Select your country
Please select your country
Cart is empty
No items found matching the search criteria
The AFG-2 (Angled Fore Grip) is a slim line design that is shorter in overall length and width compared to the original AFG. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.
The Heat-Treated Castle Nut screws onto the AR15/M4 lower receiver extension (buffer tube) and keeps the receiver extension and lower receiver end plate secured in place. The large notches allow for positive engagement with a castle nut wrench for proper installation and torque. The smaller notches provide a location for the end user to stake the castle nut to prevent accidental loosening.
Finished in a Mil-spec manganese phosphate.
Product Details
American-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric and SAE bottle caps.)Made in U.S.A.
Features
Specifications
Armorer's Wrench – AR15/M4
NOTE: Not compatible with larger pistol-style receiver extension tubes
Designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch, the B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger.Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms. All mounting hardware included.
Made in U.S.A.
The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc.Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability and included Pin keeps upper in proper position.The BEV can also be turned over and used as a mag well vise block to support the lower receiver during maintenance, etc.Made in U.S.A.
BEV™ Block – AR15/M4
The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations.
The Magpul Bipod M-LOK offers serious strength and versatility at a price that provides unmatched value. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. It's extremely light weight, at just over 11 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.
The Magpul CTR (Compact/Type Restricted) model is a drop-in replacement buttstock for AR15 / M16 carbines, and comes in Mil-Spec and Commercial-Spec variants. Designed for light, fast action, the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.
The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble-free magazine changes. With easy bolt-on installation and no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight.
The Magpul Enhanced Receiver Extension is a 7-position, Mil-Spec sized, AR15 / M4 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.
Constructed of impact-extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options while retaining a standard length for the tube.
The Magpul Enhanced Receiver Extension is a 10-position, Mil-Spec sized, SR25 / M110 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.
Due to its longer length, this receiver extension is compatible with most DPMS® Gen 1 pattern 7.62x51 firearms with standard length AR15 / M4 carbine buffer components as well as aftermarket A5 buffers and springs for use on 5.56x45 AR15 / M4 platforms.*
Constructed of impact extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options.
The Magpul® Enhanced Rubber Butt-Pad, 0.70" is an optional replacement butt pad for the CTR® and MOE® Carbine Mil-Spec stocks as well as the original UBR®, all STR®, ACS-L™ and ACS™ stocks.
The Enhanced Trigger Guard is a non-folding black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations.
The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction, we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.
The Magpul M-LOK Bipod Mount allows for the attachment of most Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability.
M-LOK mount for clip-on slings. Mounts to M-LOK compatible hand guards and forends. Accepts clip-style attachments such as our own Paraclip.
Designed for use with all M-LOK compatible hand guards and forends, our 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.
Magpul M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings.
The M-LOK T-Nut Replacement Set is a replacement hardware pack designed for use with all M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses.
The next evolution in our MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system. Significantly reduced in size from the MBUS, it sits at just 0.47” high when folded, 1.38” at its widest point, and weighs a scant 25 grams with hardware.
The next evolution in our MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system. Significantly reduced in size from the MBUS, it sits at just 0.55” high when folded, 1.38” at its widest point, and weighs a scant 30 grams with hardware.
The MBUS Pro (Magpul® Back-Up Sight) is a corrosion-resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size. The dual aperture, windage adjustable Rear and no-tool, elevation adjustable Front Sights excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks.
The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection-molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15 / M16 platform. An elevation adjustment tool is included, but most aftermarket A2 front sight adjustment tools may be used as well.
The MIAD (Mission Adaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15 / AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs.
The PMAG Minus 10 Round Limiter installs in 20 or 30 round GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.
NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.
The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.
With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
Created as an evolution of the original MOE 1911 Grip Panels, the 1911 Grip Panels with TSP texture offers the user a more aggressive texture allowing for better control of the weapon in all environments.Constructed of heavy-duty reinforced polymer, the grips have a unique diamond-shaped cross section to prevent twisting in the hand, an aggressive magazine release cut-out, aggressive TSP texture (Trapezoidal Surface Projections) for positive control, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.
The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing.
Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.