Reloading equipment

Until now, reusing military brass, with its crimped primer pockets, has been a tedious task. The Dillon solution is a remarkably simple device that bolts to your bench and allows you to swage the primer pockets with speed and ease. The case is supported from the inside, so you won't be tearing the rims off the brass. A tool steel, hardened swage rod (easy to change from large to small primers) simply rolls the crimp away. No reaming is necessary. Our unique compound cam leverage system assures not only ease of operation, but perfect alignment with each and every round. Sound simple? It is and it works. What's more, it's inexpensive. The Super Swage 600 comes with large and small swage rods, .22 and .30 caliber backup rods, and a 45ACP adapter. 

Spare parts kit specifically for your RL550 machine keeps your machine running also when you had a little accident. Don't risk downtime waiting for a replacement parts! Contains everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.

Some Mr.BulletFeeder users have asked for the option to extend the output feed spring, to allow them to position the collator further away, or perhaps position one collator between two presses and use it to alternately feed each machine.

To meet this request we are pleased to offer the output springs and a screw-on adaptor cap which will allow you to attach to your current spring and extend it up to another 38cm.

 Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machinesand the large size (12mm inner diameter) as shipped with the pistol calibers.

 Note that some “do it yourself” supports for the spring will be needed to prevent it sagging under the weight of the bullets. You do need to keep the tube running downwards and prevent bullets from “pooling” in a sagging loop.

Some Mr.BulletFeeder users have asked for the option to extend the output feed spring, to allow them to position the collator further away, or perhaps position one collator between two presses and use it to alternately feed each machine.

To meet this request we are pleased to offer the output springs and a screw-on adaptor cap which will allow you to attach to your current spring and extend it up to another 38cm.

 Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machines and the large size (12mm inner diameter) as shipped with the pistol calibers.

 Note that some “do it yourself” supports for the spring will be needed to prevent it sagging under the weight of the bullets. You do need to keep the tube running downwards and prevent bullets from “pooling” in a sagging loop.

A replacement threaded die body for your Mr.Bulletfeeder by DAA Dropper. This threaded body is compatible with all calibers.

The 2018 Hanger Assembly for the Mr.Bulletfeeder by DAA ships as standard with all new units leaving DAA as of Jan 2018.

Should you wish to upgrade your current hanger assembly (the one with the round Delrin pucks and aluminum rods) you can do so by purchasing this new hanger separately. It is reverse-compatible with all previous Mr.Bulletfeeder by DAA units.

The new hanger is a simplified design, which makes assembly and adjustments to the tilt angle easier and faster to make. The Horizontal aluminum bracket clamps directly onto the motor gear box, allowing for easy assembly on either the left or the right side of the collator, to accommodate your specific position mounting needs.

The vertical piece hangs over the side of your case feeder, and connects to the horizontal bracket by means of a large M8 bolt, which can be loosened and rotated for tilt adjustments.

Sturdy attachment to the collator, a simplified design with fewer parts, thick aluminum profiles and way fewer screws make this hanger simpler and easier to setup and adjust.

Note: Machine NOT included - only Hanger. 

The Dropper Assembly is needed for shooters who wish to set up a second tool-head in the same caliber, and wish to quickly transition from, say, 9mm to .38super. Or from one 9mm bullet to another. A change is needed to the collator parts, and if a 2nd tool-head is to be used on the progressive reloader, it is quicker and easier to leave an adjusted Mr.Bulletfeeder dropper on each tool-head. This allows for quick swapovers, without the need to calibrate or adjust the dropper. Note that in most cases you will need to purchase an additional Powder Funnel for your second tool-head’s powder measure, as our expanding powder funnel is required for troublefree reloading.

The Mini Mr.Bulletfeeder by DAA uses a 6-tube magazine system which holds roughly 100 bullets. It feeds into the same brilliantly reliable dropper die assembly as used on the Mr.Bulletfeeder.

Kit contains QTY 5 of 301-1178 Shell plate springs 0.094" Dia, 0.018" Wire Dia, 302 SS cut to approximate length.

