Accessori

Dillon's accessory handle gives your reloader an entirely new "feel." 
A roller handle reduces operator fatigue during long reloading sessions and makes primer seating easier. Fits the RL550 and XL650 loaders. 

Mistakes happen, so be prepared. Our hammer-style Bullet Puller quickly removes your bullets without damaging the bullet or the case. The rubberized grip is easy on your hands and we have also added a rubber insert inside the hammer tip to make it easy on your bullets. Easy and convenient to use whether checking an occasional  reload or pulling hundreds of bullets.

This Hammer Set comes with 4 collets.

LIFETIME WARRANTY.  MADE IN THE USA.

Collet information:
                                        Pistol                                      Rifle
Black (X-Small) -    .25 ACP                        Small Rifle Calibers
Blue (Small) -           .32 - .380                      17 Rem - 223 Rem
Green (Large) -       9mm - 10mm                       6mm - 8mm    
Red (X-Large) -      .41 - .45 ACP                  Belted Mags - 45-70

Extra powder dies allow you to move your powder measure from toolhead to toolhead without changing the "belling" adjustment.Toolhead not included. These are for the RL550, XL650,and RL450 equipped with the automatic powder system

Don't risk downtime waiting for a replacement parts!

Includes: 1 550 Brass Tip Set Screw, 1 550 Index Ball, 1 550 Index Ball Spring, 1 Seating Punch (Small), 1 Seating Punch (Large), 1 550 Primer Cup Spring, 1 550 Slide Return Spring, 1 Cartridge Spring, 1 Bellcrank Cube, 2 Magazine Orifices (small), 2 Magazine Orifices (large), 2 Pickup Tube (Large, Green tips), 2 Pickup Tubes (Small, Yellow Tips), 2 pickup tube retaining Clips, 1 Failsafe Shoulder Washer, 1 Tinnerman Insert, 4 Locator Pins(one each #s 1,2,3,4), 1 primer cup (small), 1 primer cup (large), 1 ejector wire, 1 toolhead pin, 1 dispensing tip (Large), 1 dispensing tip (Small), spacer bar retaining plug 

Sizing/Depriming Die 
Our sizing/depriming dies feature a unique "floating decap assembly" with a snap spring that throws the spent primer off the pin and eliminates the problem of primer "draw back" that often occurs when decapping military brass. The primary feature of Dillon's size die design the long, tapered carbide ring with a radiused opening remains unchanged. 
That radiused opening, and its importance to progressive reloading, is one of the reasons why our seat and crimp dies are better. We found a way of manufacturing these dies that has enabled us to make the lead-in radius even bigger! The bigger radius makes progressive loading with our equipment even smoother but that's still only a part of the story. 

The ultimate in convenience for keeping your reloading bench clean and uncluttered. You will find in an instant what you need to make the switch from one to another caliber.  

This stand is for the RL550 Series and XL650 machines only.

Don't Adjust dies when switching calibers. These Precision tool holders hold your dies in perfect alignment, making caliber changes quick and easy. 

The Dillon RL 1050 Cartridge Bin is used on the Super 1050 progressive reloading machine to catch the loaded cartridges. This bin is 260mm long, 110mm wide by 120mm deep and is great for storing just about anything.

Dillon's blue AkroBins are made of virtually unbreakable heavy-duty polypropylene. They're unaffected by weak acids and alkalis and are also water, rust and corrosion proof. They are great for reloaders requiring extra capacity, or those loading several calibers, bullet weights, bullet shapes, etc. AkroBins can be used for storing almost anything!

This heavy-duty nylon cover comes equipped with a D-ring, allowing the zipper to be locked. 

If you have a Mr. Bulletfeeder mounted onto your 1050, this cover will still cover the machine, but you must orient the cover so that the zipper is on the LEFT side, not the back. 

Powder funnels to activate the Dillon automatic powder system. 

Funnels labelled "oversize"require the separate XL Powder Die #21253 

Order from the drop down menu below. 

• Caliber Conversion Chart for the RL300, RL450, RL550 Series, AT500 and BL550  
• Caliber Conversion Chart for the XL650
• Caliber Conversion Chart for the Super 1050
• Caliber Conversion Chart for the Square Deal B 

This unit includes the complete allen wrench set 

This packcloth nylon machine cover comes equipped with a D-ring, allowing the heavy-duty zipper to be locked.Covers XL650 with or without the case feeder attached. Additionally, use this cover for the RL550 when equipped with the optional handgun caliber case feeder. 

If you have an XL650 equipped with a Mr. Bulletfeeder, use the 1050 cover. 

These lighter weight Aluminum toolheads are machined from billet using the same precise CNC machining as our standard toolheads. Available in four different colors to allow you to quickly differentiate between calibers or load types.

Powder measure knob for the Dillon Powder thrower with click for easy adjustment.

Unlike other competitors, this knob is laser etched with 50 graduations giving the user reference points when adjusting. Two steel spring loaded balls generate smooth and repetable clicks. Easy to setup between multiple loads or even calibres, very precise 50 clicks per turn. Testing on pistol powders one click increments is about 0.015 grains. This is a very precise setting. 

Simple installment and a tremendous help for if you are using different loads with visual scale.

The Dillon Factory screw requires a wrench when adjusting the amount of powder to dispense in your powder thrower. This knob is labeled with graduations for orientation and easily allows the user to hand adjust the powder dispenser without the need for tools. Works on Dillon 1050, 650,550, SDB and 900 presses.

Both parts are made from aircraft grade aluminum - anodized black color

1 x laser etched knob assembly consisting of one knob frame and one adjusting knob

1 x allen wrench for the grub-screws to fasten

Dillon Powder Bar shown only for reference and is NOT included.

