Magpul
 
Color
Price
Size
Category
180.29  

The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56x45 NATO/.223 Remington* polymer drum magazine for AR15/M4 compatible weapons.

 With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload.

In stock
+

69.67  

The MS1 allows easy shoulder transitions, rapid adjustability for hands-free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings.

45.04  
The Magpul MOE AK Hand Guard is a replacement for standard AK pattern rifles without a front sling loop on the hand guard retainer. Featuring an extended gripping portion, integrated heat shield, M-LOK® mounting capability, and replacement gas tube cover, the MOE AK Hand Guard is an upgrade to any AK pattern rifle.
In stock
+

20.45  
17 Rounds

The PMAG GL9 is a Glock 9mm handgun magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Our Glock magazines come with many of our other platform PMAG features, including a high visibility controlled-tilt follower, a stainless steel spring, a floorplate that's easily removable for cleaning, a paint pen dot matrix for magazine marking, ridged floorplate edges for better grip, and capacity indicator windows.

In stock

73.73  

The Magpul CTR (Compact/Type Restricted) model is a drop-in replacement buttstock for AR15 / M16 carbines, and comes in Mil-Spec and Commercial-Spec variants. Designed for light, fast action, the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

In stock
+

29.47  

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction, we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.


344.26  
Made from reinforced polymer and an anodized aluminum bedding block, the Hunter offers users a cost effective upgrade featuring fully adjustable length of pull, comb height, and enhanced ergonomics. 
In stock
+

36.84  

Product Details

Designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch, the B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger.

Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms. All mounting hardware included.

 Made in U.S.A.


245.86  

The UBR GEN2 is an adjustable stock for AR15/M4 and AR10/SR25 platforms, designed to offer similar strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position. An update of the revolutionary Utility/Battle Rifle (UBR) stock, the UBR GEN2 features a fixed cheek piece to provide a consistent cheek weld in any of its eight positions, and is compatible with Carbine as well as A5 and SR-25 length buffer systems.

In stock
+

286.84  

The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment. With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles.

In stock
+


22.09  

Similar to the MOE SL, the MOE-K2 AK Grip is a drop-in upgrade for AK47/AK74 platforms that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle improves comfort and control on these shorter LOP rifles that bring the primary hand in closer to the shooter's body.

With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AK platform.

In stock
+

31.93  
The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel.
In stock
+

39.30  

The AFG-2 (Angled Fore Grip) is a slim line design that is shorter in overall length and width compared to the original AFG. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

In stock
+

15.57  

Product Details

Similar in concept to the Magpul Ranger Plate™ for AR15/M16 magazines, the SpeedPlate allows for rapid magazine extraction and positive handling. Protects the base of magazine from impact.

The SpeedPlate replaces the floorplate on all factory Fully Metal Lined (FML) GLOCK 9mm and .40S&W double-stack pistol magazines.*

*NOTE: SpeedPlate is NOT compatible with the Magpul® GL9 series of PMAGs®.

Made in U.S.A.



28.65  

Magpul M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. 

In stock
+

20.45  

The Magpul® Enhanced Rubber Butt-Pad, 0.70" is an optional replacement butt pad for the CTR® and MOE® Carbine Mil-Spec stocks as well as the original UBR®, all STR®, ACS-L™ and ACS™ stocks.


20.45  
10 Round

Product Details

The PMAG 30 AK/AKM GEN M3 is a durable, lightweight, high reliability 30-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R, and others.)

 It features steel-reinforced locking lugs, removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the performance and military-grade durability you expect from a PMAG.

In stock
+

24.55  

Product Details

The Magpul PMAG Ranger Plate is a floorplate replacement for all 7.62x51 PMAG LR/SR GEN M3 magazines that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.

Made in U.S.A.

In stock
+

53.24  

Product Details

The MOE Stock – Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

 

The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

 

Made in U.S.A.

 

In stock
+

17.21  

Product Details

The PMAG Minus 10 Round Limiter installs in 20 or 30 round GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.

NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.

Made in U.S.A.

In stock
+

22.91  

Product Details

Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included.

Made in U.S.A.

Features

  • Replacement for AR15/M4 pistol-grip*
  • One-piece reinforced polymer construction
  • More vertical grip angle than standard A2 grips
  • Minimalist design provides for a compact and thin profile
  • Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
In stock
+

22.09  
The MagLink is a coupler for PMAG 30 and 40 round AR/M4 magazines* which allows the user to attach two magazines together for more efficient speed reloads, and to keep additional ammunition accessible on the weapon at all times. The MagLink features a two-piece bolt-on design and durable, lightweight reinforced polymer construction.

100.00  

Product Details

American-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric and SAE bottle caps.)

Made in U.S.A.

 

Features

  • American-made with US steel
  • Heat-treated steel construction with manganese phosphate finish
  • USGI barrel nut wrench
  • Free-float tube barrel nut wrench
  • 1/2" torque wrench/breaker bar interface
  • Armorer's hammer
  • Rifle-length/Entry-length receiver extension wrench
  • USGI castle nut wrench*, usable with aftermarket end plates such as the ASAP® and ASAP®-QD
  • 3/4" wrench for most flash hiders/muzzle brakes
  • USGI torque spec references
  • Bottle opener

Specs

 

Specifications

Armorer's Wrench – AR15/M4

  • Weight: 1.1 lb.
  • Length, maximum: 11.7 in.
  • Handle Thickness: 0.35 in.

