Select your country
Please select your country
Cart is empty
No items found matching the search criteria
The Heat-Treated Castle Nut screws onto the AR15/M4 lower receiver extension (buffer tube) and keeps the receiver extension and lower receiver end plate secured in place. The large notches allow for positive engagement with a castle nut wrench for proper installation and torque. The smaller notches provide a location for the end user to stake the castle nut to prevent accidental loosening.
Finished in a Mil-spec manganese phosphate.
The Zhukov-U Hand Guard shaves off 1.5” from the original Zhukov AK Hand Guard to accommodate shorter barreled rifles and pistols, and keeps the front end of full length rifles a little more lively. The shorter version also allows us to accommodate the military issue cleaning rods.
The Zhukov-U shares the same style of sturdy aluminum chassis as the longer standard Zhukov, providing strength and heat mitigation in a comfortable, injection molded exterior for superior ergonomics.
The Zhukov-U includes M-LOK slots for accessory attachment, and is fully compatible with the UltiMAK gas tube rail. Installation requires removing handguard retainer.
The Magpul Enhanced Receiver Extension is a 10-position, Mil-Spec sized, SR25 / M110 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.
Due to its longer length, this receiver extension is compatible with most DPMS® Gen 1 pattern 7.62x51 firearms with standard length AR15 / M4 carbine buffer components as well as aftermarket A5 buffers and springs for use on 5.56x45 AR15 / M4 platforms.*
Constructed of impact extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options.
The Magpul Enhanced Receiver Extension is a 7-position, Mil-Spec sized, AR15 / M4 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.
Constructed of impact-extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options while retaining a standard length for the tube.
The Magpul PMAG Ranger Plate AK/AKM is a floor plate replacement for all Kalashnikov PMAG magazines. It incorporates an integral loop similar to the original Magpul USGI Ranger. The reinforced polymer base has an overmolded rubber loop that provides positive control and impact protection.
When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes. The PMAG AK/AKM Ranger replaces standard Kalashnikov PMAG floor plates.
The storage-capable version of the flagship Magpul MOE SL® carbine stock, the MOE SL-S (Storage) Carbine Stock - Mil-Spec is a direct replacement buttstock for AR15/M4 carbines. The sleek profile, dual-side release latches, and waterproof battery tubes make it the slimmest storage tube stock available. The SL-S provides an enhanced cheek weld and true, O-ring sealed, 10m waterproof storage area desired by many, but fits it into the narrowest package possible to allow a more upright head position and minimize bulk.
A drop-in replacement buttstock for AR15/M4 Mil-Spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a shorter and slimmer profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25" footman's loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels.
The M-LOK T-Nut Replacement Set is a replacement hardware pack designed for use with all M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses.
The Magpul M-LOK Bipod Mount allows for the attachment of most Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability.
Product Details
The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers, and a shock-absorbing rubber butt-pad for superior traction.
The Zhukov-S has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded polymer Zhukov-S Stock redefines the human interface with the AK platform.
The Magpul QDM is a heavy-duty upgrade to standard push-button quick detach sling swivels. The innovative design fits all standard sized QD cups and allows for a lower profile sling swivel that offers one-handed manipulation, a high strength bale that rotates freely, canalizes sling webbing to prevent rollover, and superior resistance to corrosion with a Melonite finish. Dual side release tabs prevent accidental release. Quick-disconnect sling swivel for 1-1/4" webbing. Combine with MS1® Sling for dedicated two-point sling, or with MS1® MS4® Adapter for two to one-point convertible sling.
The MOE SL Stock– Commercial-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using Commercial-Spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions.
The next evolution in our MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system. Significantly reduced in size from the MBUS, it sits at just 0.55” high when folded, 1.38” at its widest point, and weighs a scant 30 grams with hardware.
The next evolution in our MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system. Significantly reduced in size from the MBUS, it sits at just 0.47” high when folded, 1.38” at its widest point, and weighs a scant 25 grams with hardware.
The PMAG® 10 5.56 AC is a polymer 5.56x45 NATO (.223 Remington) magazine designed for short action Accuracy International Chassis Systems (AICS) pattern bottom metal, including the Bolt Action Magazine Well for the Magpul Hunter family of stocks. Designed with many of the same qualities that make our PMAGS the most reliable and durable in the world, the PMAG 10 5.56 AC features GEN M3 technology, including a self-lubricating follower, a stainless-steel spring, and constant-curve internal geometry for smooth feeding.