Also contains QTY 2 1" sections of 201-1210 Case Retention Spring 0.125" OD, 0.02" Wire Dia

Mark 7® 650 PRO Autodrive

Differentiating Features  

• Includes the Mark 7 Optical Decapping Sensor - a $200 value !
• Completely compatible with Mr. Bulletfeeder and GSI bulletfeeders
• Broad caliber capacity - able to load a wider array of calibers including larger rifle calibers
• Small footprint
• Digital clutch - adjustable on-the-fly from 0 to 20
• Digital primer depth setting - no more guessing !
• Digital jog and immediate stop
• Microprocessor monitored and controlled
• Includes pre-loaded computer tablet - no control boxes!
• Features monitored by computer
• Downloadable software upgrades for life
• Supports a variety of accessories
• User-configurable Dwell time at the top of the stroke as well as the bottom
• Easy Installation
• Pre-assembled and shipped ready to use
• CNC grade planetary gearbox
• Full warranty
• High torque motor - same available torque to machine as the 1050 X Autodrive
• Fully Supports International Voltage - this unit operates at 110/220v and at 50/60 Hz with no appreciable variation in speed or performance

Dimensions and Capacity

• Overall machine dimensions are 49" tall (124.4 cm) X 14" (35.5cm) wide x 12" (30.5cm) deep x 1/2" (1.27cm) thick
• True operational height: earlier machines 52.5", later machines 48.5"
• User selectable speeds from 900 to 1,800 rounds per hour
• Quite operation approximately at 75-80 dB including case and bullet feeder

650 Autodrive Specifics

• CNC billet heavy-duty crank
• High torque output
• Mounted on heavy-duty baseplate
• In-line direct-drive operation helps ensure equal amounts of pressure applied to the 650 ram/operation
• Does not include the Dillon Precision XL650 reloading press
• Completely compatible with the leading bullet feeders on the market

The Apex10 reloading press is the evolution of the Mark7 Evolution!

A new and greatly improved press, which builds on and adds to the success and unique features of its predecessor, the Evolution.

This amazing new press offers a massive 10 station tool head, which enables you to “do it all” in one pass.

When you need to pull some bullets for whatever reason, and impact style tool is the easiest method. Just one stern “whack” and the bullet is separated from the brass. It is that easy. Three different collets are included allowing you to pull bullets  from just about every caliber rimmed or rimless. Versatility makes this bullet puller the only one to have.

Eemann Tech Springs Kit for Dillon XL650.

Eemann Tech Springs Kit for Dillon RL550.

Eemann Tech Springs Kit for Dillon RL1050.

Eemann Tech Spare Springs Kit 75111 for Dillon  XL750 Progressive reloading presses. All springs you need from this machine in one package without any no needed parts.

Dillon XL750 is one of the most reliable progressive reloading machines on the market but parts can fail. To prevent downtime on your machine we recomend you having one of this Dillon XL750 Spare Parts Sets at home. This set covers 99% of components that can fail or get lost.

This unit includes the complete allen wrench set, for Dillon XL650/750, RL550.

Mount height = 8 1/2"  or 21,6 centimeters. Raises your press above the work bench level and adds stability due to its larger footprint.

Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included. 

Dillon's new Toolholder fits your XL650/750 and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes a complete allen wrench set plus the one inch bench wrench.

This packcloth nylon machine cover comes equipped with a D-ring, allowing the heavy-duty zipper to be locked.

These lighter weight Aluminum toolheads are machined from billet using the same precise CNC machining as our standard toolheads. Available in four different colors to allow you to quickly differentiate between calibers or load types.

No downtime with Dillon XL650 Spare Parts Set! This set includes everything you need to keep your XL650 operational, no more downtime, no more waiting for parts!

Stock Number: 75076
The Dillon XL750 is a high-speed progressive reloading machine designed to load common rifle and handgun cartridges, from 17 Hornet though the common belted magnum cartridges in rifle, and 32 ACP through 500 S&W in handgun. Machine height from the bench is 32" without the optional electric case feeder, 38 1/2" with the electric casefeeder installed.

Dillon site: https://www.dillonprecision.co...

Dillon X-Small Powder Bar for extra small gunpowder quantities.