 

NOTE: Not compatible with larger pistol-style receiver extension tubes



81.93  

Kopito za puške MOE (Magpul Original Equipment) je nadomestek za puške AR15/M16 A1 in A2, ki uporablja Rifle lenght dolžino buffer tube. Zasnovano kot osnovna nadgradnja ima vgrajeno 1,25-palčno zanko za nosilni jermen, dvostranske sprednje in zadnje pritrdilne točke QD, zamenljivo protizdrsno gumirano podlogo in notranji predal za shranjevanje, dostopen skozi zadnjo stran kopita.

In stock
+

13.12  
Internal core unit for the MIAD as well as the MOE® and MOE-K2® Grips*. Designed to hold one (1) standard AR15 / M4 complete bolt and firing pin.
In stock
+

28.65  

The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble-free magazine changes. With easy bolt-on installation and no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight.


139.30  

The Magpul Bipod M-LOK offers serious strength and versatility at a price that provides unmatched value. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. It's extremely light weight, at just over 11 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.

In stock
+

45.04  

The MOE Fixed Carbine Stock - Mil-Spec model (Magpul Original Equipment) provides an inexpensive, fixed, non-collapsing stock option for Mil-Spec size carbine-length buffer tubes. The MOE Fixed Carbine Stock has a slim profile, improved cheek weld, and multiple sling attachment options, and is compatible with ASAP® Plates and PRS® Extended Rubber Butt-Pad.

In stock
+

57.34  
The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15 / M16 platform.
In stock
+

114.75  

The MBUS Pro (Magpul® Back-Up Sight) is a corrosion-resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size. The dual aperture, windage adjustable Rear and no-tool, elevation adjustable Front Sights excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks.

In stock
+

64.75  

Product Details

The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc.

Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability and included Pin keeps upper in proper position.

The BEV can also be turned over and used as a mag well vise block to support the lower receiver during maintenance, etc.

Made in U.S.A.

 

Features

  • Provides support for all AR15/M4 upper and lower receivers
  • Solidly engages barrel extension with steel lugs
  • Full-length steel support shank
  • Body made from the same high-quality polymer as other Magpul products

 

Specs

Specifications

BEV™ Block – AR15/M4

  • Weight: 11.2 oz.



21.27  

The Enhanced Trigger Guard is a non-folding black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations.


36.84  
The PMAG 30 AK/AKM GEN M3 is a durable, lightweight, high-reliability 30-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R, and others.) It features steel-reinforced locking lugs, a removable floorplate, constant curve geometry, and a...
In stock
+

24.55  

Product Details

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments. 

 With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

 Made in U.S.A.


In stock
+

20.45  

The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing.


Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.

Made in U.S.A.

Features

  • Fits Full Size Frame 1911s and copies with standard grip screw bushings
  • Reinforced polymer construction
  • Unique diamond-shaped cross-section to prevent twisting in the hand
  • Aggressive magazine release cut-out
  • Compatible with ambidextrous safeties
  • Positive, anti-slip texture


In stock
+

19.63  

Magpul Pmag is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR MK 16/16S, and others. Durable polymer construction, redesigned slef lubricating follower, easy to disassemble flared floorplate are just some of many features that Pmag offers.

In stock

40.94  

The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection-molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15 / M16 platform. An elevation adjustment tool is included, but most aftermarket A2 front sight adjustment tools may be used as well.

In stock
+

122.91  

Product Details

The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers, and a shock-absorbing rubber butt-pad for superior traction. 

 The Zhukov-S has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded polymer Zhukov-S Stock redefines the human interface with the AK platform.



9.84  
Designed for use with MOE hand guards and forends, the 7-slot MOE Polymer Rail sections allow the attachment of various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc.

27.83  
Designed for use with all M-LOK compatible Hand Guards and Forends, our M-LOK® Aluminum Rail Sections (7 Slots) allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.
In stock
+

163.89  

Lightweight but incredibly strong, our PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for CZ Scorpion EVO pistol caliber carbines. Providing 50-round capacity, the unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage. For easy loading, it includes a ratcheting loading lever that removes tension from the internal spring

In stock
+

40.94  

The MS1® Sling is the most versatile addition to the Magpul® line of rifle slings. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once it's set, with no tails, loops, or other potential snag hazards.

In stock
+

65.53  

The MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. As a standalone product, the rapidly-convertible MS3 allows an operator to leverage the maneuverability of one-point attachment for direct action, or two-point attachment for stability. Single-hand adjustments and quick-release, positive-locking hardware provide flexibility and durability in a truly adaptable sling system. 


22.09  
Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for the AR15 / M4 that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body.

29.47  
20 Round

The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles featuring true 20-round capacity, constant-curve body, anti-tilt follower, and snap on Impact/Dust Cover. Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.

 


28.65  

Combine with the MS1 Sling and QD Sling Swivel to provide two to one-point convertibility. Constructed of Melonite™ and manganese phosphate finished steel and polymer hardware combined with custom, snag-free, high durability 1-1/4" webbing.

In stock
+

27.01  

The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. With a similar shape to a 'medium' sized MIAD, this AR15 / M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap.

In stock
+
1 2 3