Accesories

Super 1050 Quick Change Kits allows you to leave your dies and powder charge set up and dedicated to a specific cartridge for faster, easier caliber changes.  Caliber changes require a caliber conversion kit (sold separately) in the caliber you want to add to your Dillon Super 1050. 

Designed to be used XL650/XL750, Suepr1050/RL1050/RL1100. The speed of the casefeeder is controlled by a potentiometer on the casefeed funnel. It allows you to infinitely regulate the speed from 0 to 8 RPM. The motor features a universal power supply for both domestic and foreign voltages. Adaptable to either 110 or 220 Volt, 60 or 50 hz, you simply swap out the plug to the style appropriate to your region. The bowl has an adjustable window cuff and cases deflector, for a larger range of cartridge capability. 

An automatic casefeed system, similar to the one used on Dillon's commercial-grade Super 1050 machine and the XL 650, is now available for your RL 550 series press.

This toolhead for Dillon Super 1050/RL1100 is a real game-changer. It is a drop-in upgrade for the original toolhead with great new features.

Quickly and easily convert your Square Deal B from one cartridge to another with the Square Deal B Quick Change and a Caliber Conversion Kit, sold separately.

Kit Includes:

• Toolhead
• Toolhead Stand
• Powder Measure
• Powder Die

With a quick change assembly and a caliber conversion kit (sold separately), you can convert your RL 550 Series press from one caliber to another in less than a minute. 

Includes: 

• Powder measure
• Powder die
• Toolhead 
• Toolhead stand

Until now, reusing military brass, with its crimped primer pockets, has been a tedious task. The Dillon solution is a remarkably simple device that bolts to your bench and allows you to swage the primer pockets with speed and ease. The case is supported from the inside, so you won't be tearing the rims off the brass. A tool steel, hardened swage rod (easy to change from large to small primers) simply rolls the crimp away. No reaming is necessary. Our unique compound cam leverage system assures not only ease of operation, but perfect alignment with each and every round. Sound simple? It is and it works. What's more, it's inexpensive. The Super Swage 600 comes with large and small swage rods, .22 and .30 caliber backup rods, and a 45ACP adapter. 

Square Deal B Caliber Conversions allow you to change from one caliber to another in minutes.  Caliber conversions are available for common straight walled handgun and carbine cartridges from 32 S&W Long through 45 Colt.

Sizing/Depriming Die
Our sizing/depriming dies feature a unique “floating decap assembly” with a snap spring that throws the spent primer off the pin and eliminates the problem of primer “draw back” that often occurs when decapping military brass. The primary feature of Dillon’s size die design the long, tapered carbide ring with a radiused opening remains unchanged. That radiused opening, and its importance to progressive reloading, is one of the reasons why our seat and crimp dies are better. We found a way of manufacturing these dies that has enabled us to make the lead-in radius even bigger! The bigger radius makes progressive loading with our equipment even smoother but that’s still only a part of the story.

Bullet Seating Die
Our new quick-disassembly seat die allows the user to disassemble and clean the seat die without losing adjustment. In this manner, bullet lube and shavings can be quickly removed from the die, thereby guaranteeing a constant seating depth. We’ve incorporated a “flip-flop” seating stem and a clip that enables you to remove the die insert and change the seating stem from round nose to semi-wadcutter without unscrewing a seating stem out of the die body. We’ve always included both types of seating stems, but the new double-ended design makes it a simple matter to remove a pin, reverse the seating stem, make any minor seating depth adjustments that may be necessary and go on loading in a fraction of the time it used to take.

Crimp Die
We’ve made it easy for you to remove the die insert for cleaning without having to change the critical crimp adjustment. Once your crimp die is set for the proper amount of crimp, you’ll never have to change it. This is especially good news for all of you who load lead bullets! Before, you had to unscrew the die from the toolhead and disassemble the die in order to remove any bullet lube or lead residue. Then, you had to start from square one to re-adjust the crimp. Those days are over. All you have to do now is pop a clip and the die insert drops into your hand for cleaning.

NOTE: All Dillon Pistol Die sets include our sizer/ decap die, seat die and a separate crimp die. (Taper crimp for autos; accu-crimp for revolvers.)

Increase the stability of your reloading bench with Dillon's new Strong Mounts. These heavy gauge steel Strong Mounts increase the machine's "foot-print" to over 10", spreading the load over the bench instead of stressing the leading edge. 

Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included. 

Mount height = 8 1/2"  or 21,6 centimeters. Raises your press above the work bench level and adds stability due to its larger footprint.

The Mini Mr.Bulletfeeder by DAA uses a 6-tube magazine system which holds roughly 100 bullets. It feeds into the same brilliantly reliable dropper die assembly as used on the Mr.Bulletfeeder.

Designed for economy of motion when loading. Our new bullet tray is made of durable cast aluminum and is powder coated Dillon Blue. Fits RL 1050 / Super 1050.

Dillon RL550 will produce match-quality ammo for over 160 different rifle and pistol calibers. These kits fit the RL300, RL450, RL550 series, AT500 and BL550 machines.

Mounts directly to Strong Mount. Fits the Square Deal, RL550 series and XL650 strong mounts. For 1050 machines use #22215. You must have a strongmount in order to use this bullet tray.

Bushings are made for a quick, simple and precise change of dies in the toolhead. No need for a complete toolhead change anymore, just twist and replace any bushing with the die of your choice. Change six dies on a Dillon Super 1050 / RL 1100 in seconds!

Don't risk downtime waiting for a replacement part!  Dillon Precision Spare Parts Kits keep your machine running without waiting for replacement parts to arrive in the mail.

These lighter weight Aluminum toolheads are machined from billet using the same precise CNC machining as our standard toolheads. Available in four different colors to allow you to quickly differentiate between calibers or load types.

No downtime with Dillon XL650 Spare Parts Set! This set includes everything you need to keep your XL650 operational, no more downtime, no more waiting for parts!

Spare parts kit specifically for your Super 1050 machine keeps your machine running also when you had a little accident. Don't risk downtime waiting for a replacement parts! Contains everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.

The DAA Magnetic Powder Check 2.0 (US Pat. Pending) is a great addition to any progressive reloading machine, helping to ensure the quality and safety of your reloaded ammo. The unique new design uses a high-tech Reed Sensor and a magnet assembled to the plunger Rod, to assess if the charge in the case is of the correct height.

Many customers choose to start reloading on their XL650/750 without the optional case feeder, and for them the new DAA Mini Case feeder will be a great addition to their press!

This toolhead is required for use with RT1500 Electric Case Trimmer. This combination is commonly used to trim 300 AAC Blackout on the XL650 & XL750.

Dillon sizing/depriming dies feature a unique "floating decap assembly" with a snap spring that throws the spent primer off the pin and eliminates the problem of primer "draw back" that often occurs when decapping military brass.

Dillon's new tool holder fits your RL 550 machine and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes the complete allen wrench set plus the one inch bench wrench.