Select brand

New items

16.31  
Hi quality case lube makes shure your reloading is as smooth as possible and minimizes undue stress on your machine. Spray and mix your cases so they get lubed and than air dry for a day or two to make shure youre cases are completely dry before reloading. Dont worry the lubricant doesnt dry up but rather makes a film on the cases so they have less friction when in contact wirh the dies.
In stock
+

184.43  
L
Always ready for the rain, the Force Rain Shell is a lightweight highly waterproof and breathable jacket built for wet weather. The shell is EN 343 certified and features a 15K/15K waterproof/breathable Tac Dry® membrane with BBP protection. Built with a 2.5L lightweight polyester plain weave and fully seam sealed.
In stock
+

28.69  
These same drop-tubes are used in the Rollsizers (commercial, DC and manual) and the automatic Decappers offered by Rollsizer.com. The tubes are made of steel, and are machined to fit the calibers in use. Height adjust of the tube is required when converting calibers.
In stock
+


127.05  
As no suitable solution was available on the European market, TECTAL developed this magazine catch for left-handed shooters for 2011 pistols. The magazine catch for left-handed shooters is designed as such from the ground up. All parts are executed as robust as possible within the confined space available and are machined from high-quality, alloyed steel respectively stainless steel. Bolts and pin are made from stainless steel.

118.85  
As no suitable solution can be found on the European market TECTAL developed this magazine catch for left-handed shooters for 1911 pistols based on our successful 2011 design offered since 2020. The magazine catch for left-handed shooters was developed as such from the ground up. All parts are designed to be as robust as possible within the confined space available and are machined from high-quality, alloyed steel respectively stainless steel. Bolts and pin are made from stainless steel.
In stock
+

2,880.00  
Each competition pistol is hand built and fitted by our master gunsmiths with the highest attention to detail. Featuring a full length dust cover for the optimal balance between weight and stability, our competition pistols are true to our mantra “ready to race out of the box”. With a crisp light trigger, match grade bull barrel and extended controls giving you the ultimate tool to dominate in the IPSC Standard & USPSA Limited / Limited Optics divisions.
In stock
+

1,200.00  
In stock
+

720.00  
SPECIFICATIONS: Caliber: 9X19 Barrel length: 114mm/4.49 inch. Slide: Hatchet serrations. Steel 3-Dot sights (glock dovetail) Magazine capacity: 17 rounds. Optic ready: Trijicon RMR footprint. Weight without magazine: 610g 3.5 - 4.0 LB trigger pull. Available...
In stock
+

1,200.00  
SPECIFICATIONS:  Caliber: 9X19. Barrel length: 102mm/4.02 inch. Slide: Tomahawk serrations with a weight reduction cut. Steel 3-Dot sights (glock dovetail). Capacity: 15 rounds. Optic ready: Trijicon RMR footprint. Fluted barrel. Weight without magazine:...
In stock
+

720.00  
S PECIFICATIONS:  Caliber: 9X19 Barrel length: 102mm/4.02 inch Slide: Hatchet serrations. Steel 3-Dot sights (glock dovetail) Magazine capacity: 15 rounds . Optic ready: Trijicon RMR footprint. Weight without magazine: 587g 3.5 - 4.0 LB trigger pull. Available...
In stock
+

2,400.00  
Each competition pistol is hand built and fitted by our master gunsmiths with the highest attention to detail. Featuring a full length dust cover for the optimal balance between weight and stability, our competition pistols are true to our mantra “ready to race out of the box”. With a crisp light trigger, match grade bull barrel and extended controls giving you the ultimate tool to dominate in the IPSC Standard & USPSA Limited / Limited Optics divisions.

3,237.71  
The Radical 5.4” is the evolution of our Standard & Limited division line of pistols. Equipped with a one piece sight block barrel, providing the shooter the longest sight radius possible while adding weight up front for a perfect balance and quick sight return. The Radical is all you need to get that extra edge of performance to dominate in the IPSC Standard & USPSA Limited / Limited Optics divisions.
In stock
+

32.75  

RC-tech aluminium optic mounting plates are high quality, precission made products that allow mounting of different optics on your CZ Shadow 2 pistol with optic cut.

In stock
+

1,475.41  
The M4-22 ELITE is a premium .22 caliber semi-automatic tactical rimfire rifle with aluminum upper and lower receivers and all the features of a true M4. The M4-22 is largely mil-spec compatible and will accept most AR15 stocks, handguards and sights. The M4-22 has the look, feel and controls of a true M4 and is a perfect platform for competition and training applications.  

31.07  
In stock
+

98.32  
Quickly reconfigurable between one-point and two-point operation, the Magpul® MS4 QDM Sling enhances the proven MS4 Dual QD Sling GEN2 by including factory-installed Magpul QDM quick-disconnect swivels. As a heavy-duty replacement for the typical push-button swivel, the Magpul QDM offers an innovative low-profile design, single-handed manipulation, a superior corrosion-resistant Melonite® finish, and a high-strength, freely rotating bale that canalizes sling webbing to prevent rollover.

90.12  
The Magpul® MS1 QDM Sling further enhances one of the most versatile line of rifle slings by including factory-installed Magpul QDM quick-disconnect swivels. As a heavy-duty replacement for the typical pushbutton swivel, the Magpul QDM offers an innovative low-profile design, singlehanded manipulation, a superior corrosion-resistant Melonite® finish, and a high-strength, freely rotating bale that canalizes sling webbing to prevent rollover.

21.27  
The Magpul PMAG 10 GL9 - GLOCK 17 was designed for flawless reliability and durability over thousands of rounds. It provides the same quality and performance of the proven Magpul PMAG series of GLOCK magazines while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired.

102.42  

The storage-capable version of the flagship Magpul MOE SL® carbine stock, the MOE SL-S (Storage) Carbine Stock - Mil-Spec is a direct replacement buttstock for AR15/M4 carbines. The sleek profile, dual-side release latches, and waterproof battery tubes make it the slimmest storage tube stock available. The SL-S provides an enhanced cheek weld and true, O-ring sealed, 10m waterproof storage area desired by many, but fits it into the narrowest package possible to allow a more upright head position and minimize bulk.

In stock
+

53.24  

A drop-in replacement buttstock for AR15/M4 Mil-Spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a shorter and slimmer profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25" footman's loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels.

In stock
+

45.04  
The Magpul MOE AKM Hand Guard is a replacement for original stamped receiver AK-47 / AKM / AK-74 pattern rifles with a front sling loop on the hand guard retainer. Featuring an extended gripping portion, integrated heat shield, M-LOK® mounting capability, and replacement gas tube cover, the MOE AKM Hand Guard is an upgrade to any AK pattern rifle.
In stock
+

8.16  

The M-LOK T-Nut Replacement Set is a replacement hardware pack designed for use with all M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses.


27.01  

The Magpul M-LOK Bipod Mount allows for the attachment of most Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market.  By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability.