Select your country
Please select your country
Cart is empty
he DAA Output Chute can be attached to any reloading press, hanging onto the same bracket which usually holds the Akro-Bin, and replacing it.
The long, 120cm (4ft) feed spring enables you to run the ammo down to a container on the floor, sparing you the need to empty that bin as you reload, and uncluttering your reloading press.
Some shooters prefer to have a muzzle support on their competition holster. This is an indisputable fact.While most users will find that the Race Master holster functions perfectly without the additional muzzle support, there are some added advantages to using this extension: The muzzle support prevents the gun from being dislodged upwards, which could happen if bumped on the shooters thigh, or against a prop, during a walkthrough. If the holster was left unlocked, the gun can be dislodged. The muzzle support prevents this from happening.
Some Mr.BulletFeeder users have asked for the option to extend the output feed spring, to allow them to position the collator further away, or perhaps position one collator between two presses and use it to alternately feed each machine.
To meet this request we are pleased to offer the output springs and a screw-on adaptor cap which will allow you to attach to your current spring and extend it up to another 38cm.
Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machinesand the large size (12mm inner diameter) as shipped with the pistol calibers.
Note that some “do it yourself” supports for the spring will be needed to prevent it sagging under the weight of the bullets. You do need to keep the tube running downwards and prevent bullets from “pooling” in a sagging loop.
The 11-Coil (125-140mm mags) DAA 2011 magazine springs are made from hi-quality spring wire, and carefully formed and manufactured to maximize reliability, capacity and longevity.
The DAA Deluxe Magnetic Pouch utilizes two powerful 32mm magnets to hold the magazine securely in place while providing a smoother release than that achieved from the larger standard Magnetic Pouch. The support side walls allow us to use smaller magnets which in turn make the pouches more useable as an all-round pouch for every day use, and not just as a designated pick-up Pouch.For those shooters who like the simplicity and minimalist look of an open magnetic pouch - this is the perfect choice! The slim body make it possible to position pouches closer together while still leaving enough room to reach down and grab the magazine correctly. The lack of external or front pouch walls allow the pouches to be spaced that much closer together. Perfect for Standard or Production where one must wear the pouches behind the hip bone.The pouch is attached to our new model belt hanger, which locks securely on any 1.5" belt, clamping down to hold tightly even on thinner belts. The pouch can be swivelled around the centre screw (lower magnet's middle) to angle the pouch as designed. The off-centre mounting point on the hanger offers the option of two heights to choose from. The pouch body is machined from solid Delrin and so is tough and durable. Available in Black only.Available for Right-Hand users only.
The 2018 Hanger Assembly for the Mr.Bulletfeeder by DAA ships as standard with all new units leaving DAA as of Jan 2018.
Should you wish to upgrade your current hanger assembly (the one with the round Delrin pucks and aluminum rods) you can do so by purchasing this new hanger separately. It is reverse-compatible with all previous Mr.Bulletfeeder by DAA units.
The new hanger is a simplified design, which makes assembly and adjustments to the tilt angle easier and faster to make. The Horizontal aluminum bracket clamps directly onto the motor gear box, allowing for easy assembly on either the left or the right side of the collator, to accommodate your specific position mounting needs.
The vertical piece hangs over the side of your case feeder, and connects to the horizontal bracket by means of a large M8 bolt, which can be loosened and rotated for tilt adjustments.
Sturdy attachment to the collator, a simplified design with fewer parts, thick aluminum profiles and way fewer screws make this hanger simpler and easier to setup and adjust.
Note: Machine NOT included - only Hanger.
The low-profile, yet rugged aluminum housing surrounds a large viewing window that makes for a wide field of view and sight picture with next-to-no obstruction for rapid shooting transitions and target acquisition.
The Dropper Assembly is needed for shooters who wish to set up a second tool-head in the same caliber, and wish to quickly transition from, say, 9mm to .38super. Or from one 9mm bullet to another. A change is needed to the collator parts, and if a 2nd tool-head is to be used on the progressive reloader, it is quicker and easier to leave an adjusted Mr.Bulletfeeder dropper on each tool-head. This allows for quick swapovers, without the need to calibrate or adjust the dropper. Note that in most cases you will need to purchase an additional Powder Funnel for your second tool-head’s powder measure, as our expanding powder funnel is required for troublefree reloading.
Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machines and the large size (12mm inner diameter) as shipped with the pistol calibers.
Many PCC shooters use extended Glock Magazines, often with long base pads added for even more capacity.
To ensure the best possible retention in our Racer and Race Master mag pouches, we are pleased to offer this dedicated extended Glock Side spacer.
Simply assemble this spacer instead of your short one, and allow the bottom of your long mag to extend out the bottom of the pouch body, for a more balanced more secure retention.
The long spacer offers three hole positions in which to place the stopper, giving you the ability to experiment and decide for yourself what the best depth for your magazine is.
NOTE: this spacer is not compatible with the Alpha-X line of pouches. Magazine and Magazine Pouch not inlucded!
DAA XL650/750 Debris-Out Casefeeder Adaptor, which replaces the original Dillon case feeder adaptor on your press, the slots cut in the pipe allow the debris to fall out the sides onto the small collection tray and the chances of a jam-up are greatly reduced.
Stop switch enables you to lock the case feed shuttle back to prevent cases from feeding into the shell plate when cycling the press. Easy installation. Just screw with two original bolts. Built in hinge made for super easy usage, cycle machine to down position and enable stop switch. Built in bulge that locks switch in case ON position. Great for clearing the shell plate, maintenance, setup, or any time you don’t want cases to feed. Â Made from high quality steel. This product is suitable for Dillon 1050 only.
Metal Stencil for Marking Ammo:
Kit consisting of
Floating trigger pin, Barrel bushing SP-01, Ultra lite set, Race hammer kit, Sear spacer, Trigger return spring, Hammer pin, Shadow 2 only disconnector.
Ace's skeletonized stock for the AR-15 rifle. Closed cell foam overtube provides an extremely comfortable cheek weld. Uses A2 buffer tube, rifle length buffer and rifle length buffer spring (NOT INCLUDED). Foam overtube, buttpad and all needed mounting hardware included. Length 10" Weight 11.2oz
This stock uses Ace original soft foam overtube for the ultimate cheek weld. A billet machined gusset reinforces the receiver extension tube at its weakest point directly behind the receiver. Precision machined aluminum butt clamps directly to the RET and provides a machined in sling mount.
Seekins Precision, Safety Selector Kit, Red Finish
90 degree standard throw lever
60 degree short throw lever
Available in black or color anodize
Drop in replacement for Mil-Spec selector switch
Fully ambidextrous
Compatible with Ruger Precision Rifle
he Seekins Precision DNA Charging Handle offers a full body and textured grip surface to improve user controls. Our team set out to create a product that would not only offer ergonomic fit and function, but also aesthetic design. Crafted in a climate controlled laboratory by a team of scientists who were only allowed to use their right hands, we can proudly say the DNA handle is the most non-ambidextrous charging handle in our product line up. Really, it's just a charging handle, a very non-ambidextrous one. Enjoy!
Straight single action aluminum trigger with pre-and over-travel adjustment. All Cajun Gun Works supplied triggers include a 1.5mm allen wrench for your convenience. This trigger is now a Cajun Gun Works product proudly “Made in the USA”!
TECH TIP: This is a “conversion” trigger and completely disables the double action feature. When installing this trigger you will need our TR-PIN as a replacement for the throw away CZ OEM trigger pin, and our SP starter punch for removing the CZ OEM trigger pin. Remove the disconnector when installing this trigger. This trigger cannot be used in any CZ decocker.
barrel bushing for the “standard barrel” 9mm manual safety and decocker pistols. Fits: 75B in 9mm (will not fit the 75B .40, see our 7510X), P-01, PCR, 75B Compact, 85C and 85B. Made from 4140 and heat treated to RC45. Reduces barrel muzzle play to -0- at lock-up. This is a direct replacement for the OEM bushing. Fits .504” OD CZ’s. USPSA Production Approved.
NOTE: Some minor fitting may be required typically at the #46 retaining pin groove.
IDPA Production Legal upgrade kit for the manual safety CZ 75 models. Fits all “classic” lock work manual safety 75 and 40B, including SP-01. Everything you need excluding tools. Our starter punch, part number SP is highly recommended. Absolutely No Substitutions.
IDPA production legal, full upgrade kit. Includes everything for a 100% compliant competition ready drop-in package for all manual safety 75 series, 75B, 75B Compact, 40B, and SP-01, etc. NOTE: Recommended “Competition” and “Race” gun use only.Produces a 3# or less SA pull weight, not recommended for self-defense use. For all other applications, see our 75100 and 75110 upgrade kits. Absolutely No Substitutions.
Shadow 2 Reach Reduction Kit with ultra-short reset now USPSA Production approved. Cajun Gun Works’ famous RRK that permanently re-positions the trigger rearward with the hammer fully lowered an amazing 5 mm’s and reduces single action pre-travel dramatically. Includes our “old style” stainless steel 85C trigger “Made in the USA” with pre and over-travel screws so you can custom tune to your CZ.
This not only relocates the trigger, but it also doubles as an ultra-short reset for single action.