With a quick change assembly and a caliber conversion kit (sold separately), you can convert your RL 550 Series press from one caliber to another in less than a minute. 

Includes: 

• Powder measure
• Powder die
• Toolhead 
• Toolhead stand

Increase the stability of your reloading bench with Dillon's new Strong Mounts. These heavy gauge steel Strong Mounts increase the machine's "foot-print" to over 10", spreading the load over the bench instead of stressing the leading edge. 
Strong Mounts raise your machine 8", providing a comfortable work height for people who prefer to stand while reloading. 
All mounts come with all the fasteners necessary to mount your machine and are coated with a durable black wrinkle finish.

The Dillon Precision Universal Decapping Die is a standard 7/8"-14 die with a solid, hardened steel, decapping pin in an unlined steel die body.  The Universal Decapping Die allows you to remove spent primers without any resizing of the brass. 

• Works with all standard pistol and rifle cartridge sizes from 22 through 45. 
• Allows you to remove spent primers prior to trimming with our RT1500 Electric Case Trimmer.
• The Universal Decapping die allows brass to be deprimed prior to cleaning when processing brass.  Cleaner primer pockets help to maintain consistent primer seating depth and ignition.
• The Universal Decapping die works in all machines that accept standard 7/8"-14 dies.

Dillon's new Toolholder fits your Square Deal B and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes the complete allen wrench set plus the new Square Deal bench wrench.

The Dillon Magnum Rifle Powder bar throws charge weights from 50 grains up to approximately 72 grains of extruded powder, or up to approximately 82 grains of ball/spherical powder

Dillon's new Toolholder fits your XL 650 and ensures that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench! This unit includes a complete allen wrench set plus the one inch bench wrench.

A characteristic of virtually all progressive reloading machines, regardless of brand, is that the dies are set rather close together. When you are first setting up a "naked" machine, there is plenty of wrench room, but if you have a need to adjust a die afterward, it often requires a delicate touch to maneuver a lock ring on a crowded toolhead. 
Dillon Precision has addressed this in two ways. We now offer new 1" die lock rings and a 1" Bench Wrench to fit them. This combination gives much more room to re-adjust dies after they're already mounted. The opposite end of our new wrench is a 7/16" box-end for adjusting the Powder Bar of any Dillon Powder Measure. Our new lock rings fit any standard 7/8" x 14 dies.

he DAA Output Chute can be attached to any reloading press, hanging onto the same bracket which usually holds the Akro-Bin, and replacing it.

The long, 120cm (4ft) feed spring enables you to run the ammo down to a container on the floor, sparing you the need to empty that bin as you reload, and uncluttering your reloading press.

The DAA XL650 Debris-Out Casefeeder Adaptor is the answer to a real problem many reloaders are all too familiar with: when cleaning brass with corncob or other dry media, often small bits of media remain mixed with the brass, and are fed down the case feeder tube. When they reach the tighter diameter of the adaptor tube, they wedge against the cases, causing a feeding jam. You then have to stop reloading, take apart the feeding pipe, clear the jam and only then continue.

But with the new DAA XL650 Debris-Out Casefeeder Adaptor, which replaces the original Dillon case feeder adaptor on your XL650, the slots cut in the pipe allow the debris to fall out the sides onto the small collection tray (we like to keep our workbench clean and neat!) and the chances of a jam-up are greatly reduced.

A drop on fit to your Dillon XL650. 

Not suitable for use on other Dillon reloading models, and cannot be used in conjunction with the DAA XL650 Mini case feeder.

Stop switch enables you to lock the case feed shuttle back to prevent cases from feeding into the shell plate when cycling the press. Easy installation. Just screw with two original bolts. Built in hinge made for super easy usage, cycle machine to down position and enable stop switch. Built in bulge that locks switch in case ON position.  Great for clearing the shell plate, maintenance, setup, or any time you don’t want cases to feed.  Made from high quality steel. This product is suitable for Dillon 1050 only.

Primer cam Index Stop Switch for Dillon Precision XL-650 and SL-900 Progressive Reloading Press. The switch moves to turn ON and OFF the index by bypassing the indexing lever on the primer feed assembly. Integrated spring ball works as clickable position capture. Use the factory screw to install. Material for the base is 6082 aluminium and material for the ramp is Delrin (POM-C). Spare ramps can be ordered separately. Super simple install. Just unscrew original primer cam and use same bolt to attach this stop switch.

The DAA Bullet Puller is a must-have for serious reloaders. This tool takes all the hassle out of separating your used cases from the bullet and powder. The tool itself is formed from high-quality plastic with an aluminum rod to ensure many years of durable performance.

The DAA Bullet Puller can be used for ammunition of all sizes ranging from .17 Remington to .50/70 Government cases. This tool comes with an extra set of three collets, should the originals happen to break. The tool itself is virtually indestructible and makes quick work of disassembling your ammunition for reloading.

Until now, reusing military brass, with its crimped primer pockets, has been a tedious task. The Dillon solution is a remarkably simple device that bolts to your bench and allows you to swage the primer pockets with speed and ease. The case is supported from the inside, so you won't be tearing the rims off the brass. A tool steel, hardened swage rod (easy to change from large to small primers) simply rolls the crimp away. No reaming is necessary. Our unique compound cam leverage system assures not only ease of operation, but perfect alignment with each and every round. Sound simple? It is and it works. What's more, it's inexpensive. The Super Swage 600 comes with large and small swage rods, .22 and .30 caliber backup rods, and a 45ACP adapter.