The Magpul SL Hand Guard for the HK94/MP5 is a high-strength, injection-molded polymer handguard solution that provides the user with improved ergonomics and anti-slip texturing. It also includes M-LOK® compatible slots that allow mounting of modern accessories. Designed for the HK94/MP5 and their clones, it provides increased utility and enhanced control of the firearm.
The MOE AK+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.
Lightweight but incredibly strong, our PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for HK94/MP5 large-format pistols and pistol caliber carbines. Providing 50-round capacity, the unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage.
Lightweight but incredibly strong, our PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for CZ Scorpion EVO pistol caliber carbines. Providing 50-round capacity, the unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage. For easy loading, it includes a ratcheting loading lever that removes tension from the internal spring
M-LOK mount for clip-on slings. Mounts to M-LOK compatible hand guards and forends. Accepts clip-style attachments such as our own Paraclip.
The MS4 Dual QD GEN2 incorporates a new, low profile quick-adjust slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armour configurations.
Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting.
The MS1® Sling is the most versatile addition to the Magpul® line of rifle slings. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once it's set, with no tails, loops, or other potential snag hazards.
The RSA QD provides a forward attachment point for the Magpul MS4® Sling and other push-button QD slings. Made from corrosion resistant steel, mounts on 1913 Picatinny rail, and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access.
The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations.
M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). This pack of six M-LOK covers is non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL and SGA forends, and may not be compatible with free-float hand guards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock in.
The MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. As a standalone product, the rapidly-convertible MS3 allows an operator to leverage the maneuverability of one-point attachment for direct action, or two-point attachment for stability. Single-hand adjustments and quick-release, positive-locking hardware provide flexibility and durability in a truly adaptable sling system.
Combine with the MS1 Sling and QD Sling Swivel to provide two to one-point convertibility. Constructed of Melonite™ and manganese phosphate finished steel and polymer hardware combined with custom, snag-free, high durability 1-1/4" webbing.
Magpul M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings.
The Magpul Bipod M-LOK offers serious strength and versatility at a price that provides unmatched value. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. It's extremely light weight, at just over 11 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.
The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.
Made in U.S.A.
The MIAD (Mission Adaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15 / AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs.
Magpul Pmag is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR MK 16/16S, and others. Durable polymer construction, redesigned slef lubricating follower, easy to disassemble flared floorplate are just some of many features that Pmag offers.
The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles featuring true 20-round capacity, constant-curve body, anti-tilt follower, and snap on Impact/Dust Cover. Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.
The PMAG 30 AK/AKM GEN M3 is a durable, lightweight, high reliability 30-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R, and others.)
It features steel-reinforced locking lugs, removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the performance and military-grade durability you expect from a PMAG.
The MOE Stock – Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.
The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.
With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. With a similar shape to a 'medium' sized MIAD, this AR15 / M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap.
Designed for use with all M-LOK compatible hand guards and forends, our 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.
The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection-molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15 / M16 platform. An elevation adjustment tool is included, but most aftermarket A2 front sight adjustment tools may be used as well.
Created as an evolution of the original MOE 1911 Grip Panels, the 1911 Grip Panels with TSP texture offers the user a more aggressive texture allowing for better control of the weapon in all environments.Constructed of heavy-duty reinforced polymer, the grips have a unique diamond-shaped cross section to prevent twisting in the hand, an aggressive magazine release cut-out, aggressive TSP texture (Trapezoidal Surface Projections) for positive control, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.
Features
The Magpul PMAG Ranger Plate is a floorplate replacement for all 7.62x51 PMAG LR/SR GEN M3 magazines that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.
Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included.
Similar in concept to the Magpul Ranger Plate™ for AR15/M16 magazines, the SpeedPlate allows for rapid magazine extraction and positive handling. Protects the base of magazine from impact.
The SpeedPlate replaces the floorplate on all factory Fully Metal Lined (FML) GLOCK 9mm and .40S&W double-stack pistol magazines.*
*NOTE: SpeedPlate is NOT compatible with the Magpul® GL9 series of PMAGs®.
The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc.Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability and included Pin keeps upper in proper position.The BEV can also be turned over and used as a mag well vise block to support the lower receiver during maintenance, etc.Made in U.S.A.
Specifications
BEV™ Block – AR15/M4
The PMAG Minus 10 Round Limiter installs in 20 or 30 round GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.
NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.
American-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric and SAE bottle caps.)Made in U.S.A.
Armorer's Wrench – AR15/M4
NOTE: Not compatible with larger pistol-style receiver extension tubes