to also be compatible with the GLOCK factory screw in case it is dropped or lost at the time of installation.
- The front of the rear sight is angled to allow one-handed charging from your belt, pants, or any other object.
- The front sight is .235" tall and .115" wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.
- The rear is .245" tall. The tighter .125" rear notch helps dramatically when shooting small steel and tight shots at a distance.
- Rear serrations cut down on glare. Both front and rear sights are billet stainless steel coated with Diamond Black Ion Bond (95 Rockwell hardness) for the highest level of rust resistance and the strongest finish.
MBX Super Lightweight Barrel weighs Only 12.5oz by itself, after we install our MBX Compensator and we have produced an ALL Stainless 1lb PCC Barrel that comes in at 16.1 inches for Legal Length.
A 5 piece Delron stroker kit consisting of a long and medium main contact shim & stack shims .100-.200-.300 to allow multiple combinations of stroke length allowing you to tune your preference in trigger load and cycle speed. For 9mm AR
The Marksman Performance Choice Trigger is a single stage, drop-in trigger – now available for pistol caliber carbines! Our 9mm/ PCC trigger is a drop-in trigger for any standard AR-15 style pistol caliber carbine as well as the Sig Sauer MPX PCC. Perfect for the competition shooter and designed to give you more customization options and improve your finger’s position on the trigger, Our MPC 9mm/PCC trigger shoe is 3/8” wide rather than the standard 1/4” width of a standard trigger. This gives it a greater tactile feel and together with our MPC Series’ Sentinel Trigger Guard it’s an unbeatable combination that performs like no other. The Velocity PCC Trigger comes in 4lb pull weight only.
SIG MPX PCC 9mm16 inčna cev, nabojnik 30rdspreklopno teleskopsko kopitokategorija B4
The DAA Carbon 1911 Grips are 0.250 inch thick panels which create a surface that provides the flawless grip so critical for recoil control. The carbon offers a striking hi-tech appearance, and unparalleled durability. The tactical design includes a wide, deep, thumb cutaway which allows you unrestricted access to any mag-catch installed on your 1911. The CNC machined Carbon material is light weight extremely touch and is totally resistant to oils and solvents. These carbon grip panels offer not only improved performance when shooting your 1911, but also an attractive dark-colored carbon “techy” appearance. Each set include 4 stainless steel torx screws, with a custom head design, a torx key and are packed in a display-friendly blister-pack.
FEATURES
*This magazine will not work in Taurus PT-111 G2 pistols
*This magazine will not work in Taurus PT-111 G2 pistol
fits for all 2011
fits for all 2011 models
We are pleased to offer the IDPA Magazine Belt attachment separately too, as an accessory to be used with other pouches of your choosing.
This attachment is made of PA66 Nylon with 30% glass fiber, making it extremely tough and durable. It can be used to attach the gear of your choice to any belt, with a thickness up to 8mm and a width of 1.5”-2.25” (39mm-57mm). The hanger includes a set of six spacers which allow you to quickly and easily adjust the width of the mounting slots to suite your belt.
The hanger includes the M5 mounting screw and our unique DAA serrated adaptor plate, which clicks into many DAA products, including our Racer pouches, most of our magnetic pouches, AR15 pouch quad loaders and more. But we also include a larger rubber washer which can be used to attach a Race Master pouch body to this hanger by placing the rubber washer between the hanger and pouch body instead of the serrated washer.
Please note: These IDPA pouches are designed to be used on IDPA legal leather belts, not on Velcro inner/outer belt systems as used in IPSC, which are not legal for IDPA use. It is very difficult to install these pouches onto our Premium belt, as they are not designed for use on that belt. It is not a recommended combination.
Available in Black only
The unique retention system that all DAA pouches utilize has made the Racer Pouch a very popular choice for competition shooters worldwide. However, to make it suitable for IDPA use, some changes and new features were required.
The IDPA Racer Pouch utilizes the same tested and proven Racer Pouch body on an entirely new hanger that allows the slide-onto-belt functionality required for IDPA competitors. The hanger is designed to position the pouch closer to the body, making it suitable for IDPA, but also with an eye to the carry and self-defense markets.
