Wiederladen

SPUD

Designed for the sportsmen on the move, the SPUD features loads of storage room along with molded-in bungee hook receiver so you can strap it down tight to anything, from a fishing boat to an ATV.

The SPUD 7's spacious design offers a whopping 2,073 cubic inches of dry storage. It can carry items up to 14 inches tall. It is also the perfect height (15 inches) for dove and waterfowl blind hunting and as a chair when using MTM's predator shooting table. It also comes with a nylon shoulder strap for hands free carrying. Load one up for the range and then use it for a chair once you get there!

The SPUD 7 offers several features including: Water resistant O-ring seal; top access lid compartment ; deep 2/3 length lift out tray; four Bungee hook receivers; large comfortable handle; thick sidewall construction; heavy-duty snapping latches; and double padlock tabs.

SPUD

No wasted space here. The SPUD  features an 80% usable, top access lid compartment. The compartment contains five sectioned areas where you can keep your small items separate and safe. Many features including: water resistant O-Ring seal; five section lid compartment; full size lift out tray; large comfortable handle; thick sidewall construction; heavy duty latch; and double padlock tabs.

ACR8 Ammo Crate Utility Box

Designed for ammo storage, but perfect for storing shooting, hunting or survival gear. Two extra strong handles make it easy to carry upto 85 pounds of gear. Designed to be stacked high, using molded-in stacking ridges. Four tie down points for ATV attachment. Features MTM's tongue and groove O-Ring seal system for a water-resistant dry storage. Double padlock tabs along with two strong latches make these ammo crates the perfect solution for many storage needs. Made in the USA, with high-impact polypropylene plastic.

ACR7 Ammo Crate Utility Box

• Carry up to 65 pounds of gear with two strong side handles
• Stackable design and double padlock tabbed for security; Four tie-down points on side
• Water-resistant O-ring seal for dry storage; Non-submersible
• 890 Cubic Inches
• Exterior 17.2" x 10.7" x 9.2”(H)
• Interior 12.4" x 8.4" x 8.5"(H)
• The latches are mounted on side for easy carrying; Made in USA

Designed for ammo storage, although perfect for storing shooting, hunting or survival gear. Two extra strong handles make it easy to carry 65 pounds gear. Designed to be stacked high, using molded-in stacking ridges. Four tie down points for ATV attachment. Utilizing MTM's tongue and groove O-Ring seal system for a water-resistant dry storage. Double padlock tabs along with two strong latches make these ammo crates the perfect solution to so many storage needs. Made in the USA, with high-impact polypropylene plastic. Can be used as a boaters dry storage box, first aid, safety and RV camper storage container.

30 Caliber Ammo Can

MTM ammo cans are a great way to store bulk or boxed ammo. Its all plastic design is lighter in weight than the 30 caliber US Military Surplus Ammo Cans. Transferring ammo to and from the range, just became a little easier! Ideal for bulk 45 ammo.

Molded out of rugged polypropylene plastic, these comfortably handled ammo cans will hold up to some pretty harsh treatment. Utilizing MTM's tongue and groove O-Ring seal system for a superior water-resistant seal, the 30 caliber can is designed to fit the same amount of bulk ammo as the originals. A heavy-duty dual latching system makes for a better seal and less likely to open accidentally. Double padlock tabs along with molded-in stacking ridges, make these solid containers the perfect solution to so many storage needs.

Two cans in one, the Can-In-A-Can provides a 50 cal. Ammo Can (AC50) with a 30 cal. Ammo Can (AC30T) packed inside.

50 Caliber Ammo Can

MTM ammo cans are a great way to store bulk or boxed ammo. Its all plastic design is lighter in weight than the 50 caliber US Military Surplus Ammo Cans. Transferring ammo to and from the range, just became a little easier! I deal for bulk 45 ammo.

Molded out of rugged polypropylene plastic, these comfortably handled ammo cans will hold up to some pretty harsh treatment. Utilizing MTM's tongue and groove O-Ring seal system for a superior water-resistant seal, the 50 caliber can is designed to fit the same amount of bulk ammo as the originals. A heavy-duty dual latching system makes for a better seal and less likely to open accidentally. Double padlock tabs along with molded-in stacking ridges, make these solid containers the perfect solution to so many storage needs.

AC11 & AC35 Ammo Cans

This O-Ring sealed ammo can offers the perfect solution to so many storage needs. Made to carry anything from bulk ammo to decoy weights to pet food.

Our Ammo Can easily handles 30 pounds of gear in an easy to transport package. It provides excellent, water resistant protection along with extraordinary durability. Molded out of rugged polypropylene plastic and has a comfortably handle holds up to some pretty rough treatment. The Ammo Can offers a heavy-duty dual latches for better sealing, three padlock tabs and molded-in stacking ridges for slip resistant stacking. Great for protection in basements, garages or storage sheds. The ammo can does not have a tray on the inside.

Inside Dimensions: 7.3”(L) x 12.5”(W) x 7.3”(H)

Inside space of 707 cubic inches

Outside Dimensions: 9.3”(L) x 15.3”(W) x 8.8”(H)

CASE-GARD™ Rifle Ammo Wallets

Hunters, as well as police snipers will appreciate being able to remove bullets quickly and quietly from their jacket or shirt pocket using these 9 round ammo wallets. These boxes hold your ammo securely and also provide tip protection. They come with a textured finish and a MTM 10-year guarantee. They come in 2 sizes small and large.

Small , 17 Fireball,17 / 221 / 222 / 223 Rem, 204 Ruger, 219 Donaldson Wasp, 22BR, 22 PPC, 22 Sav. HP, 220 Rus., 222 Rem. Mag., 22-250, 223 Rem. HP, 224 Wby. Mag., 303 Sav., 30-30 Win., 32-40 Win., 32 Win S. L., 32 Win. Spl., 351 WSL, 6x47, 6mm BR-DX, 6mm Norma BR, 6mm PPC USA, 7.62x39 Rus.

Large, 220 Swift, 243 / 270 / 308 / 348 Win., 250 / 300 Sav., 257 Roberts, 257 / 300 / 340 / 7mm Wby. Mag., 264 / 300 / 330 / 338 Win. Mag., 25-06 / 280 / 284 / 35 / 6mm / 7mm-08 Rem., 300 / 375 H&H Mag., 30-06 Spr., 303 Brit., 30-40 Krag., 308 Marlin Exp., 308 Norma Mag., 333 Jeffery, 35 Whelen, 40-60 Marlin, 40-70 Sharps (Straight), 410 Shotshell’s, 44-40 Win., 445 Super Mag, 45-70 Govt & WCF, 6.5 / 7mm Rem. Mag., 6.5 Creedmoor, 6.5x50 Jap. Arisaka, 6.5x52 Italian, 6.5x54mm Mann-Schone, 6.5x55mm Swedish, 7x57 Mauser, 7x61 Sharpe 7 Hart, 7.5x55 Swiss, 7.65x53 Mauser, 7mm BR, 8mm-06

Lee Replacement decapping pin for Decapping Die (#90292)

When you need to pull some bullets for whatever reason, and impact style tool is the easiest method. Just one stern “whack” and the bullet is separated from the brass. It is that easy. Three different collets are included allowing you to pull bullets  from just about every caliber rimmed or rimless. Versatility makes this bullet puller the only one to have.

LOS copper plated bullets consist of compact lead cores and special thick plating. This gives bullets maximum protection from the lead, making them highly appropriate for shooting in indoor shooting ranges. Bullets are additionally calibrated to achieve the highest possible performance.

LOS copper plated bullets consist of compact lead cores and special thick plating. This gives bullets maximum protection from the lead, making them highly appropriate for shooting in indoor shooting ranges. Bullets are additionally calibrated to achieve the highest possible performance.

LOS copper plated bullets consist of compact lead cores and special thick plating. This gives bullets maximum protection from the lead, making them highly appropriate for shooting in indoor shooting ranges. Bullets are additionally calibrated to achieve the highest possible performance.

LOS copper plated bullets consist of compact lead cores and special thick plating. This gives bullets maximum protection from the lead, making them highly appropriate for shooting in indoor shooting ranges. Bullets are additionally calibrated to achieve the highest possible performance.

LOS copper plated bullets consist of compact lead cores and special thick plating. This gives bullets maximum protection from the lead, making them highly appropriate for shooting in indoor shooting ranges. Bullets are additionally calibrated to achieve the highest possible performance.

To keep your machine running also when you had a little accident.

Spare parts kit specifically for your Super 1050 machine.

Don't risk downtime waiting for a replacement parts!

Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.

Note : The aerosol inside makes it impossible to ship this by air.

Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.
Note : The aerosol inside makes it impossible to ship this by air.

Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included.

This item does not check the accuracy of the powder charge, it checks for double-charges or no-charges only.

Dillon powder body with drop tube #22273

This mount is for both the RL 550 series presses as well as the XL650.  Mount height = 8 1/2"  or 21,6 centimeters.

Raises your press above the work bench level and adds stability due to its larger footprint.

Recommended by lots of reloaders.

Dillon's CV-2001 Vibratory Case Cleaner is the largest in the industry. Its 12-1/2 quart bowl capacity will allow you to polish up to 1,300 .38/.357 or 550 .30-06 cases per hour.
Not only is our capacity greater, but our motor is larger in horse power, internally cooled, thermally protected, and turns on precision ball bearings. This is no "hobby" machine!
The bowl and base are constructed of 7/32" thick injection molded high-strength polypropylene which is impact and abrasion resistant.

Note: Tumblers are not designed for tumbling loaded ammunition.

Caliber conversion is not included.

Super 1050 Quick Change Kits allows you to leave your dies and powder charge set up and dedicated to a specific cartridge for faster, easier caliber changes.  Caliber changes require a caliber conversion kit (sold separately) in the caliber you want to add to your Dillon Super 1050.

This set consists of one Super 1050 powder measure nr. 20421 and one Super 1050 Toolhead nr. 20420. 

Be aware that the ratchet does not interchange between the Super 1050 and the RL1050 due to differences in length. 
If you have an RL1050, order toolhead #19399.

