Select your country
Please select your country
Cart is empty
MBX "Fang" CTR & Hogue Stock Extensions
The 9mm Silent Captured Spring is a drop-in component that softens recoil and reduces cycling noise and vibration in your 9mm carbine. The result is a refined rifle that's a pleasure to shoot. Paired with our 9mm bolt assembly, you have the most reliable 9mm operating system available. The 9mm Enhanced Version provides the same buffering mass as our standard 9mm SCS. At the same time, we've increased overall bolt mass slightly with more room for increased weight if needed. The result is even softer recoil thanks to a further delay in blowback.
GEN 2 AR-15 Silent Captured Spring Builder with Alternative Spring Pack
Standard Version
Includes SCS unit, five alternative weight springs and spacer to allow for installation in both carbine- and rifle-length buffer tubes.
The JPSCS2-15 will not function with older Primary Weapon Systems (PWS) bolt carriers. The design of the carrier will prevent the rifle from cycling.
Recoil Eliminators
Whether you're an practical rifle competitor, a varmint hunter, a member of a special military or police tactical team or just a plinker, sight recovery is the name of the game. Lower the recoil and you reduce muzzle flip, which leads to faster sight recovery and faster follow-up shots. Every compensator operates on this principle, but none can match the classic JP Recoil Eliminator. This design has been with us almost as long as JP has been in business. "Radical performance" was the goal then--it was the 90s, remember--and that still holds today with the Recoil Eliminator still providing the fastest possible sight recovery and the highest level of recoil reduction of any device on the market, including our own line of compensators.
Functional above all else, the brake's broad baffle surfaces redirect the vast majority of muzzle gases out to the sides with each shot. This actually drives the rifle forward during fire, counteracting the rearward recoil impulse for both minimized overall movement and muzzle flip coupled with reduced fatigue from constant fire, particularly with large-bore rifles. The JPRE also shapes these gases so as to spare the shooter from any concussion as well as the annoyance of thrown dust when shooting off a bipod.
A better shooting experience in every way; that's what the Recoil Eliminator delivers. Over two decades of reviews and match wins tell the tale.
Product Details
Created as an evolution of the original MOE 1911 Grip Panels, the 1911 Grip Panels with TSP texture offers the user a more aggressive texture allowing for better control of the weapon in all environments.Constructed of heavy-duty reinforced polymer, the grips have a unique diamond-shaped cross section to prevent twisting in the hand, an aggressive magazine release cut-out, aggressive TSP texture (Trapezoidal Surface Projections) for positive control, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.
Made in U.S.A.
Features
A cool, new, practical way to carry your Grip-Enhancer into action!
Many shooters like to carry their Grip Enhancer of choice on their belts, so they can apply it just before the “Load and make ready” command. And what is needed is a quick and secure carrying solution, which allows you fast access to the Grip Enhancer and a quick return to belt retention. The New DAA Magnetic Grip-Enhancer does just that – and in style!
Two super-strong magnets are fitted into the custom-made silicone belt and bottle attachments, clicking together and locking securely in place. Run, jump or spin – you wont accidentaly dislodge this holder. Yet a moderate tug/rotation motion and it will come away in your hand for quick application.
The DAA Magnetic Grip-Enhancer Holder is a perfect fit for a bottle of Progrip or for the new DAA GRIPZ lotion. (Any bottle of approx. 34-36mm in diameter could be held securely.)
Available in Black, Blue or Red colors.
MOA - Dot Module, For Polymer Sight
Mag Springs designed to fit a "Grams Format" follower. They are a replacement spring for any of the Grams "Follower Kits".
All of the functional requirements are met while keeping the weight under 6 ounces. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and accepts a new optimized sling configuration. The lightest stock of its kind in the market.
? Slide-on replacement for collapsible butt stock? Angled non-slip rubberized buttpad allows faster presentation, even with body armor? Multiple Sling Slots with single point mounting? Quick Detach Sling mounting point is positioned for optimum usage including ambidextrous shooters? Upper section provides enhanced cheek weld? MilSpec Buffer Tube Spec
Mil Spec size 1.148 diameter receiver extensions (buffer tube)
Weight: 5.8oz
Height: 5.22"
Width: 1.752"
Length: 7.084"
Commercial spec size 1.17 diameter receiver extenstions (buffer tubes)
This easy to install, inexpensive, drop in upgrade is perfect for any AR rifle. CNC machined from a solid piece of 6061-T6 aluminum, the Billet Mag Release Button is larger and easier to manipulate than the Mil-Spec version. A diamond texture face and a blind threaded hole keep the lines clean and give it unique styling.
