Select your country here
Please select your country
Il carrello è vuoto
The Dillon RL550C is the most versatile reloading machine in the Dillon Precision Products line. It will accommodate the widest variety of cartridges from 32 ACP up to 338 Lapua, 416 Rigby, and 460 Weatherby.
The RL550 has a manually indexed shellplate making it easier to master the various steps of reloading. Manual indexing also gives the operator greater control over each individual step in the loading process. Caliber changes are simple and require fewer parts than other machines which makes it less expensive to convert to another cartridge.
Reloading with Dillon’s RL 550 is Easy as 1-2-3! Most shooters realize that reloading is the most economical way to enjoy their sport, but many shooters are unaware of just how simple it is to reload. In fact, Dillon’s RL 550C is the easiest progressive loader in the world to learn to reload with. How can we make that statement? Simple. Since all of the reloading steps are performed with a stroke of the handle, there is less to remember (or forget) than with an old-fashioned single-station press.
No dies are included with the RL550!
Gauge with flip tray for gauging ammo on size and primer seating with 100 at once and with the help of the flip tray you can put them directly in your MTM 100 cases or Dillon Precision ammo boxes.
If you are serious about shooting, you are probably a reloader. So you are serious about gauging your ammo too. This tool will save you a lot of time, it will gauge 100 cartriges of 9mm Luger (9x19 parabellum) at once and with a twist and a flip you have all your ammunition nice and neat in boxes, ready for the range or storage.
Precision machined from Aluminium, black anodized.
Now also for our friends of the 9x21 IMI caliber.
M5 PLUS BLACK
CALIBRE : 223Rem
BARREL LENGHT : 14,5”
TWIST RATE : 1/9”
UPPER : Machined from MIL SPEC forged- AL7075T6 Hard black anodized M4 Feed ramps,
LOWER : Machined from MIL SPEC forged- AL7075T6 Hard black anodized
BARREL : Hammer Forged Nitrited – Heavy profile – thread : 1/2 X 28 with A2 flash hider.
GAS SYSTEM : Direct gas impingement with gas block low profile
BOLT CARRIER GROUP: Prismatic heavy phosphate
HANDGUARD: Octagonal free float slim with full size picatinny – CNC machined – M-LOK System – 12”
TRIGGER: MIL SPEC
STOCK : MIL SPEC collapsible
Hammer - Single Action and Double Action
HAMMER SA DA for models CZ 75, CZ 75 Compact, CZ 85, CZ 97, CZ SP-01
The installation must be done by an experienced gunsmith.
With a quick change assembly and a caliber conversion kit (sold separately), you can convert your RL 550 Series press from one caliber to another in less than a minute.
Includes:
Our Standard Division pistols come with all the bells and whistles that any IPSC Standard / USPSA Limited shooter needs. The Standard line is true to our mantra "ready to race out of the box", giving you all the features you'll need for competitive shooting from the get go. While it’s called the Standard, it's far from being so; every pistol is hand-built for accuracy and speed with the highest attention to detail and fitted by our master gunsmiths.
Each pistol comes with a full dust cover giving you the best balance between weight, stability and accuracy.
#Specifications
Delicate Gun Cleaner, does not dry out your gun like some not dedicated products like brake-cleaner etc.
Should be used in combination with Xtreme No Rust and the specialy developed for each type of gun Xtreme Ceramic Gun Lube.
Simple to use. Take your pistol apart and just spray on the dirty parts and let it work in to remove the grease and dirt, spray some more to wash it off, let the gun dry, after a short time the dry gun can be sprayed with a mist of Xtreme No Rust, wipe off excess. Now you are ready for the next level, lubing your gun with the Xtreme Ceramic Gun Lube.
500 ml spray
Flammable: Cannot ship by air or outside the EU. Due to air shipping regulations some solvents and CLP liquids cannot be shipped internationally.
Powder measure knob for the Dillon Powder thrower with click for easy adjustment.
Unlike other competitors, this knob is laser etched with 50 graduations giving the user reference points when adjusting. Two steel spring loaded balls generate smooth and repetable clicks. Easy to setup between multiple loads or even calibres, very precise 50 clicks per turn. Testing on pistol powders one click increments is about 0.015 grains. This is a very precise setting.
Simple installment and a tremendous help for if you are using different loads with visual scale.
The Dillon Factory screw requires a wrench when adjusting the amount of powder to dispense in your powder thrower. This knob is labeled with graduations for orientation and easily allows the user to hand adjust the powder dispenser without the need for tools. Works on Dillon 1050, 650,550, SDB and 900 presses.
Both parts are made from aircraft grade aluminum - anodized black color
1 x laser etched knob assembly consisting of one knob frame and one adjusting knob
1 x allen wrench for the grub-screws to fasten
Dillon Powder Bar shown only for reference and is NOT included.
Grips for the CZ Shadow 2 and SP-01 models, long version with checkering in Thick (79 grams) which adds 4 mm in thickness to the gun compared to Thin grips (49 grams).
Colored Aluminium grips for CZ Shadow 2 and SP-01 models in long version with checkering that is extremely grippy.
The checkering is CNC cut in the surface and has straight angles and is circular ( 360° directional grip) , therefore has more grip than any other on the market.
Matching the color is difficult on the picture due to no uniformity in devices so please look for the color on the group picture for closest resemblance of the original color.
Long grips are for guns that do NOT have a Magazine funnel fitted
Short grips are for guns that have a Magazine funnel fitted.
Completely cut from Aluminium on CNC machines.
Color is anodized.
Brass base pads for CZ Tactical Sport Magazines +1
Xtreme No Rust is the solution to protect and lubricate surfaces to prevent from rust. This spray when used in combination with Xtreme Gun Cleaner is the perfect combination and base for lubing with Xtreme Ceramic Gun Lube.
After cleaning the gun with Xtreme Gun Cleaner you spray a fine mist of Xtreme No Rust over the gun. This will set as a protective film over the parts of your gun. With a clean cloth wipe off the axcess.
After this step you are now ready for the next level. Greasing the gun on its critical parts with Xtreme Ceramic Gun Lube.
In 400ml spray.
The new Port Charger Universal Ghost 360 comes with two cups (vertical and horizontal) this allows the shooter to choose the location that best suits its characteristics.
The kit includes two different types of retention for the springs (strong and medium). The white screws regulate the intensity and the movement of the charger when it is inserted.
BARREL LENGHT : 16”
