Select your country
Please select your country
Cart is empty
No items found matching the search criteria
The next evolution in our MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system. Significantly reduced in size from the MBUS, it sits at just 0.55” high when folded, 1.38” at its widest point, and weighs a scant 30 grams with hardware.
The next evolution in our MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system. Significantly reduced in size from the MBUS, it sits at just 0.47” high when folded, 1.38” at its widest point, and weighs a scant 25 grams with hardware.
BUL front sight with optic fibre for 1911 / 2011 models with Novak front sight cut.
The set of Eemann Tech Competitions sights for GLOCK has been designed specifically for IPSC competitions. Front sight has a fiber rod with diameter: 1 mm or 1.5 mm.
Dawson Precision Glock Standard Front Sight .235T/.105W
Made for double stack Glocks this sight is compatible with optic cut slides in order to prevent removing iron sights with optic use.
This new cover plate sight will allow users of the UL & Viper pistols with the Shield RMSc optic cut to remove the optic and have an adjustable iron sights setup.
Combat adjusatable rear sight for 1911 / 2011.
Trijicon Bright & Tough Night Sights are three-dot iron sights that increase night-fire shooting accuracy by as much as five times over conventional sights. Equally impressive, they do so with the same speed as instinctive shooting and without the need for batteries. Housed in a metal body and cushioned within silicone rubber, Bright & Tough Night Sights feature a unique shock-resistant design.
The GL05 is not a night sight set, but a steel replacement set for the original plastic sights on Glock pistols. The GL05 features three white dots.
The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation.
Behind Trijicon Fiber Sights is years of engineering and manufacturing experience in producing the industry’s leading night sight and fiber illuminated scopes and sights. Featuring similar fiber optic materials used in several Trijicon fiber optic scopes and sights, including the battle-proven ACOG, the Trijicon Fiber Sights are purposely engineered to bring the absolute brightest aiming point while retaining strength and maintaining a refined sight picture.
Komplet merkov z optičnim vlaknom Zev Technologies © so poceni dodatek, ki ga lastnik Glock-a lahko doda na svoje strelno orožje. Tri najpogostejše pritožbe lastnikov Glock-a so sprožilec, oprijem in merki.
CZ Adjustable Rear Sight for CZ 75, CZ 75 B Ω, CZ 85
Support base with rail for sight, characterised by an adjustment wheel and two low tolerance sliding shafts that allow accurate calibration.
To meet the shooters’ increasing demand for high quality fiber optic sights LPA has developed the TTF series. TTF sight sets are machined from solid steel using state-of-the-art CNC milling. Improve your firearm with a fiber optic TTF sight set! Features:• streamlined design and compact low profile• micro-metric adjustment for windage and elevation provided by hardened click screws• tapered dovetail for a strong locking in the existing groove• allen wrench and adjustment screwdriver included in the package• fiber optic blade and front sight with replaceable fiber insert included.
Glock 17,19,20,21,22,23,25,26,27,28,29,30,31,32 ,34,35
A.R.M.S.® #31™ Aimpoint Micro Mount Throw Lever® Mount for the Aimpoint T-1 Micro sight
The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection-molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15 / M16 platform. An elevation adjustment tool is included, but most aftermarket A2 front sight adjustment tools may be used as well.
Warren Tactical Series sight design is void of sharp corners, serrations, undercuts, and odd angles because they are distracting!
The patented, curved rear profile, called the "Waive Design" and the radius corners of the rear notch combine to quickly direct the shooter's vision upward toward the front sight and the target / threat.
The Waive Design also allows faster "target to target" transitions. Plus, with the long outer corners of the rear sight removed, the shooter can see more of the target / threat area clearly. Front sight height: 5.5mm (0.215”) Front sight width: 3.2mm (0.125”)
Dimension explanation: 1x5.25x2.5
- 1 = 1mm fiber
- 5.25 = Height
- 2.5 = Width (if there is no number, the sight is standard width)
Pimp your AR !!! Toni System is the adress to look for functionality, quality and design.
To enhance and speed up the handling of your AR, look no further, TONI System has the right parts.
The WM25 offset mount securely attaches your light to Picatinny and Weaver rails. It is lightweight and constructed from precision machined aluminum with an anodized black matte finish. The WM25 is an economical and effective way to mount any 1 inch flashlight on your weapon.
Height adjustable rear sight for CZ75 TACTICAL SPORTS and CZ75 TS ORANGE. Ideal for IPSC. No lateral adjustment. Required front sight height 6.5 mm or more
To personalize your AR you can choose different colors.
"Looking for rock solid stability and dead-on accuracy in a fixed sight? Troy Industries Fixed BattleSights™ get the job done. This permanent, rail-mounted alternative to a standard A2 sight allows limitless mounting options on all-length rails with a serrated ramp to eliminate glare. Provides a continuous zero, unflinching durability and peace of mind.The Troy Rear Fixed Rail Sight is designed to work on same plane rail systems only. Will not work with a railed gas block that is higher or lower than the receiver.
