Country
Select your country
1) Credit Card
The credit card payment is supported through the Bankart gateway.
2) Bank wire
You can pay for your order via bank transfer:
Beneficiary bank: Banka Intesa Sanpaolo d.d.,
Slovenska cesta 52,
1000 Ljubljana
BIC / Swift Code BAKOSI2XIBO
IBAN SI56 1010 0005 8347 823
Reference: your order number
Delivery
You order will be dispatched in one working day upon receiving your payment. We are shipping your orders with DHL, GLS or Pošta Slovenije. You can choose your shipping method when completing your order. Please read the price list below.
Pošta Slovenije
Standard letter
NOTE: this shipping option has no tracking number and the shipment is not insured
| od 50 g do 100 g | 1,85 eur |
| od 100 g do 250 g | 2,18 eur |
| od 250 g do 500 g | 3,96 eur |
| od 500 g do 1.000 g | 6,54 eur |
| od 1.000 g do 2.000 g | 10,61eur |
Standard package
NOTE: this shipping option has no tracking number and the shipment is not insured
| Do 2 kg | 13,67 eur |
| od 2 kg do 5 kg | 20,48 eur |
| od 5 kg do 10 kg | 25,00eur |
| od 10 kg do 15 kg | 36,11 eur |
| od 15 kg do 20 kg | 41,67 eur |
| od 20 kg do 25 kg | 49,99 eur |
The cesar-shop.com page and/or its suppliers shall make no representations about the suitability, reliability, availability, timeliness and accuracy of the information, products, services and related contents contained on the cesar-shop.com page. All such information, products, services and related content on this page are provided ‘as is’ and without a warranty of any kind. The cesar-shop.com page and/or its suppliers hereby disclaim all warranties and conditions with regard to this information, products, services and related content.
Download the product return form here.
The DAA Magnetic Powder Check 2.0 (US Pat. Pending) is a great addition to any progressive reloading machine, helping to ensure the quality and safety of your reloaded ammo.
The unique new design uses a high-tech Reed Sensor and a magnet assembled to the plunger Rod, to assess if the charge in the case is of the correct height.
In the new 2.0 design, the Sensitivity Adjustability feature has been removed, in favor of placing the Reed sensor in a fixed position on a custom built PCB board. That fixed position is one that sets the accepted height variance to about 2.0-2.5mm, which is what we found to be the best setting for all. More than sufficient to pick up a double-charge, debris in the case or a case without powder.
This design change now allows all components to be PCB mounted on the custom board – making the electronics much more reliable and long lasting.
An additional improvement to the DAA Magnetic Powder Check 2.0 is that the polymer shoe on the end of the plunger rod (which contacts the powder) has now been replaced with a brass CNC machined part, which helps to reduce the static electricity which could cause some powder to be lifted out of the case.
The DAA Magnetic Powder Check 2.0 assembles onto a station immediately after your powder dropper, screwing into a standard die thread 7/8-14 station. However, unlike other powder check systems, the DAA product does not require a dedicated hole drilled through the tool head next to the station! It can be used on ANY progressive reloader which has an available station after the powder drop.
A powder-check does require the use of a station in your toolhead, so if you do not currently have an available station, you may need to combine your seating and crimping into one station using a 2-in-1 seat/crimp die to free up a station. These too are available from DAA.
The DAA Magnetic Powder Check 2.0 is activated off the top rim of the case rather than the base of the shell plate, this means that no alarm will sound if no case is present. The powder sensing plunger (now with brass shoe) enters into the case mouth to rest on top of the charge and measure its height, sounding an alarm if the powder level is either too low or too high. It provides both an audible beep alarm as well as a bright red LED light when triggered.
The DAA Magnetic Powder Check 2.0 includes a replacement short plunger, suitable for use with rifle ammo. When using for rifle, simply replace the plunger, and assemble the steel rod upside down, using the end without the brass shoe to enter into the small case mouth. Parts included make this suitable to use with all pistol ammo (9mm and up) and for rifle from .223 and larger.
It’s compact size, slick and modern design, ease of setup and adjustability, make the DAA Magnetic Powder Check 2.0 the perfect accessory for your toolhead!
____________________
FEATURES:
- Can be used on all toolheads, does not require a dedicated hole near station.
- Assembles onto any 7/8-14 station
- Provides both an audible AND a visual alarms
- Acceptance range of powder level is approx. 2.0-2.5mm. Easily enough to trigger an alarm in case of a double-charge or no-charge situation.
- Includes all parts for both rifle and pistol use
- Activates off the rim of the case, so no alarm sound when no brass is present
- Slim and compact design
- Quality materials. Stainless Steel Rod, Brass shoe, with an aluminum red anodized die body. Rubber coated glass-fiber reinforced nylon for electronic housing
- Custom PCB board for all electronic parts ensures reliability and longevity
Customers also bought
© 2022 Cesar Shop