Select brand
 
Brand

ADVANCED SEARCH

Reloading & ammunition

4.92  
Aguila .22lr Super Extra: 40grn copper-plated solid point 1,255 FPS
In stock
+

6.15  
Aguila .22lr Subsonic: 40grn lead bullet solid point 1,025 FPS
In stock
+

45.08  

S&B .223Rem FMJ rifle amunition with 55grn bullet.

In stock
+

24.51  

Live Primer Catcher is practical solution to a problem every XL650 press user is familiar with: live primers being ejected out of the press and falling to the floor. The original ramp on the press does not do a great job catching those live primers as they are ejected. And even if they stay on the ramp, retrieving them without dropping some can be challenging.

In stock
+

16.31  

Primer chute for spent primers replaces the blue plastic spent primer cup and bracket on the Dillon XL650, 750 and Super 1050/1100 reloading press. It completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers. Spent primers are routed through clear PVC tubing into any convenient waste container.

In stock
+

7.21  
Dillon 650 live primer upgrade. Stop ramp for live primer chute. Fits reloading machine dillon XL650. Just put it on your existing live primer chute. 3D printed from on high-end printer with high quality ABS plastics.
In stock
+

20.41  

Install by slipping this on the top back side of your case feeder and fits to the Dillon Case feeder 550 / 650 / 750 / 1050 / 1100 or Hornady LNL AP Bullet / Case feeder support tubes.

In stock
+

36.80  
High quality LED (light emitting diodes) for Dillon progressive presses are embedded in machined aircraft grade aluminum, and are super easy to install. The bright dual LED drop in module helps you easily check your work while its minimalistic design ensures an unobstructed workspace.
In stock
+

245.82  
This toolhead for Dillon Super 1050 is a real game-changer. It is a drop-in upgrade for the original toolhead with great new features.
In stock
+

16.31  

Powder Funnel for activating the Dillon automatic powder system. An essential component for reloading 9 mm family of calibers with any bullet-feeder system with your Dillon powder measure. It prepares the brass correctly so that the bullet can be seated in the case, and not tip over as you index the shell plate.

In stock
+

7.21  
Primer follower rod holder is compatible with the current model Dillon XL650, XL750, RL550 and Super 1050 (probably a few others too that have the 9/16-18 thread). Ample room in the hook area for those with weighted follower rods too.
In stock
+

10.49  
Simply attach this Hex Key Holder to your casefeeder rod and keep your hex keys organised. There is also some space for pins.
In stock
+

7.21  
Locks the case feed shuttle back to prevent cases from feeding into the shell plate when cycling the press.  Simple installation in seconds.  It's great for clearing the shell plate, maintenance, setup, or any time you don't want cases to feed.  Clips to the frame when not in use so it's always easy to find.
In stock
+

11.39  
With the Dillon Case bin stopper in place, you can use 100% of the cartridge collection bin's capacity!
In stock
+

138.53  

Conversion kits are available allowing you to use your Mr. Bulletfeeder by Double-Alpha for more than just one caliber. Many reloaders have a second complete tool head for their 2nd caliber of choice, voiding the need to reset the dies. To make the transition easy, the Mr. Bulletfeeder by Double-Alpha conversion kits includes a complete dropper assembly, a custom powder funnel (for pistol calibers) and a new collator plate for the caliber of choice. This will allow you to switch your bullet feeder from one caliber to the next in a matter of minutes. 

In stock
+

36.80  

If primer does not explode when hit by firing pin then most common reason is that primer is not seated deep enough. This problem is quite common in new XL750 since orginal primer punch spring is a little to long and primers are not seated deep enough. Armanov solution to this problem is new Index Cam Block with integrated ball bearing and adjustable primer seating depth stop.

In stock
+

26.23  

Constructed from durable 1050D Nylon on the base and 500D Nylon for the primary compartment, the Range Master Bucket Bag is a drawstring closure bag with cord lock and top carry handle. Carry unboxed ammunition, a whole harvest of magazines, or collect up your brass in it. Gas ‘em up when you need to.

In stock
+

31.70  

This enhanced heat-treated toolhead washer and hex key bolt reduces any flexing of your toolhead, increasing the rigidity and potentially the consistency of your ammunition. This works on the RL1050 and Super 1050 as well as the RL1100 loader. Requires a 1/2" hew key wrench to install and remove the bolt.

In stock
+

36.80  

Armanov Stackable Case Gauge for .223 REM or 5,56 x 45 mm or .300 AAC Blackout ammo, made to tight tolerances SAAMI specification. Machined from top quality aluminum with high tolerances so you can sort out any faulty round instantly. It’s smartly designed to double also as OAL checker when you lay it on flat surface. Since most malfunctions are ammo related, and most of those relate to deformed, bulging or otherwise defective brass – dropping the bullets into a gauge is an effective way to save time, trouble and reduce the chance of costly malfunction. Price is for 1 piece (10 rounds).