Troy BattleSights™ set the world standard for performance and durability. Now, Troy has developed a rugged low-profile sight designed for firearms with top rails higher than the standard M4. For shooters who favor a sightline that’s as close to the barrel as possible, or for those with raised top rail systems, the Troy Micro BattleSight provides an ideal solution.The Troy Micro BattleSight greatly enhances weapons such as the new IAR, the Sig Sauer 556® Pistol and Carbine, POF 416®, FN Scar®, Robinson Armament XCR®, Heckler & Koch 416® & 417® and other weapons with raised top rails. Troy Micro BattleSights are rugged, reliable and BattleReady™.Sold as a set only.
Available in Black
Durability and dead-on accuracy make Troy BattleSights™ the hands-down first choice of Special Ops and Tactical Users Worldwide. Troy’s HK Front Fixed BattleSight, a permanent, rail-mounted alternative to a standard A2 sight, allows limitless mounting options on all-length rails with a serrated ramp.
Durability and dead-on accuracy make Troy BattleSights™ the hands-down first choice of Special Ops and Tactical Users Worldwide.Troy’s HK Front Folding BattleSight is easy to install and deploy, with no levers or springs to fumble with. No tools required for adjustment.
The T-MAS7 is available in red fiber optic or fully black and can be easily changed without any special equipment. Both MAS7 and T-MAS7, once closed and off, have no sharp edges that can cause the entanglement or snagging of the gun. The T-MAS7 Sight series is manufactured from all steel and some aluminum alloy parts. This is a Professional Quality Tactical Sight Set; Not a Polymer / Plastic. Folding adjustable set (Front and Rear sight options sold separately) which is also removable for rifles / Lon-guns equipped with weaver and / or picatinny rail. This front sight is used in conjunction with the folding rear sight (MAS7) that incorporates a solid and fast opening and closing mechanism, engineered to ensure a compact and snag resistant design.
MAS5COM
MAS5: Hexagonal screw for micrometer windage adjustment. In the folded position, the MAS5 is equippedwith a fixed sight for close shots. Hexagonal screw for micrometer height adjustment. In the folded position, the T-MAS5 is equipped with a fixed sight for close shots.
MAS7COM
MAS7COM is a revolutionary folding adjustable set which is also removable for assault rifles equipped with weaver and / or picatinny rail. The set consists of a folding rear sight (MAS7) that incorporates a solid and fast opening and closing mechanism, engineered to ensure a compact and snag resistant design. MAS7 provides 4 ghost rings of different diameters that can be selected instantly by washer with a selector switch, allowing always to have the best precision in relation to the distance of the target selected. In addition, the MAS7 rear sight allows a click micrometer windage adjustment by a special device of ambidextrous knobs. In combination with the rear sight the innovative folding front sight T-MAS7 allows adjustment of the height by a click washer inserted into the main body of the front sight, providing a precision adjustment immediately by hand without special equipment needed. The T-MAS7 is delivered with red fiber optic post and fully black post, it can be easily changed without any special equipment. Both the MAS7 and the T-MAS7, once closed and off, have no sharp edges that can cause the entanglement or snagging of the gun. This set is partially constructed of steel and partly of aluminium alloy to make MAS7 and T-MAS7 designed to combine the action and the light on the rifle.
To meet the shooters’ increasing demand for high-quality sights LPA has developed the SPR series. The SPR sight sets are machined from solid steel using state-of-the-art CNC milling. Improve your firearm with an SPR sight set!
LPA sights for all new models of S&W revolver with drilled and tapped frame for S&W scope. After having disassembled the standard sight, the TXT has to be fitted on the gun by means of two screws supplied into the blister pack!
BUL front sight with optic fibre for 1911 / 2011 models with Standard BUL Dovetail.
BUL Factory Sport Micro Sight rear for 1911 / 2011.
AR15 Flip up front/rear sight set
AR15 45 degree offset flip up sights front and rear set
The MBUS Pro (Magpul® Back-Up Sight) is a corrosion-resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size. The dual aperture, windage adjustable Rear and no-tool, elevation adjustable Front Sights excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks.
While other sights give off a hazy glow making it difficult to focus, DP sights offer you the sharpest picture. We counterbore the blade so the optic is recessed.
.125T/.090W Pardtidge Serrated
Dawson Precision Glock Gen5 G17/G19 Competition Fixed Sight Set is unique to the Glock Gen 5 G17/G19. The Gen 5 Glock requires different sight heights due to barrel lockup and type.
Dawson Precision Glock fixed carry sight set: Fiber Optic Rear: .225T x .125 Notch Width, Fiber Optic Front: .205Tx .105W
Pistol sights
Rifle sights
