Accesories

Designed to be used XL650/XL750, Suepr1050/RL1050/RL1100. The speed of the casefeeder is controlled by a potentiometer on the casefeed funnel. It allows you to infinitely regulate the speed from 0 to 8 RPM. The motor features a universal power supply for both domestic and foreign voltages. Adaptable to either 110 or 220 Volt, 60 or 50 hz, you simply swap out the plug to the style appropriate to your region. The bowl has an adjustable window cuff and cases deflector, for a larger range of cartridge capability. 

Powder measure knob for the Dillon Powder thrower with click for easy adjustment. Unlike other competitors, this knob is laser etched with 50 graduations giving the user reference points when adjusting. Two steel spring loaded balls generate smooth and repetable clicks. Easy to setup between multiple loads or even calibres, very precise 50 clicks per turn. 

Sizing/Depriming Die
Our sizing/depriming dies feature a unique “floating decap assembly” with a snap spring that throws the spent primer off the pin and eliminates the problem of primer “draw back” that often occurs when decapping military brass. The primary feature of Dillon’s size die design the long, tapered carbide ring with a radiused opening remains unchanged. That radiused opening, and its importance to progressive reloading, is one of the reasons why our seat and crimp dies are better. We found a way of manufacturing these dies that has enabled us to make the lead-in radius even bigger! The bigger radius makes progressive loading with our equipment even smoother but that’s still only a part of the story.

Bullet Seating Die
Our new quick-disassembly seat die allows the user to disassemble and clean the seat die without losing adjustment. In this manner, bullet lube and shavings can be quickly removed from the die, thereby guaranteeing a constant seating depth. We’ve incorporated a “flip-flop” seating stem and a clip that enables you to remove the die insert and change the seating stem from round nose to semi-wadcutter without unscrewing a seating stem out of the die body. We’ve always included both types of seating stems, but the new double-ended design makes it a simple matter to remove a pin, reverse the seating stem, make any minor seating depth adjustments that may be necessary and go on loading in a fraction of the time it used to take.

Crimp Die
We’ve made it easy for you to remove the die insert for cleaning without having to change the critical crimp adjustment. Once your crimp die is set for the proper amount of crimp, you’ll never have to change it. This is especially good news for all of you who load lead bullets! Before, you had to unscrew the die from the toolhead and disassemble the die in order to remove any bullet lube or lead residue. Then, you had to start from square one to re-adjust the crimp. Those days are over. All you have to do now is pop a clip and the die insert drops into your hand for cleaning.

NOTE: All Dillon Pistol Die sets include our sizer/ decap die, seat die and a separate crimp die. (Taper crimp for autos; accu-crimp for revolvers.)

The DAA Bullet Puller is a must-have for serious reloaders. This tool takes all the hassle out of separating your used cases from the bullet and powder. The tool itself is formed from high-quality plastic with an aluminum rod to ensure many years of durable performance.

The DAA Bullet Puller can be used for ammunition of all sizes ranging from .17 Remington to .50/70 Government cases. This tool comes with an extra set of three collets, should the originals happen to break. The tool itself is virtually indestructible and makes quick work of disassembling your ammunition for reloading.

Armanov Quick Disconnect replaces original Dillon Powder Measure half-ring retention.

he DAA Output Chute can be attached to any reloading press, hanging onto the same bracket which usually holds the Akro-Bin, and replacing it.

The long, 120cm (4ft) feed spring enables you to run the ammo down to a container on the floor, sparing you the need to empty that bin as you reload, and uncluttering your reloading press.

The DAA Infra-Red Low Powder Sensor is an efficient, high-tech solution to a problem every reloader has encountered: Making sure to fill that powder hopper in time, before you accidently load empty cases without powder… (don’t feel stupid, we’ve all done it…)

Rolling Handle for XL650/750 and RL550.

DAA XL650/750 Debris-Out Casefeeder Adaptor, which replaces the original Dillon case feeder adaptor on your press, the slots cut in the pipe allow the debris to fall out the sides onto the small collection tray and the chances of a jam-up are greatly reduced.