A characteristic of virtually all progressive reloading machines, regardless of brand, is that the dies are set rather close together. When you are first setting up a "naked" machine, there is plenty of wrench room, but if you have a need to adjust a die afterward, it often requires a delicate touch to maneuver a lock ring on a crowded toolhead. 
Dillon Precision has addressed this in two ways. We now offer new 1" die lock rings and a 1" Bench Wrench to fit them. This combination gives much more room to re-adjust dies after they're already mounted. The opposite end of our new wrench is a 7/16" box-end for adjusting the Powder Bar of any Dillon Powder Measure. Our new lock rings fit any standard 7/8" x 14 dies.

Includes: 4-Grade 5 Hex Bolts, 4- Nuts, 4 Flat Washers, 4-Fender Washers, 2-Wood Screws.

The Dillon Precision Universal Decapping Die is a standard 7/8"-14 die with a solid, hardened steel, decapping pin in an unlined steel die body.  The Universal Decapping Die allows you to remove spent primers without any resizing of the brass. 

• Works with all standard pistol and rifle cartridge sizes from 22 through 45. 
• Allows you to remove spent primers prior to trimming with our RT1500 Electric Case Trimmer.
• The Universal Decapping die allows brass to be deprimed prior to cleaning when processing brass.  Cleaner primer pockets help to maintain consistent primer seating depth and ignition.
• The Universal Decapping die works in all machines that accept standard 7/8"-14 dies.

Super 1050 Quick Change Kits allows you to leave your dies and powder charge set up and dedicated to a specific cartridge for faster, easier caliber changes.  Caliber changes require a caliber conversion kit (sold separately) in the caliber you want to add to your Dillon Super 1050. 

Don't risk downtime waiting for a replacement part!  Dillon Precision Spare Parts Kits keep your machine running without waiting for replacement parts to arrive in the mail.

Dillon's new Toolholder fits your Square Deal B and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes the complete allen wrench set plus the new Square Deal bench wrench.

Increase the stability of your reloading bench with Dillon's new Strong Mounts. These heavy gauge steel Strong Mounts increase the machine's "foot-print" to over 10", spreading the load over the bench instead of stressing the leading edge. 

Don't risk downtime waiting for a replacement part! Dillon Precision Spare Parts Kits keep your machine running while you wait for your replacement parts to arrive in the mail.

Dillon Square Deal B Primer slide bearing.

Quickly and easily convert your Square Deal B from one cartridge to another with the Square Deal B Quick Change and a Caliber Conversion Kit, sold separately.

Kit Includes:

• Toolhead
• Toolhead Stand
• Powder Measure
• Powder Die

Square Deal B Caliber Conversions allow you to change from one caliber to another in minutes.  Caliber conversions are available for common straight walled handgun and carbine cartridges from 32 S&W Long through 45 Colt.

The Dillon RL550C is the most versatile reloading machine in the Dillon Precision Products line.  It will accommodate the widest variety of cartridges from 32 ACP up to 338 Lapua, 416 Rigby, and 460 Weatherby.

The RL550 has a manually indexed shellplate making it easier to master the various steps of reloading. Manual indexing also gives the operator greater control over each individual step in the loading process. Caliber changes are simple and require fewer parts than other machines which makes it less expensive to convert to another cartridge.

Reloading with Dillon’s RL 550 is Easy as 1-2-3!

Most shooters realize that reloading is the most economical way to enjoy their sport, but many shooters are unaware of just how simple it is to reload. In fact, Dillon’s RL 550C is the easiest progressive loader in the world to learn to reload with. How can we make that statement? Simple. Since all of the reloading steps are performed with a stroke of the handle, there is less to remember (or forget) than with an old-fashioned single-station press.

No dies are included with the RL550!

Don't risk downtime waiting for a replacement part! Dillon Precision Spare Parts Kits keep your machine running while you wait for your replacement parts to arrive in the mail.

With a quick change assembly and a caliber conversion kit (sold separately), you can convert your RL 550 Series press from one caliber to another in less than a minute. 

Includes: 

• Powder measure
• Powder die
• Toolhead 
• Toolhead stand

An automatic casefeed system, similar to the one used on Dillon's commercial-grade Super 1050 machine and the XL 650, is now available for your RL 550 series press.

The ultimate in convenience for keeping your reloading bench clean and uncluttered. You will find in an instant what you need to make the switch from one to another caliber. 

Dillon's new tool holder fits your RL 550 machine and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes the complete allen wrench set plus the one inch bench wrench.