The AFG-2 (Angled Fore Grip) is a slim line design that is shorter in overall length and width compared to the original AFG. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

The Heat-Treated Castle Nut screws onto the AR15/M4 lower receiver extension (buffer tube) and keeps the receiver extension and lower receiver end plate secured in place.  The large notches allow for positive engagement with a castle nut wrench for proper installation and torque.  The smaller notches provide a location for the end user to stake the castle nut to prevent accidental loosening.

Finished in a Mil-spec manganese phosphate.

Product Details

American-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric and SAE bottle caps.)

Made in U.S.A.

Features

• American-made with US steel
• Heat-treated steel construction with manganese phosphate finish
• USGI barrel nut wrench
• Free-float tube barrel nut wrench
• 1/2" torque wrench/breaker bar interface
• Armorer's hammer
• Rifle-length/Entry-length receiver extension wrench
• USGI castle nut wrench*, usable with aftermarket end plates such as the ASAP® and ASAP®-QD
• 3/4" wrench for most flash hiders/muzzle brakes
• USGI torque spec references
• Bottle opener

Specs

Specifications

Armorer's Wrench – AR15/M4

• Weight: 1.1 lb.
• Length, maximum: 11.7 in.
• Handle Thickness: 0.35 in.

NOTE: Not compatible with larger pistol-style receiver extension tubes

Product Details

Designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch, the B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger.

Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms. All mounting hardware included.

 Made in U.S.A.

Product Details

The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc.

Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability and included Pin keeps upper in proper position.

The BEV can also be turned over and used as a mag well vise block to support the lower receiver during maintenance, etc.

Made in U.S.A.

Features

• Provides support for all AR15/M4 upper and lower receivers
• Solidly engages barrel extension with steel lugs
• Full-length steel support shank
• Body made from the same high-quality polymer as other Magpul products

Specs

Specifications

BEV™ Block – AR15/M4

• Weight: 11.2 oz.

The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations.

The Magpul Bipod M-LOK offers serious strength and versatility at a price that provides unmatched value. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. It's extremely light weight, at just over 11 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.

The Magpul CTR (Compact/Type Restricted) model is a drop-in replacement buttstock for AR15 / M16 carbines, and comes in Mil-Spec and Commercial-Spec variants. Designed for light, fast action, the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble-free magazine changes. With easy bolt-on installation and no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight.

The Magpul Enhanced Receiver Extension is a 7-position, Mil-Spec sized, AR15 / M4 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.

Constructed of impact-extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options while retaining a standard length for the tube.

The Magpul Enhanced Receiver Extension is a 10-position, Mil-Spec sized, SR25 / M110 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.

Due to its longer length, this receiver extension is compatible with most DPMS® Gen 1 pattern 7.62x51 firearms with standard length AR15 / M4 carbine buffer components as well as aftermarket A5 buffers and springs for use on 5.56x45 AR15 / M4 platforms.*

Constructed of impact extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options.

The Magpul® Enhanced Rubber Butt-Pad, 0.70" is an optional replacement butt pad for the CTR® and MOE® Carbine Mil-Spec stocks as well as the original UBR®, all STR®, ACS-L™ and ACS™ stocks.

The Enhanced Trigger Guard is a non-folding black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations.