Accessoires

Caliber conversion is not included.

Super 1050 Quick Change Kits allows you to leave your dies and powder charge set up and dedicated to a specific cartridge for faster, easier caliber changes.  Caliber changes require a caliber conversion kit (sold separately) in the caliber you want to add to your Dillon Super 1050.

This set consists of one Super 1050 powder measure nr. 20421 and one Super 1050 Toolhead nr. 20420. 

Be aware that the ratchet does not interchange between the Super 1050 and the RL1050 due to differences in length. 
If you have an RL1050, order toolhead #19399.

Electric Case Feed System allows you to simply dump fired, cleaned and deprimed hulls into the bowl.  The Case Feeder orients the hulls right side up and fills the feed tube automatically, turning itself on and off as necessary, to keep the case feed tube full.

The Casefeeder will hold 600 .38 Special cases or 500 .223 Rem cases. 

Be aware this casefeeder is without the Case feeder plate that is appropriate for the type of ammunition you wish to reload. See here the Case feeder plate you need. 

An automatic casefeed system, similar to the one used on Dillon's commercial-grade Super 1050 machine and the XL 650, is now available for YOUR RL 550 series press! You simply dump a quart of cases into the hopper and turn it on. The motor-driven disc fills the case feed tube, a micro-switch shuts off the motor when the tube is full, and automatically restarts it when low. This case feeder only works for the handgun calibers listed under the casefeed caliber conversions. Rifle cases are too tall to feed with this system.

With a quick change assembly and a caliber conversion kit (sold separately), you can convert your RL 550 Series press from one caliber to another in less than a minute. 

Includes: 

• Powder measure
• Powder die
• Toolhead 
• Toolhead stand

Until now, reusing military brass, with its crimped primer pockets, has been a tedious task. The Dillon solution is a remarkably simple device that bolts to your bench and allows you to swage the primer pockets with speed and ease. The case is supported from the inside, so you won't be tearing the rims off the brass. A tool steel, hardened swage rod (easy to change from large to small primers) simply rolls the crimp away. No reaming is necessary. Our unique compound cam leverage system assures not only ease of operation, but perfect alignment with each and every round. Sound simple? It is and it works. What's more, it's inexpensive. The Super Swage 600 comes with large and small swage rods, .22 and .30 caliber backup rods, and a 45ACP adapter. 

Square Deal B Caliber Conversions allow you to change from one caliber to another in minutes.  Caliber conversions are available for common straight walled handgun and carbine cartridges from 32 S&W Long through 45 Colt. 

Conversions include: 

• carbide size die (except .44-40)
• expander/powder funnel
• seat die
• crimp die
• shellplate
• locator buttons

Sizing/Depriming Die
Our sizing/depriming dies feature a unique “floating decap assembly” with a snap spring that throws the spent primer off the pin and eliminates the problem of primer “draw back” that often occurs when decapping military brass. The primary feature of Dillon’s size die design the long, tapered carbide ring with a radiused opening remains unchanged. That radiused opening, and its importance to progressive reloading, is one of the reasons why our seat and crimp dies are better. We found a way of manufacturing these dies that has enabled us to make the lead-in radius even bigger! The bigger radius makes progressive loading with our equipment even smoother but that’s still only a part of the story.

Bullet Seating Die
Our new quick-disassembly seat die allows the user to disassemble and clean the seat die without losing adjustment. In this manner, bullet lube and shavings can be quickly removed from the die, thereby guaranteeing a constant seating depth. We’ve incorporated a “flip-flop” seating stem and a clip that enables you to remove the die insert and change the seating stem from round nose to semi-wadcutter without unscrewing a seating stem out of the die body. We’ve always included both types of seating stems, but the new double-ended design makes it a simple matter to remove a pin, reverse the seating stem, make any minor seating depth adjustments that may be necessary and go on loading in a fraction of the time it used to take.

Crimp Die
We’ve made it easy for you to remove the die insert for cleaning without having to change the critical crimp adjustment. Once your crimp die is set for the proper amount of crimp, you’ll never have to change it. This is especially good news for all of you who load lead bullets! Before, you had to unscrew the die from the toolhead and disassemble the die in order to remove any bullet lube or lead residue. Then, you had to start from square one to re-adjust the crimp. Those days are over. All you have to do now is pop a clip and the die insert drops into your hand for cleaning.

NOTE: All Dillon Pistol Die sets include our sizer/ decap die, seat die and a separate crimp die. (Taper crimp for autos; accu-crimp for revolvers.)

Increase the stability of your reloading bench with Dillon's new Strong Mounts. These heavy gauge steel Strong Mounts increase the machine's "foot-print" to over 10", spreading the load over the bench instead of stressing the leading edge. 
Strong Mounts raise your machine 8", providing a comfortable work height for people who prefer to stand while reloading. 
All mounts come with all the fasteners necessary to mount your machine and are coated with a durable black wrinkle finish.

Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included.

This item does not check the accuracy of the powder charge, it checks for double-charges or no-charges only.

This mount is for both the RL 550 series presses as well as the XL650.  Mount height = 8 1/2"  or 21,6 centimeters.

Raises your press above the work bench level and adds stability due to its larger footprint.

Recommended by lots of reloaders.