Select brand
 
Brand

ADVANCED SEARCH

Reloading & ammunition

28.68  
In stock
+

38.53  

For almost a hundred years, Vihtavuori powders have formed the heart of many of the world’s most renowned cartridges. Reloaders know they can trust in the performance and uniform high quality of Vihtavuori smokeless powders  – cartridge after cartridge – to create a perfect product for successful shooting. When choosing our reloading powder you know your ammo is up to the task, even in the toughest conditions. Go ahead, take Vihtavuori and make the perfect shot.


16.31  
Hi quality case lube makes shure your reloading is as smooth as possible and minimizes undue stress on your machine. Spray and mix your cases so they get lubed and than air dry for a day or two to make shure youre cases are completely dry before reloading. Dont worry the lubricant doesnt dry up but rather makes a film on the cases so they have less friction when in contact wirh the dies.
In stock
+

15.57  
Designed exclusively for the lubrication of cases of any material, whether they are intended for rifle or pistol calibers, XCL will be of great support in both resizing and decapping operations, and finally it will leave a film along the walls of the case so thin as to be barely perceptible to the touch.
In stock
+


154.92  

Until now, reusing military brass, with its crimped primer pockets, has been a tedious task. The Dillon solution is a remarkably simple device that bolts to your bench and allows you to swage the primer pockets with speed and ease. The case is supported from the inside, so you won't be tearing the rims off the brass. A tool steel, hardened swage rod (easy to change from large to small primers) simply rolls the crimp away. No reaming is necessary. Our unique compound cam leverage system assures not only ease of operation, but perfect alignment with each and every round. Sound simple? It is and it works. What's more, it's inexpensive. The Super Swage 600 comes with large and small swage rods, .22 and .30 caliber backup rods, and a 45ACP adapter. 

In stock
+

56.56  

The Shell Sorter™ is a simple product designed to reduce the time spent sorting brass by caliber, allowing you to enjoy more time reloading and shooting.

The Sorter simply sits on top of a common 5 gallon bucket, with a few shakes your brass is sorted by caliber. The Shell Sorter™ is comprised of three pans designed to sort several common calibers.

The three main calibers that most reloaders sort are 45 ACP, 40 S&W, and 9mm. We have labeled the sorters according to those three main calibers. The sorters do sort many more calibers!

The fastest way to sort is to stack all three of the pans together with the yellow pan on top, and the black on the bottom, in that way all your brass is sorted at the same time.

If you sort before tumbling as is recommended, most shells that are inside of each other will come apart with the shaking and are sorted correctly. However, if you tumble first, those are likely to jam together with small bits of media, and sometimes those require pliers.

The sorters can also take the place of your media sifter. Just tumble, pour your brass into the appropriate sorter(s), shake a bit, your media is in the bucket, and your brass is ready for the next step.

You can use this on the range so that you only bring home brass in the calibers that you reload.

The Shell Sorter™ is made of ABS, a very strong plastic which will give a lifetime of service. We placed a sorter underneath a car tire, and it didn't break or distort! In fact, it still worked!

Always wear gloves and a dust mask when working with used brass because of the levels of lead dust present.


245.08  
S&B 9x19 Ammo Pack 1000pc
In stock
+


85.25  
In stock
+

45.08  

S&B .223Rem FMJ rifle amunition with 55grn bullet.

In stock
+

942.62  
The DC Electric Drive Rollsizer is suitable for the low to medium volume reloader. The DC electric rollsizer produces a similar result as the large scale rollsizer but at a lower cost (and processing rate – 1500 Cases per hour vs 6,400 cases per hour). The DC rollsizers require a minimum run in period of 2-6 hours before use but may occasionally need longer time (up to 12 hours). Running them unloaded overnight is usually best.

1,357.30  
The Rollsizer.com Decapper will process 380ACP cases up to 308Win. The machine will remove the spent primers up to 3,600 cases per hour (if your casefeeder can keep up) and cases can be processed soiled.  You can wet clean your cases afterwards, then rollsize your cases. This will save you a LOT...
In stock
+

89.34  
Disc to suit to suit 9×19. This conversion uses a small pistol drop tube.

28.69  
FW Arms Small Decapper pin (0.054″ size) to suit Decapper. These MUST be installed per the instructions detailed in the FW arms instruction manual supplied with the decapper.
In stock
+

28.69  
These same drop-tubes are used in the Rollsizers (commercial, DC and manual) and the automatic Decappers offered by Rollsizer.com. The tubes are made of steel, and are machined to fit the calibers in use. Height adjust of the tube is required when converting calibers.
In stock
+

40.70  

Spare parts kit specifically for your RL550 machine keeps your machine running also when you had a little accident. Don't risk downtime waiting for a replacement parts! Contains everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.

In stock
+

85.00  
Product description This 3-Die Carbide Roll Crimp Set for straight cases consists of a carbide Sizer Die, an Expander Die and a Seater Die. The Carbide Sizer Die has a carbide ring that eliminates the need for lubing the case that needs to be sized. This Die also removes the primer....

105.00  

This RC-tech 150rd gauge is designed to be used to gauge 150 rounds 9x19 at once. It comes with a cover plate that you use to transfer the rounds into RC-tech FOOD4GUNS Ammo Box for 9mm 150rdsDesigned to check the diameter of your ammo, so you can be 100% sure, you will have no malfunctions when on the range or at a match.

In stock
+

7.37  

FOOD4GUNS ammo boxes by RC-tech are designed to hold 150rd of 9mm ammo. As experienced shooters we found that the capacity of 150rd is more practical for shooters and is perfect for all matches. 1 box holds enough ammo for a small match, if you need more ammo simply take 2-3 boxes. Made from high quality injection molded plastic, these boxes feature a sturdy hinge design and come in 6 awsome colors.

Play with different colors, to assemble youf flag, and for better organisation of different loads.

In stock
+

7.37  
In stock
+

8.12  
This pocket size 1 case gauge is perfect for the range. It is ideal for shooters who want to ensure better reliabitiy of their ammo in chambering and extracting on the range. The Chamber Gauge is machined from the finest aluminum. This Chamber Gauge is specifically designed for your pocket to...
In stock
+

6.55  

In stock
+

22.94  

Handy pouch for carrying rounds and magazines to and from the range. This is an essential piece of kit that allows you to carry rounds and magazines together in one bag.

In stock
+
1 2 3 4 5 6 7 8
2 - 14