No downtime with Dillon XL650 Spare Parts Set! This set includes everything you need to keep your XL650 operational, no more downtime, no more waiting for parts!

The DAA Powder-Spill-Prevention (PSP) Brush is a simple yet efficient reloading accessory that solves a real issue: How to prevent small amounts of powder being spilled out of the case, as the tool head of the progressive reloading press indexes?

Primer cam Index Stop Switch for Dillon Precision XL650 and SL900 Progressive Reloading Press. The switch moves to turn ON and OFF the index by bypassing the indexing lever on the primer feed assembly.

Mount height = 8 1/2"  or 21,6 centimeters. Raises your press above the work bench level and adds stability due to its larger footprint.

Dillon RL550 will produce match-quality ammo for over 160 different rifle and pistol calibers. These kits fit the RL300, RL450, RL550 series, AT500 and BL550 machines.

Stop switch enables you to lock the case feed shuttle back to prevent cases from feeding into the shell plate when cycling the press. Easy installation. Just screw with two original bolts. Built in hinge made for super easy usage, cycle machine to down position and enable stop switch. Built in bulge that locks switch in case ON position.  Great for clearing the shell plate, maintenance, setup, or any time you don’t want cases to feed.  Made from high quality steel. This product is suitable for Dillon 1050 only.

Dillon Precision Primer Magazine Tube Small SD/550/650/750/1050/1100.

NOTE:

• 14024 is only one plastic end piece.
• 22030 comes in a set of 1 magazine tube and 2 plastic end pieces.

The DAA Magnetic Powder Check 2.0 (US Pat. Pending) is a great addition to any progressive reloading machine, helping to ensure the quality and safety of your reloaded ammo. The unique new design uses a high-tech Reed Sensor and a magnet assembled to the plunger Rod, to assess if the charge in the case is of the correct height.

As any reloader knows, adjusting a die on a tightly spaced tool head can be difficult and aggravating. The die nuts and various machine parts do not allow easy access and using regular wrenches can be near impossible. The DAA 1 Inch Box-End Wrench is the solution to this problem! The custom made, laser cut, stainless steel wrench is strong enough to last a lifetime and thin-walled enough to fit between any dies for easy access and adjustment.

The DAA Powder-Spill-Prevention (PSP) Brush is a simple yet efficient reloading accessory that solves a real issue: How to prevent small amounts of powder being spilled out of the case, as the tool head of the progressive reloading press indexes?

Carbide sizing die 9MM Luger Carbide Full Length only. No case lube needed.

Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included. 

The Dillon Precision Universal Decapping Die is a standard 7/8"-14 die with a solid, hardened steel, decapping pin in an unlined steel die body.  The Universal Decapping Die allows you to remove spent primers without any resizing of the brass. 

• Works with all standard pistol and rifle cartridge sizes from 22 through 45. 
• Allows you to remove spent primers prior to trimming with our RT1500 Electric Case Trimmer.
• The Universal Decapping die allows brass to be deprimed prior to cleaning when processing brass.  Cleaner primer pockets help to maintain consistent primer seating depth and ignition.
• The Universal Decapping die works in all machines that accept standard 7/8"-14 dies.

Primer chute for spent primers replaces the blue plastic spent primer cup and bracket on the Dillon XL650, 750 and Super 1050/1100 reloading press. It completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers. Spent primers are routed through clear PVC tubing into any convenient waste container.

Super 1050 Quick Change Kits allows you to leave your dies and powder charge set up and dedicated to a specific cartridge for faster, easier caliber changes.  Caliber changes require a caliber conversion kit (sold separately) in the caliber you want to add to your Dillon Super 1050. 

Don't risk downtime waiting for a replacement part! Dillon Precision Spare Parts Kits keep your machine running while you wait for your replacement parts to arrive in the mail.

Powder funnels to activate the Dillon automatic powder system. 

Funnels labelled "oversize"require the separate XL Powder Die #21253 

Order from the drop down menu below. 