To keep your machine running also when you had a little accident.

Spare parts kit specifically for your XL650 machine.

Don't risk downtime waiting for a replacement parts!

Small Pistol .32, .380, 9mm, .38 Super, .30 Carbine

Large Pistol .40 S&W, 10 mm, .38 Special and larger, 7.62 x 39

Small Rifle .204 Ruger, .222, .223 Remington

Large Rifle .22-250 and larger

CM-2000 Case/Media Separator is large, 25,4 x 35,5 cm and will hold more than 1,600 .38 Special cases. It sits on a large media collection tub that measures 45,7 x 55,9 cm. The tub keeps the mess off the floor and bench. It's fast -- so fast it will remove media from 1500 rounds of .223 brass in a matter of seconds.

Don't risk downtime waiting for a replacement parts!

Don't risk downtime waiting for a replacement parts!

To keep your machine running also when you had a little accident.

Spare parts kit specifically for your Super 1050 machine.

Dillon's accessory handle gives your reloader an entirely new "feel." 
A roller handle reduces operator fatigue during long reloading sessions and makes primer seating easier. Fits the RL550 and XL650 loaders. 

Mistakes happen, so be prepared. Our hammer-style Bullet Puller quickly removes your bullets without damaging the bullet or the case. The rubberized grip is easy on your hands and we have also added a rubber insert inside the hammer tip to make it easy on your bullets. Easy and convenient to use whether checking an occasional  reload or pulling hundreds of bullets.

This Hammer Set comes with 4 collets.

LIFETIME WARRANTY.  MADE IN THE USA.

Collet information:
                                        Pistol                                      Rifle
Black (X-Small) -    .25 ACP                        Small Rifle Calibers
Blue (Small) -           .32 - .380                      17 Rem - 223 Rem
Green (Large) -       9mm - 10mm                       6mm - 8mm    
Red (X-Large) -      .41 - .45 ACP                  Belted Mags - 45-70

Extra powder dies allow you to move your powder measure from toolhead to toolhead without changing the "belling" adjustment.Toolhead not included. These are for the RL550, XL650,and RL450 equipped with the automatic powder system

The Dillon Square Deal B is a compact reloading machine designed to load the common straight walled handgun and carbine cartridges from 32 S&W Long through 45 Colt.

The Square Deal B, which is our most compact machine, has an automatically indexed shellplate and is intended to produce moderate quantities of match-quality handgun ammunition for the user who does not have a need to load bottle-necked cartridges. Dies are included and are factory adjusted to reduce your set up time.

Reloading with Dillon’s Square Deal B is Easy as 1-2-3!

Most shooters realize that reloading is the most economical way to enjoy their sport, but many shooters are unaware of just how simple it is to reload. In fact Dillon’s Square Deal B is one of the easiest progressive loaders in the world to learn to operate. How can we make that statement? Simple. Since all of the reloading steps are performed with a stroke of the handle, there is less to remember (or forget) than with an old-fashioned single-station press.

Dillon's CV-750 Vibratory Case Cleaner is perfect for reloaders with limited space. CV-750 bowl is 12" across, the unit is 12" tall. Capacity of 500 pieces of 45ACP or 38/357, or about 200 pieces of 30-06 brass. All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase. This unit is designed for dry media only.  Use of water or wet media will void the warranty. 

Note: Tumblers are not designed for tumbling loaded ammunition

Don't risk downtime waiting for a replacement parts!

Includes: 1 550 Brass Tip Set Screw, 1 550 Index Ball, 1 550 Index Ball Spring, 1 Seating Punch (Small), 1 Seating Punch (Large), 1 550 Primer Cup Spring, 1 550 Slide Return Spring, 1 Cartridge Spring, 1 Bellcrank Cube, 2 Magazine Orifices (small), 2 Magazine Orifices (large), 2 Pickup Tube (Large, Green tips), 2 Pickup Tubes (Small, Yellow Tips), 2 pickup tube retaining Clips, 1 Failsafe Shoulder Washer, 1 Tinnerman Insert, 4 Locator Pins(one each #s 1,2,3,4), 1 primer cup (small), 1 primer cup (large), 1 ejector wire, 1 toolhead pin, 1 dispensing tip (Large), 1 dispensing tip (Small), spacer bar retaining plug 

Sizing/Depriming Die 
Our sizing/depriming dies feature a unique "floating decap assembly" with a snap spring that throws the spent primer off the pin and eliminates the problem of primer "draw back" that often occurs when decapping military brass. The primary feature of Dillon's size die design the long, tapered carbide ring with a radiused opening remains unchanged. 
That radiused opening, and its importance to progressive reloading, is one of the reasons why our seat and crimp dies are better. We found a way of manufacturing these dies that has enabled us to make the lead-in radius even bigger! The bigger radius makes progressive loading with our equipment even smoother but that's still only a part of the story. 

The ultimate in convenience for keeping your reloading bench clean and uncluttered. You will find in an instant what you need to make the switch from one to another caliber.  

This stand is for the RL550 Series and XL650 machines only.