The thumb-adjustable wheel is removed to meet the IDPA rules. Tension adjustment is still possible by means of a pressure screw that can be turned with a hex key, accessed from the back of the pouch body.
The IDPA Racer Hanger is ideal for threading onto medium to thick belts with a width ranging from 1.5” to 2.25” (39 mm to 57 mm), using a set of included click-in spacers. For each belt width use the appropriate spacers to get a solid and secure fit. Interchangeable pouch inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&P mags. A single stack spacer is also available as an accessory.
Building on the success of the Magnetic Single Stack Pouch, we are pleased to offer the same configuration in two new models, a 2011 wide body and a CZ/TAN double-stack magazine size.
(Note that the wider CZ TS mags should select the 2011 model!)
Two 20 mm-round magnets hold the magazine firmly inside the pouch track, allowing for secure retention and yet enabling a smooth and effective magazine release. The base on the pouch is the same as used in the Racer line, providing for two height positions and a step rotation adjustment. The thin steel plate at the back of the belt-hanger minimizes separation between the inner and outer belt. Perfect for these pouches, which are often mounted close together on the outer shooting belt. This pouch configuration is ideal when wanting to mount pouches close together and allow easy access to multiple magazines without having to reach too far back.
Available in Black only.
Most AR-15 mag pouches have their roots in tactical or military applications. Not this one! DAA set out to create a totally new competition orientated pouch for the AR-15, and we are very proud of the result, the DAA AR-15 Racer Pouch!
>span class="s1">Supplied as standard with our Alpha Rail System, the pouch can be adjusted for tilt or exchanged for a pistol pouch or shotshell holder.
Adjusting for various shell lengths can be done on the fly, without removing your rig, and without any tools. Simply turn the large tension wheel and the upper support slides up and down the rail to match your shell length.
Colored laser-cut insert plates decorate the upper and lower supports and are available in several colors.
The DAA Single Stack Magnetic Pouch is our latest magnetic pouch design, offering an ultra-compact and ultra-efficient magazine holding system for single stack shooters.It positions the magazine only in the 90 deg “away from the body position” and is an excellent option for shooters who choose to carry their magazines this way, as many single stack shooters do.The DAA Single Stack Magnetic Pouch utilizes two small yet powerful magnets that hold the magazine firmly in place while allowing it to rest inside its supporting track. The track guides the magazine in and out of the pouch and prevents it from accidentally being dislodged. The release achieved from this magnetic pouch is the smoothest of any of our magnetic pouches, partly due to the smaller contact area with the single stack magazines.The belt hanger is the same as that used in the Racer pouches - the same minimalist steel plate design which eliminates separation between your inner and outer belt. The pouch can be adjusted for tilt in very small steps, allowing you to find your preferred angle. Once the correct angle is set and the center screw tightened, the serrations in the connector piece lock up, preventing any possibility of the pouch rotating until the center screw is loosened several turns.
Versatility & Value!, L/H & R/H.Fits Most Popular Pistol Magazines.This Pouch is fully Ambidextrous giving Left & Right handed shooters the same benefits.Supplied with Inserts to fit.Hi - Cap Mags "Para, STI, Bul, SV Kimber etc."9mm Box Mags "Popular 9mm & 40 Double StackMags incl. CZ, Browning, Beretta 92, Tanfoglio etc."Glock "all Small Frame Glock Mags, Excluding45 acp & 10mm auto.Tension adjustment & slick insert material ensures.Fastest mag changes Angle & Height adjustment.
A set of two loaders for loading .22LR cal. single-stack wider mags with a projecting side-button, such as:
Master lock secures the machine cover in place, preventing "unauthorized fingers" from playing with your machine
A set of two loaders for loading .22LR cal. single-stack narrow mags with a projecting side-button, such as:
Increase the stability of your reloading bench with Dillon's new Strong Mounts. These heavy gauge steel Strong Mounts increase the machine's "foot-print" to over 10", spreading the load over the bench instead of stressing the leading edge. Strong Mounts raise your machine 8", providing a comfortable work height for people who prefer to stand while reloading. All mounts come with all the fasteners necessary to mount your machine and are coated with a durable black wrinkle finish.