Includes 2 different hammer pins (1 x HPIN and 1 x 75009) so you can be assured a secure attachment to either the factory hammer or Cajun Gun Works hammer. Lifetime warranty to the original purchaser
New Shadow 2 ultra-short reset disconnector. After extensive testing, we have engineered a new disco just for the Shadow 2. This part will drop into most S-2’s and require no fitting, however, due to the timing variations from pistol to pistol, some very slight fitting may be needed on some S-2’s.
This ''Follower Kit'' includes: A "Grams Format" follower (CL) & (13coil) spring. For use in CZ "large frame" (Tactical Sport/Checkmate), 9x19 or 40&w magazines, that measure up to 171mm long (with a base pad attached).
A truly ergonomic, shooter focused flat top grip for AR platform rifles and chassis systems. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip comes with the patented Gapper™ for increased comfort. Very similar in size to the Original ERGO Grip
Knights Armament Company, Top Rail Rubber Thumb Rest, Fits Picatinny, Black Finish
BUTTSTOCK, PISTOL GRIP(NTG), & M-LOK VERTICAL FOREGRIP COMBO - MIL SPEC +®
PISTOL GRIP
The new Daniel Defense pistol grip is an improvement to the old standby A2. We designed our grip with ergonomics and controllability in mind. Our grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel. This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. Installation is simplified by the fact the integral trigger guard doesn’t require a roll pin so there is a reduced chance of damaging the lower receiver. A soft touch overmolding section enhances grip, wet or dry.
ELF AR-9 Match Trigger
Product Description
Many shooters have to wear their hearing protectors for a long time. The range of hearing protectors help ensure you’ll have no problems staying focused. The low, two-point fasteners allow an even distribution of pressure over the whole cushion area, to help ensure the ear muff stays in place even during sudden head movements or positioning the weapon. This feature also helps ensure a snug fit without compromising comfort and protection for high quality sound reproduction.
Dry-firing is one of the most effective methods to improve you shooting skills. It is cheap – no ammo is required. It is convenient – you can do it in the comfort of your home (don’t let the neighbors see you…). And it is an excellent way to build subconscious skills without the distractions creates by target feedback – good or bad hits. But in order to make your dry-fire practice as productive as possible, it needs to be as realistic as possible. You need to use YOUR gear, your holster and gun, and you need to make sure that you do GOOD practice only. Which means pulling the trigger only when the sight picture is correct!
- IPSC: This DAA Dry-Fire Target Set consists of 20(!) precisely scaled down IPSC Classic targets. When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at distances of 15, 20 and 30 meters.
- USPSA: This DAA Dry-Fire Target Set consists of 17(!) precisely scaled down USPSA Metric targets. When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at distances of 15, 20 and 30 meters.
A replacement threaded die body for your Mr.Bulletfeeder by DAA Dropper. This threaded body is compatible with all calibers.
The only brush designed with your magazine in mind. Once you own one of these brushes, you will never clean you magazines any other way. One tool to dismantle most magazines and clean them. Making the cleaning easier - which means you will do so more often. And that means you will suffer less malfunctions. Few things are more important to gun reliability than keeping your mags clean!
The CED Carbon Fiber EVA Pistol Case combines all the great features desired in an EVA a case. A hard, protective and cool looking shell. Zippered and lockable with a TSA approved combination lock making it ideal for air travel. A handle for easy carry, and dense eggshell foam for complete protection of your valuable pistol. Will fit one open class or two production pistols.
How to set your private combination:
Available in Black Carbon Fiber finish only.
Dimensions: 32cm x 21cm x 8.5cm (12.8” x 8.4” x 3.4”)
YELLOW Carbine Spring recommended for most Standard Applications min 115 Power Factor up to 145 Power Factor.
The Lyman QwikDrawTM Barrel Cleaning Rope is a fast, all-in-one cleaning tool that reduces your cleaning time to a fraction of what it would be with a traditional cleaning rod.
Product Details
The Magpul PMAG Ranger Plate is a floorplate replacement for all 7.62x51 PMAG LR/SR GEN M3 magazines that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.
Made in U.S.A.
Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included.
Features
Similar in concept to the Magpul Ranger Plate™ for AR15/M16 magazines, the SpeedPlate allows for rapid magazine extraction and positive handling. Protects the base of magazine from impact.
The SpeedPlate replaces the floorplate on all factory Fully Metal Lined (FML) GLOCK 9mm and .40S&W double-stack pistol magazines.*
*NOTE: SpeedPlate is NOT compatible with the Magpul® GL9 series of PMAGs®.
The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc.Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability and included Pin keeps upper in proper position.The BEV can also be turned over and used as a mag well vise block to support the lower receiver during maintenance, etc.Made in U.S.A.
Specifications
BEV™ Block – AR15/M4
The PMAG Minus 10 Round Limiter installs in 20 or 30 round GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.
NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.
American-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric and SAE bottle caps.)Made in U.S.A.
