Magpul
 
Color
Precio
Talla
Categoría
64.75  

Product Details

The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc.

Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability and included Pin keeps upper in proper position.

The BEV can also be turned over and used as a mag well vise block to support the lower receiver during maintenance, etc.

Made in U.S.A.

 

Features

  • Provides support for all AR15/M4 upper and lower receivers
  • Solidly engages barrel extension with steel lugs
  • Full-length steel support shank
  • Body made from the same high-quality polymer as other Magpul products

 

Specs

Specifications

BEV™ Block – AR15/M4

  • Weight: 11.2 oz.



17.21  

Product Details

The PMAG Minus 10 Round Limiter installs in 20 or 30 round GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.

NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.

Made in U.S.A.

En stock
+

100.00  

Product Details

American-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric and SAE bottle caps.)

Made in U.S.A.

 

Features

  • American-made with US steel
  • Heat-treated steel construction with manganese phosphate finish
  • USGI barrel nut wrench
  • Free-float tube barrel nut wrench
  • 1/2" torque wrench/breaker bar interface
  • Armorer's hammer
  • Rifle-length/Entry-length receiver extension wrench
  • USGI castle nut wrench*, usable with aftermarket end plates such as the ASAP® and ASAP®-QD
  • 3/4" wrench for most flash hiders/muzzle brakes
  • USGI torque spec references
  • Bottle opener

Specs

 

Specifications

Armorer's Wrench – AR15/M4

  • Weight: 1.1 lb.
  • Length, maximum: 11.7 in.
  • Handle Thickness: 0.35 in.

 

NOTE: Not compatible with larger pistol-style receiver extension tubes



20.45  

The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing.


Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.

Made in U.S.A.

Features

  • Fits Full Size Frame 1911s and copies with standard grip screw bushings
  • Reinforced polymer construction
  • Unique diamond-shaped cross-section to prevent twisting in the hand
  • Aggressive magazine release cut-out
  • Compatible with ambidextrous safeties
  • Positive, anti-slip texture


En stock
+

28.65  

Product Details

The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble free magazine changes.

 With easy bolt-on installation with no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight.

 



36.84  

Product Details

Designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch, the B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger.

Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms. All mounting hardware included.

 Made in U.S.A.


21.27  

Product Details

The Enhanced Trigger Guard is a black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The Enhanced Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. All mounting hardware included.

 Made in U.S.A.



114.75  

Product Details

The MBUS Pro (Magpul® Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size.

The dual aperture, windage adjustable Rear and no-tool, elevation adjustable Front excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks. Positive detents keep the MBUS Pro Front and Rear at standard AR sight height when deployed, and so low when they are stowed that you'll never notice them until they're needed. Narrow width Front is compatible with most IR aiming laser and light installations for the professional user.

 Made in U.S.A.

En stock
+

57.34  

Product Details

The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16 platform.

 Made in U.S.A.

En stock
+


45.04  

Product Details

The Magpul MOE AK Hand Guard is a replacement for standard AK pattern rifles without a front sling loop on the hand guard retainer. Featuring an extended gripping portion, integrated heat shield, M-LOK® mounting capability, and replacement gas tube cover, the MOE AK Hand Guard is an upgrade to any AK pattern rifle.

 Made in U.S.A. Hand Guard counts as one US compliance part for 922(r).


En stock
+

29.47  

Product Details

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. 

 Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

 Made in U.S.A.


1 - 8
3 4 5 6 7 8 9 10