The Dillon Precision Universal Decapping Die is a standard 7/8"-14 die with a solid, hardened steel, decapping pin in an unlined steel die body. The Universal Decapping Die allows you to remove spent primers without any resizing of the brass.
Dillon's new Toolholder fits your Square Deal B and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes the complete allen wrench set plus the new Square Deal bench wrench.
The Dillon Magnum Rifle Powder bar throws charge weights from 50 grains up to approximately 72 grains of extruded powder, or up to approximately 82 grains of ball/spherical powder
The Range BenchLoader™ loaders is a heavy-duty industrial 5.56 / .223 cal magazine loaders made to load a magazine in a single hand stroke. It is intended for daily loading of hundreds of magazines at shooting ranges and armories. It totally eliminates fingers pain and injury, shorten loading time, and keep the magazines lips intact.Loads all AR15 / M4 compatible 5.56 / .223 magazines, like:- M16 / AR15 / M4 USGI (NATO STANAG 4179)- Magpul PMAG- SCAR 16- H&K metal 416 / SA80- SureFire 60 & 100 rd- Beretta AR 70-90- Lancer *- and all others
The 22UpLULA™ loader & unloader is made for loading .22LR wide body mags. 1/2”, like .22LR 1911 mags and other .22LR converted mags. It has the body width of our UpLULA™and has a narrower metal beak designed for .22LR rounds.(It will not load .380 to .45 cal. mags. !)The 22UpLULA™ loader loads the following mags:Single Stack / 1911-wide1911 – Advantage Arms SS 10rdGSG-1911 10rd (Made in Germany) SSGSG -Colt Conversion kit mag 1911 Govt 10rd steel SSKimber – SSNightHawk Custom .22 Conv mag SSSIG – 220 SSWilson Combat polymer 422M-P 10rd SSDouble Stack / wide bodyBeretta – M92/96 10rdCZ – 75 Kadet 10rdGlock 17-22 – Advantage ArmsGlock – Advantage ArmsGlock – Advantage ArmsGlock 19-23 – Advantage ArmsGlock – Advantage ArmsGlock – Advantage ArmsPara – Advantage ArmsSIG – 228/229SIG – 226STI – Advantage ArmsTanfoglio Force 22 L & PTS TSG-22 10rdTS TSG-22 15rdWitness 9/40 10rd STD22
The BabyUpLULA loader is a military quality personal pistol magazine loader for 0.22 to .380 caliber rounds. It is a radical new design, which allows for easy and smooth loading of practically ALL single and double stack pistol magazines in these small calibers (for larger calibers use the UPLULA).While loading you can support the base of the magazine on your body/thigh or on a table when available.Features:- Loads all .22-.380 caliber magazines- No inserts, spacers or adjustments at all! One size fits all.- Easy and quick loading; Rounds just drop in with no fingers pushing or forcing the rounds.- Up to one round per sec. loading rate, with some practice.- Fits in your hand and pocket, weighs only 50 grams.- Highly durable - constructed of the best reinforced polymer.- No more strain or pain when loading those mags!- Load hundreds of rounds, easily.Does not load the following:Converted .22 mags. .22LKimber .22 .22LRS&W 22A/22S .22LRBeretta U22 NEOS .22LRWalther P22 .22LRBrowning .380 BDA .380Beretta 84 .380 .380Beretta 81 .32 .32Tuaras PT380 .380Colt ACE .22LRGSG 1911 .22LRRuger SR22 .22LR
This new exciting product from Maglula is the most compact and versatile AR15 loader ever introduced. The StripLula will fit all plastic and metal AR15 magazines, clip onto the top lips and allow you to quickly and effortlessly load your mags.
It can be used to load ammo packed in stripper clips (12 seconds to load 30 rounds) or it can be used to load individual rounds(40 seconds to load 30 rounds).
It can even be used as a simply unloader, allowing the unloading of a 30 round magazine in 15 seconds flat.
If you shoot an AR15 – you’ve to have one of these!
The LULA loader & unloader is a military quality personal magazine loader and unloader. It facilitates both loading of loose rounds into a magazine and unloading them out of the magazine. It does so quickly, safely and comfortably. Usable for tens-of-thousands rounds.
Advantages: Both Loads AND Unloads FAST! 35sec to load 30 rd, 5sec unloading 30 rd. Safe on fingers and magazine, absolutely no sore thumb! Pocket size, just drop on in your range bag! Durable, made of the best quality glass-reinforced polymer Weights approx. 38grams (1.3ounce) Constructed of only two parts ISO9002 manufacturing Chemicals resistant
Other advantages: A huge time saver when several magazines need to be cleaned (unloaded and reloaded). Needs no dexterity or training to use, suites right and left handed users Needs no maintenance at all. Useable also in zero light environment. Useable with gloves in freezing weather. Loading 1. "Click" the LULA loader over the open end of the magazine; 2. Have the LULA loader and magazine face upwards; and 3. Move the lever to-and-fro as you feed rounds into the magazine.
Unloading 1. "Click" the LULA loader over the open end of the magazine; 2. Have the LULA loader and magazine face downwards; and 3. Move the lever to-and-fro as the rounds expel out of the magazine.
That's it !
As most serious IPSC and USPSA pistol shooters know, preventing slip in your grip is of utmost important for high-speed accurate shooting. A grip-enhancement lotion is one of the best ways to achieve that anti-slip, without the need to apply excessive force to the grip. Especially in wet conditions or in extreme heat, sweating palms can really hurt your performance. But with a few drops of the new GRIPZ by DAA, applied just before you shoot, your palms remain dry and your grip secure.
GRIPZ by DAA is a grip enhancer designed by shooters for Shooters. Supplied in a plastic bottle with a practical “Snap-cap” type closure, that ensures a good seal and quick, easy, one-handed access when needed. GRIPZ by Double Alpha does not dry as white in color as other competing products, and will not rub off as easily onto your clothing and pistol grip. It will be cleaner to use than other leading grip-enhancers popular in our sport.
GRIPZ is silica based grip-lotion, diluted with alcohol and stabilizers for the ultimate performance and longevity. Each bottle holds 75ml (some 20% more than competing products).
Dillon's NEW Concealed Carry Tote accommodates all the tools you need to survive the urban jungle. This low-profile carry case looks like an ordinary briefcase or laptop case, but it's designed for your handgun as well as your PC! It's made of rugged nylon fabric, with heavy-duty zippers on all compartments. The main compartment is 15" x 11.5" x 3" deep, with pouches in back and front. The hidden gun pocket is held closed with hook & loop fasteners for quick access, has a 14.5" opening and is 10.5" deep. The front pockets are 6.5" x 8" x 1.5" and feature inner pockets for flat items. There is also a zippered compartment on the back of the case sized to accommodate a ballistic armor plate.
A large piece (15 x 30 cm) of top quality 3M grip tape, perfect to use on pistol grips, slides, mag base pads or anywhere high friction long lasting grip tape is required.Available in Black only.
Made of sturdy 0.75mm thick hard transparent plastic, these overlay gauges are a “must have item” in every range bag! They are the size of standard credit cards and so fit easily into any wallet or pocket. Include precisely drawn caliber circles and a handy 50mm side ruler for measuring gear’s distance from the body.
Dillon's new Toolholder fits your XL 650 and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes a complete allen wrench set plus the one inch bench wrench.
Making the best even better!The replacement Silicon Gel Kits, include 2 Silicon ear Pads and 2 new insulation cushions. It is important to replace the cushions from time to time, to ensure good hygiene and best sound performance. This upgrade kit gives you extra cushions, in addition to the main item - the new silicon Gel Pads.You need to try these to best appreciate them. The silicon in the pads is in a gel state, not liquid, so even if punctured it will not leak. The Silicon molds itself around the contour of your head, offering even more comfort and better sound protection that the normal sponge based ear pads.The Silicon Gel pads really shine when you use the ear protection with shooting glasses, as we usually do. They mold themselves around the arms of the glasses, improving sound protection and preventing pressure of the glasses against your head.The Sordin Silicon Gel Ear pads can be used with all the Sordin models offered here - the Supreme Pro, Pro-X and Pro+3. The original pads are easily replaced, and can be kept as spares for future use. No modification is needed to the ear defenders when using this silicon gel upgrade kit.