Armorer's Wrench – AR15/M4
NOTE: Not compatible with larger pistol-style receiver extension tubes
As a replacement for traditional three-piece gas rings, the JPEGR-223 utilizes a one-piece design similar to the McFarland rings. Unlike the McFarland rings, though, our precision-ground gas rings are engineered to precisely suit small-frame carrier group components such as our own JP EnhancedBolt™.
JP Enhanced Reliability Spring Kit
This spring kit will yield a 3.5-4.0 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger components.
Application: Use of this spring kit allows for use of ammunition with low-sensitivity primers such as those found in NATO-spec and various foreign-manufactured ammunitions, but in the case of large-frame ARs and duty/defense rifles, domestic-manufactured ammo is strongly recommended to ensure 100% ignition reliability.
The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing.
Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.
MBX Offset Scope Mount
The MBX Offset Scope Mount for full size C-More. Designed for fast and easy "heads up" acquisition when installed on a rifle for PCC competition and steel challenge.
MBX 9mm PCC Compensator "Patent Pending" Designed specifically for competition shooting to achieve the best performance possible with lowering gas volume on Pistol Caliber Carbine.
Mil-spec 6-position buffer tube manufactured from 7075 aluminum with black anodized finish.
Tube only; endplate and castle nut not included
Nordic Components, Extended Magazine Release for 10/22 Rifles, Black Finish
The Timney replacement trigger for the Sig Sauer MPX is the latest in the Timney lineage of semi-automatic, replacement triggers. Timney collaborated directly with SIG on the design and features of the MPX drop in replacement trigger.
The trigger, hammer, and bridge are constructed of heat-treated steel. The housing is machined from 6061 T6 anodized alloy and the trigger is heat treated steel and coated with black oxide .
The trigger is single stage and features a straight blade. The Timney replacement trigger for the SIG MPX is a self-contained, 100% drop-in trigger ready to install in your rifle for an exceptionally smooth, crisp, trigger pull with no gunsmithing, fitting, or adjusting required.
The MPX replacement from Timney features a hardened steel bridge to protect the trigger components from the vigorous bolt blow back characteristics prominent in Pistol Caliber Carbines. The single stage trigger features a non adjustable trigger pull weight of 4.5 pounds. Drop in installation is simple once the Factory trigger is removed, you will reuse the factory Hammer and Trigger pins.
Set screws are located in the housing to lock the trigger in place and prevent the pins from walking out of place. The Timney drop in MPX trigger works with the factory safety as well as many aftermarket replacements, especially the Timney 49r ambidextrous, short throw safety available here on the website.
The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon.
SUPER CHARGING HANDLE (SCH®) 5.56
The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized and are available in black
SUPER DYNAMIC 3 GUN (SD-3G) TRIGGER
The Geissele Super Dynamic 3 Gun (SD-3G) Trigger is based on the S3G Trigger. Like the S3G, the SD-3G has a shortened pull length and a lightning-quick reset to give it a unique, hybrid trigger pull that is a cross between a traditional two-stage and single-stage trigger while still retaining the safety and robustness of a two-stage combat trigger. The SD-3G’s flat trigger bow further enhances the trigger’s performance by reducing the perceived pull weight and improving the trigger’s tactile feedback to the operator making it ideally suited for 3 Gun competition shooting.
The Geissele Hi-Speed National Match Trigger Series is designed for NRA High Power Rifle competition with highly modified match-grade AR-15-type rifles. The Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets are all included in this purchase.
Desgined for use with 22LR AR conversions. 25rd Capacity.
Super Dynamic Enhanced SD-E AR Trigger
The Geissele Super Dynamic-Enhanced (SD-E) Trigger featuring an exclusive flat trigger bow, is a finely-tuned two stage trigger providing enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger.
Rifle lenght gas tube kit.
Parts Kit, AR15, Bolt Rehab
Due to popular demand we are now pleased to offer you the DAA Super-Strong magnets, sold separately, for mounting on the DAA Alpha-X / Race Master pouches, or any other type of base you care to use them on.These Zinc plated magnets are incredibly strong, offering approx. 87kg of pull strength. With these magnets, you can slap on that magazine quickly and confidently and know that it will not fall off as you move. The magnets measure almost 50mm in diameter, and are 12mm thick (with their casing).Fitting to an Alpha-X / Race Master Pouch:In the front of the pouch there is a 4.2mm hole, which can be used to attach the magnet to the pouch body. You will need to tap (thread) this hole using an M5 Tap. Do it carefully and slowly as the thread needs to be precise, as there is only a 2.5mm side wall to work with. once done, simply screw the magnet directly onto the front of your leading pouch. We suggest using a little LockTite on it, to keep the screw from opening.Do not worry if the tip of the screw protrudes slightly into the pouch body - the magazine does not reach down far enough to hit it.