• Caliber Conversion Chart for the RL300, RL450, RL550 Series, AT500 and BL550  
• Caliber Conversion Chart for the XL650
• Caliber Conversion Chart for the Super 1050
• Caliber Conversion Chart for the Square Deal B 

Powder Baffle for Dillon is a must have reloading accessory that dramatically increases powder load consistency and accuracy! 

Eemann Tech Springs Kit for Dillon RL1050.

Spare parts kit specifically for your Super 1050 machine keeps your machine running also when you had a little accident. Don't risk downtime waiting for a replacement parts! Contains everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.

Free Float Lock Ring for Dillon Toolhead allow the sizer and seater dies to float. This floating action allows the dies to center themselves exactly over each cartridge for the best possible alignment and more concentric ammunition. This free float lock ring will only fit with free float toolheads for Dillon XL650 / XL750 or RL550..

Live Primer Catcher is practical solution to a problem every XL650 press user is familiar with: live primers being ejected out of the press and falling to the floor. The original ramp on the press does not do a great job catching those live primers as they are ejected. And even if they stay on the ramp, retrieving them without dropping some can be challenging.

Lee Replacement decapping pin for Decapping Die (#90292)

Double the capacity of your Dillon powder hopper with this clear PT extended Hopper. The Hopper measures 36cm long and replaces the 18cm long Dillon Original.

It assembles in the same way, using the two screws in place on the Dillon.

>span class="s1">An acrylic powder baffle is included with the extended hopper.

1050 users, please note: this hopper it too long to fit under the case feeder on your 1050. You will need to shorten it to fit. The tube can be shortened using a saw or serrated knife. About 9cm need to be cut off to fit under the 1050 case feeder.

Eemann Tech Springs Kit for Dillon RL550.

When you need to pull some bullets for whatever reason, and impact style tool is the easiest method. Just one stern “whack” and the bullet is separated from the brass. It is that easy. Three different collets are included allowing you to pull bullets  from just about every caliber rimmed or rimless. Versatility makes this bullet puller the only one to have.

Don't risk downtime waiting for a replacement part!  Dillon Precision Spare Parts Kits keep your machine running without waiting for replacement parts to arrive in the mail.

This is a Debris Catcher for Casefeeder. The Dillon Casefeeder has two holes in the bottom back of the bowl assembly. These holes allow any accumulated spent powder, polishing media or general crud to drain out of the bowl. This debris if left unchecked can fall all over your press or bench top.

Eemann Tech Springs Kit for Dillon XL650.

Mistakes happen, so be prepared. Our hammer-style Bullet Puller quickly removes your bullets without damaging the bullet or the case. The rubberized grip is easy on your hands and we have also added a rubber insert inside the hammer tip to make it easy on your bullets. Easy and convenient to use whether checking an occasional  reload or pulling hundreds of bullets.

Many customers choose to start reloading on their XL650/750 without the optional case feeder, and for them the new DAA Mini Case feeder will be a great addition to their press!

Designed for economy of motion when loading. Our new bullet tray is made of durable cast aluminum and is powder coated Dillon Blue. Fits RL 1050 / Super 1050.

Mounts directly to Strong Mount. Fits the Square Deal, RL550 series and XL650 strong mounts. For 1050 machines use #22215. You must have a strongmount in order to use this bullet tray.

Square Deal B Caliber Conversions allow you to change from one caliber to another in minutes.  Caliber conversions are available for common straight walled handgun and carbine cartridges from 32 S&W Long through 45 Colt.

An additional 6-tube Magazine Assembly for your Mini XL650 Case Feeder. It will hold about 150 pcs of 9mm brass, 130 pcs of .40 and about 120 pcs of .38S.

Dillon Square Deal B Primer slide bearing.

Primer chute for spent primers replaces the blue plastic spent primer cup and bracket on the Dillon XL650/750 reloading press. It completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers. Spent primers are routed through clear PVC tubing into plastic bottle which you fix with a holder on a strong mount. No more spent primers on floor.

Armanov Mirror for Dillon Case Feeder is a simple solution for keeping control of quantity of cases inside case feeder.