Perfect fitting and durable hybrid holsters made by Ghost International for most guns used in IDPA and IPSC. Available in left and right hand, adjustable to fit snugly.
CED has taken the BEST Range Bag on the market today to an entirely new level of design and function! The result is the new CED Deluxe Professional Range Bag!
Fits Beretta 682, Some 687 models, Silver Hawk, DT10, Some 391 models
These Optima Choke tubes are available in internal and external versions for 12 gauge shotguns. They are longer and slimmer than conventional Mobilchoke tubes. Thanks to the elongated cone they minimize pellet deformation and improve shot patterns. The various versions are fully interchangeable on 12 gauge guns with Optima Bore barrels. These choke tubes are for 12 gauge shotguns with the Optima-Choke system only.
Does not fit Benelli.
Producing the perfect IPSC shooting pants has been a goal of ours at DAA for a long while. We have tried before several times, with varying degrees of success.However now, with the new DAA SHOTAC Pants, we believe we have “hit the nail on the head!”.Our SHOTAC Pant is made of lightweight, tough and durable rip-stop fabric, which provides ample flex and an extremely comfortable fit. The design and material choice allow you a comfortable range of motion, without appearing loose fitting or baggy. These pants do not look or feel like gym/sweat pants – but they provide as much flexibility and comfort as any sportswear!The SHOTAC Pant features include:- A self-adjusting tunnel waistband, with a full 2” range of fit- An extra frontal pocket for that “load and make ready” magazine (or for your cell phone)- Two large rear Velcro pockets- Large, quick access angled side pockets- Wide belt loops & double layered fabric in the belt area for increased comfort while wearing your shooting rig- Double layered knee area, for increased durability- Steel front snap with DAA logo. SHOTAC logo embroidered on back pocket flap- Fade and stain resistant fabric, available in Black or Navy Blue.Size Chart:Small: Waist: 30"-32" Length 32"Medium: Waist: 32"-34" Length 33"Large: Waist: 34"-36" Length 34"X-Large: Waist: 36"-38" Length 34"XX-Large: Waist: 38"-40" Length 34"XXX-Large: Waist: 40"-42" Length 34"
Dillon handgun case gages allow you to check your handgun ammunition to ensure it will fit a minimum sized chamber. Made of stainless steel for long life.
In 2011 we introduce the all aluminum Race Master Magazine Pouches, the first of their kind. Their innovative design is so different from other model pouches, that all who used them were instantly fans.However, their one shortcoming is their relative high price tag... A $60 pouch is not affordable by all, especially when you consider that you need 3 or 4 of them on your belt. So we set out to develop and produce a plastic molded version of this same winning design, and we are proud to introduce the all new DAA Racer Magazine Pouch, the perfect mate for the DAA Racer Holster!The DAA Racer pouches borrow heavily from the Race Master Pouch. In fact, we took the very same body design, modified it to suite plastic mounding requirements, while maintaining the exact same unique “pressure from the back” adjustable holding system that has proven so successful. Interchangeable inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&p mags. A single stack spacer is available as an accessory as well.The pouch is completely ambidextrous, allowing easy mounting for left hand or right had users. And you can even mount the pouch at 90deg away from the body, just as you can in the RM version.
Warren Tactical Series sight design is void of sharp corners, serrations, undercuts, and odd angles because they are distracting!
The patented, curved rear profile, called the "Waive Design" and the radius corners of the rear notch combine to quickly direct the shooter's vision upward toward the front sight and the target / threat.
The Waive Design also allows faster "target to target" transitions. Plus, with the long outer corners of the rear sight removed, the shooter can see more of the target / threat area clearly. Front sight height: 5.5mm (0.215”) Front sight width: 3.2mm (0.125”)
Bul 1911 modular trigger.
Trigger shoe B is included in the package.
NOTE
Other trigger shoes sold separately: https://cesar-shop.com/firearm...