In stock
+

38.93  

The DAA Infra-Red Low Powder Sensor is an efficient, high-tech solution to a problem every reloader has encountered: Making sure to fill that powder hopper in time, before you accidently load empty cases without powder… (don’t feel stupid, we’ve all done it…)

In stock
+

245.08  
S&B 9x19 Ammo Pack 1000pc
In stock
+

8.16  

Since we introduced our DAA Turbo Case-Feeder Plate for the Dillon case feeders, we’ve had Mark-7 customers asking us if they could use it with their High Speed 11” Mark7 case feeder (as supplied with the Apex-10 press). The answer is YES! The disk is the same size and it works great in the excellent Mark-7 case feeder. 

In stock
+

32.38  

The DAA Primer Pickup Tubes are made of the highest quality aluminum, produced using custom-made extrusion tools and tightly controlled for accuracy and finish. Close attention is paid to the consistency of the internal and external chamfering to ensure optimal feeding. The matt-finish anodizing makes identifying the primer size immediate, while giving these tubes a striking attractive look.

In stock
+

10.57  

Primer Stop Block for Dillon Precision XL750 Progressive Reloading Press. Comes very useful for operations when no primer insertion is required. The block prevents movement of the primer slide bar. Super simple installation by simply inserting the block between the pin on the slide and primer feed body. When not in use attach it to the steel primer tube by the magnet

In stock
+

58.93  

Bushings are made for a quick, simple and precise change of dies in the toolhead. No need for a complete toolhead change anymore, just twist and replace any bushing with the die of your choice. Change six dies on a Dillon Super 1050 / RL 1100 in seconds!

In stock
+


77.87  
Combines the world's most popular carbide three-die set with the Lee Carbide Factory Crimp Die at a great price. No other die set at any price will produce more reliable or accurate ammo. By separating the seating and crimping operation, you will benefit by a greatly simplified adjustment....

13.22  

Kit contains QTY 5 of 301-1178 Shell plate springs 0.094" Dia, 0.018" Wire Dia, 302 SS cut to approximate length.

Also contains QTY 2 1" sections of 201-1210 Case Retention Spring 0.125" OD, 0.02" Wire Dia

In stock
+


6.15  
In stock
+

4.92  
In stock
+

53.20  

This toolhead is required for use with RT1500 Electric Case Trimmer. This combination is commonly used to trim 300 AAC Blackout on the XL650 & XL750.

In stock
+

442.62  

The LEM Electromagnetic Case Cleaner offers a new level of brass case cleaning performance. This new case cleaner gets brass MUCH cleaner than ultrasonic or tumbling methods.

In stock
+

22.94  
XL750 Dillon Ring indexer (does not fit XL650)
In stock
+

40.94  

The DAA Turbo Case-Feeder Plate is a highly modified and evolved reloading accessory which will greatly increase the output speed of your current Dillon case feeder. The plate is designed to handle all pistol calibers – from .380 to 0.45, so one plate can now handle all your pistol calibers!

In stock
+

8.19  

The DAA Dislodge-Wedge is designed to be much larger and longer than the original Dillon part, reaching down to the very base of the plate, and providing a more gradual, angled surface to clear stacked cases as the disc rotates, at any speed.

In stock
+

311.46  
Lyman Pro dies will set a new standard for reloading die performance! Designed for the tremendous volume of our Mark 7 presses, every aspect of these precision dies was carefully engineered for top performance. Of course, they work great in regular progressive presses as well as turret and...

763.93  

Stock Number: 75076
The Dillon XL750 is a high-speed progressive reloading machine designed to load common rifle and handgun cartridges, from 17 Hornet though the common belted magnum cartridges in rifle, and 32 ACP through 500 S&W in handgun. Machine height from the bench is 32" without the optional electric case feeder, 38 1/2" with the electric casefeeder installed.


Dillon site: https://www.dillonprecision.co...



24.51  

Eemann Tech Springs Kit for Dillon XL650.

In stock
+

15.16  

Eemann Tech Springs Kit for Dillon RL550.

In stock
+

14.34  

Eemann Tech Springs Kit for Dillon RL1050.

In stock
+

48.36  
    The PrimerSense® Low Primer sensor takes the guess work out of your loading operation by alerting you when you are low on primers mechanically.  The Mark 7® unit already has a programmable stop due to low primers that you enable from the included computer tablet.  Install this...

282.79  

This toolhead for Dillon Super 1050/RL1100 is a real game-changer. It is a drop-in upgrade for the original toolhead with great new features.

In stock
+

13.93  
In stock
+

85.00  
Product description This 3-Die Carbide Roll Crimp Set for straight cases consists of a carbide Sizer Die, an Expander Die and a Seater Die. The Carbide Sizer Die has a carbide ring that eliminates the need for lubing the case that needs to be sized. This Die also removes the primer....


114.88  
The DAA 550 Mini Case Feeder  will greatly improve the efficiency of your Dillon 550 reloading press!  By automatically feeding the cases into the shell plate, this clever accessory allows you to keep your right hand on the handle as you operate the press, and eliminates the...
In stock
+
1 2 3 4 5 6 7