Lets you hear what you need to hear. Protects you from what you don't.
Enter the ZemZone where loud damaging noise is suppressed yet you can hear the conversation of others around you. You will improve your concentration, be more productive and feel better at the end of the day. The ZemZone. It's the safe sound world for your ears. A quiet revolution at work, at play, at home Improved Performance
Greater Comfort
Increased Safety
Convenient
The DAA Universal Cleaning Kit is a truly comprehensive kit including all you need to maintain both rifles and pistols. The kits in designed to support 6 calibers, including these rifle calibers: 0.177, 0.223, 0.308 , and these pistol calibers: 9mm, 0.40 and 0.45.
The kit is packed in a sturdy Tactical-type case, made of heavy-duty D-600 material and including a large top-quality wrap-around zipper. Zipper heads have long cord heads for easy access. The case itself is Molle-ready, and can be attached on the outside of many bags and tactical packs. Multiple Molle-Pattern Velcro tabs on the front, allow you to add name tags, patches or other small attachment items. The case includes a rubberized DAA logo on a front Velcro tab.
Inside the kit is a multitude of accessories, all neatly packed and held in place with dedicated pockets and straps. The kit includes the following items:
A set of 4 fiber reinforced hard-nylon hooks, perfect for reaching into those hard-to-get-to corners and indents in your firearms, for cleaning and maintenance.
The plastic material used ensures that there is no risk of scratching or damaging your valuable firearm parts as you work on it. The assortment of end tips and shapes provides you with options to find the best form for the job at hand.
Packed in a plastic sleeve, with a cardboard header, suitable for display hanging.
A silicone cloth is one of the most useful items to have in your range bag. It has multiple applications for IPSC shooters: First and foremost it can be used to improve the feeding reliability of your magazines. Many top US shooters run their bullets through the silicone rag before loading the ammo into the magazine. When slightly coated with silicone, the bullets roll better in the magazines, and magazine feeding problems are eliminated. You can also run the silicone cloth through your mag tube when cleaning. Use the cloth to wipe down the outside of your gun and magazines to prevent rust and remove finger marks. The silicone cloths come packed in individual zip bags which prevent the rag from drying out. Only 4 Euro each, or take advantage of our promotional price - and order a pack of 5 for the price of 4 (see Combo: Silicone Cloth 5 Pack).
The Wide 2" Belt Hanger for Alpha-X Pouches, is a complete fully-assembled belt hanger for the Alpha-X pouches – enabling the user to attach these pouches to a wider belt. The wide bracket and included spacers will accommodate up to a 2” wide belt, and the two ¼” spacers make it easy to use on a 1.75” belt or a 1.5” belt as well.
The hanger is complete, including the steel bracket on the back with the two removeable spacers, and the ball joint for attachment to the Alpha-X pouch body.
Pouch body and pouch-spacers are not included.
A characteristic of virtually all progressive reloading machines, regardless of brand, is that the dies are set rather close together. When you are first setting up a "naked" machine, there is plenty of wrench room, but if you have a need to adjust a die afterward, it often requires a delicate touch to maneuver a lock ring on a crowded toolhead. Dillon Precision has addressed this in two ways. We now offer new 1" die lock rings and a 1" Bench Wrench to fit them. This combination gives much more room to re-adjust dies after they're already mounted. The opposite end of our new wrench is a 7/16" box-end for adjusting the Powder Bar of any Dillon Powder Measure. Our new lock rings fit any standard 7/8" x 14 dies.
- R-edition Lightweight hammer 12835
-R-edition Disconector 12517
-R-edition Sear 12417
all parts are Fully Machined SS
